1986 Chevrolet Corvette Drivetrains
More 1986 Chevrolet Corvette Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1986 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1986 Chevrolet Corvette Drivetrains
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
Yukon Gear – Stub Axle Snap Ring For Dana 44HD, Dodge Viper (Part No.33523)
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.LM603049)
from
$12.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Rear Drive Shaft (Part No.936-290)
from
$953.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)
from
$271.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1330 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.062″ cap diameter
- U-bolt style
National – Bearings (Part No.DB-53313)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Felpro – DIFFERENTIAL GASKET (Part No.RDS 13314-1)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Yukon Gear – Carrier Installation Kit For Dana 44HD Differential (Part No.57004)
from
$204.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44HD differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44HD
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)
from
$192.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Powertrax – Grip LOK Traction System (Part No.LK444430)
from
$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Driveworks – Universal Joint (Part No.DW-270)
from
$27.49
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Pinion Nut (Part No.33150)
from
$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
- 7/8″ x 16 thread
- 1 1/8″ socket
National – Bearings (Part No.B-2412)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (sold by each) (Part No.615-144)
from
$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Pinion Shim Kit (Part No.1104)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
National – Shaft Repair Sleeve (Part No.99170)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr (Part No.30127)
from
$68.99
58-64 Chevy Passenger axle seal, USE w/ BCARW607NR.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle seal
- Fits 1958-1964 GM passenger car
- For use with RW607NR bearing
Yukon Gear – Side Yoke Axle Replacement Seal For Dana 44 Ica Vette And Viper (Part No.30097)
from
$36.99
Side yoke axle replacement seal for Dana 44 ICA Vette and Viper. 2.13″ OD.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Side seal
- Fits Dana Spicer 44 in 1980-1983 Corvette
- 2.13″ O.D.
Motive Gear – Differential Ring and Pinion (Part No.D44-513GX)
from
$244.99Product Features:
- DANA-44 R/P 5.13 RUBICON – THICK HAS BOTH 7/16 & 3/8″ BOLT PATTERN
Popular 1986 Chevrolet Corvette Drivetrains Categories
1986 Chevrolet Corvette Drivetrains
You count on your 1986 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 107 Drivetrains ranging in price from $1.49 to $953.99, you’re sure to find everything you need for your 1986 Chevrolet Corvette.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, DriveWorks, and Spicer. 1986 Chevrolet Corvette Drivetrains start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 221 extensive product reviews on 1986 Chevrolet Corvette Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1986 Chevrolet Corvette below to get started!
Top-Rated Drivetrains Brands For Your 1986 Chevrolet Corvette
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Idemitsu Drivetrains
You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 1986 Chevrolet Corvette back on the road. Some of the top-rated Idemitsu products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1986 Chevrolet Corvette, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1986 Chevrolet Corvette Drivetrains
What are the most purchased Drivetrains for the 1986 Chevrolet Corvette?
Out of 107 Drivetrains for the 1986 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1986 Chevrolet Corvette Drivetrains?
Top-rated Drivetrains for your 1986 Chevrolet Corvette based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
