1986 Chevrolet Corvette Camshafts
More 1986 Chevrolet Corvette Camshafts
Find your specific 1986 Chevrolet Corvette original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1986 Chevrolet Corvette Camshafts
Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)
from
$1566.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde
Product Features:
See More
Product Features:
- Iron Camshaft Material
- 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
- Roller Lifter Type
- Valve Springs Required
- Assembly Lubricant Included
Competition Cams – Magnum 224/224 Hydraulic Roller Cam and Lifter Kit Chevrolet Big Block 396-454 (Part No.CL11-430-8)
from
$1147.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)
from
$366.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8 (Part No.2162)
from
$313.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
ARP Auto Racing – Chevy Geniii/Ls Series Small Block, 20 Mm Under Head L, 10 Mm Socket Size (Part No.134-1002)
from
$9.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.
Product Features:
See More
Product Features:
- Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
- Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
- Increased Material Strength Overcomes Valve Train Harmonics And Stress
- Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
- Set of 4
- 180,000 PSI
- .787″ Underhead Length
Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)
from
$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.
Product Features:
See More
Product Features:
- Black oxide finished steel
- Includes (3) grade 5 bolts & locking plate
- Fits Chevrolet Small and Big Block without OE roller cam
- Tabs bend up around bolt head to secure
Mr. Gasket – Special Cam Bolt (Part No.944G)
from
$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.
Product Features:
See More
Product Features:
- Black oxide coated Grade 5 steel
- Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
- Can be used as OE replacement
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$533.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam for Chevrolet Big Block 396-454 (Part No.11-600-4)
from
$542.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)
from
$529.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Mahle – Camshaft Retainer (Part No.A4355425751MAH)
from
$31.69
Camshaft Retainer
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.3771)
from
$14.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Victor Reinz – Engine Camshaft Retainer Plate (Part No.71-17533-00)
from
$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-200)
from
$27.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.925″ Long, Used with Old Style 3-Spoke Sheet Metal Covers.
Product Features:
See More
Product Features:
- All components are Heat-Treated Steel
- Needle Roller Bearing
- Fully Rollerized Operation.
Mr. Gasket – Cam Button Spacer (Part No.1183)
from
$14.99
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent further movement. A worn or missing cam thrust bumper will result in too much end play, resulting in timing issues.
Product Features:
See More
Product Features:
- Mandatory to prevent cam walk in roller cam conversions
- Helps maintain accurate timing
- Made from aluminum
Mr. Gasket – Cam Button Spacer (Part No.1180)
from
$15.99
Mr. Gasket cam buttons are an absolute necessity for roller cam conversions and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent movement. If you have an engine already converted, a worn or missing cam thrust bumper will result in too much end play, resulting in erratic timing and should be checked.
Product Features:
See More
Product Features:
- Mandatory to prevent cam walk in roller cam conversions
- Helps maintain accurate timing
- Made from aluminum
Mr. Gasket – Cam Button Spacer (Part No.1181)
from
$12.79
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent movement. If you have an engine already converted, a worn or missing cam thrust bumper will result in too much end play, resulting in erratic timing and should be checked.
Product Features:
See More
Product Features:
- Mandatory to prevent cam walk in roller cam conversions
- Helps maintain accurate timing
- Made from aluminum
Sealed Power – Engine Camshaft Bearing Set (Part No.1145M)
from
$43.99
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85B)
from
$35.99
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does odd number adjustment 0-7 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Sealed Power – Engine Camshaft Bearing Set (Part No.1923M)
from
$53.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1235M)
from
$45.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Dorman – Steel Cup Expansion Plug 2-7/31 In. SC, Height 0.260 (sold by each) (Part No.555-081)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each) (Part No.555-030)
from
$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.555-030.1)
from
$2.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1986 Chevrolet Corvette Camshafts Categories
1986 Chevrolet Corvette Camshafts
Maybe you’re in the middle of a full rebuild of that 1986 Chevrolet Corvette. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 18 different Camshafts in our inventory ranging from $1.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1986 Chevrolet Corvette running smoothly.
Camshafts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Chevrolet Corvette. Sealed Power, Dorman, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1986 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 1986 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1986 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular Mr. Gasket Camshafts
We carry Mr. Gasket parts in our stock across Engine Camshaft Bolts categories, plus more. For a 1986 Chevrolet Corvette, our most popular Mr. Gasket Camshafts include:
Top 1986 Chevrolet Corvette Camshafts from Edelbrock
Edelbrock products are another trusted brand when it comes to Camshafts for your 1986 Chevrolet Corvette. Popular Edelbrock parts include:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
FAQs for 1986 Chevrolet Corvette Camshafts
What are the most purchased Camshafts for the 1986 Chevrolet Corvette?
Out of 18 Camshafts for the 1986 Chevrolet Corvette, the most popular in our inventory are:
from
$1.49
This product is not rated
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
Camshaft Plugs
