1986 Chevrolet Camaro Engine Kits
More 1986 Chevrolet Camaro Engine Kits
Find your specific 1986 Chevrolet Camaro original or aftermarket Engine Kits below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1986 Chevrolet Camaro Engine Kits
GM Genuine Parts – Engine Cooling Fan Motor (Part No.15-8498)
from
$115.99
GM Genuine Parts Engine Cooling Fan Motor Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine cooling fan motor kits supply power to the engine cooling fan so that it can move air across the radiator and A/C condenser, helping to cool the system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Necessary components for sending power to the engine cooling fan
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.12620)
from
$214.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.10610)
from
$219.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.10540)
from
$227.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.10500)
from
$261.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.12620P)
from
$264.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Unit machined to .010/.010 maximum.
- Includes matching rod and main bearings.
- Journals Micropolished.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.10620)
from
$218.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Mr. Gasket – Ultra Seal: Oil Pan Stud Kit (Part No.6316)
from
$75.99
The black finish grade 5 bolts have a bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
Product Features:
See More
Product Features:
- Bullet Tip Design
- Aid Alignment and Installation
- Grade 5 Studs w/ Black Finish
- Zinc Plated Self-Locking Nuts
- Assures Positive Gasket Seal
- The Professionals Choice
ARP Auto Racing – For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers (Part No.230-7003)
from
$7.29
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
- Hi-Volume
- 3.125″
ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)
from
$6.99
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
Mr. Gasket – Engine Dress-Up Kit (Part No.9834BP)
from
$134.99
Includes: 2 short flat black valve covers 2 valve cover gaskets 1 flat black push-on breather 1 flat black dipstick & tube 1 flat black timing chain cover 1 flat black timing tab 1 rubber grommet for valve cover PCV hole 1 breather grommet
Product Features:
See More
Product Features:
- Ideal Starter Kit
- Enhances Appearance
Mr. Gasket – Chrome Dress-Up Kit (Part No.9834)
from
$123.99
Includes: 2 short chrome valve covers 2 valve cover gaskets 1 chrome push-on breather 1 chrome dipstick & tube 1 chrome timing chain cover 1 chrome timing tab 1 rubber grommet for valve cover PCV hole 1 breather grommet.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes W/valve Cover Gaskets
Edelbrock – Performer RPM 435 HP Top End Kit for 1957-86 Chevy 327-350 V-8 Engines (Part No.2099)
from
$4883.99Product Features:
- Matched Parts Available Under One Part Number
- All In One Box Convenience
- Make Things Easier In Parts Selection
- Includes Almost Everything You Need
Edelbrock – Performer RPM 435 Top End Kit for 1987 & later Chevy 383 V-8 Engines (Part No.2097)
from
$4311.99Product Features:
- Matched Parts Available Under One Part Number
- All In One Box Convenience
- Make Things Easier In Parts Selection
- Includes Almost Everything You Need
Edelbrock – Performer RPM 410 Top End Kit for 1957-86 Small-Block Chevy 350 Engines (Part No.2098)
from
$3990.99Product Features:
- Matched Parts Available Under One Part Number
- All In One Box Convenience
- Make Things Easier In Parts Selection
- Includes Almost Everything You Need
Popular 1986 Chevrolet Camaro Engine Kits Categories
1986 Chevrolet Camaro Engine Kits
Maybe you’re in the middle of a full rebuild of that 1986 Chevrolet Camaro. Maybe you just need a couple of Engine Kits. Either way, Advance Auto Parts has 10 different Engine Kits in our inventory ranging from $6.99 to $4,883.99. That means you can find the exact parts or products you need to keep that 1986 Chevrolet Camaro running smoothly.
Engine Kits are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Chevrolet Camaro. ARP Auto Racing, Crankshaft Rebuilders, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Kits for your 1986 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Kits to keep your 1986 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Kits Brands To Make Your 1986 Chevrolet Camaro Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Engine Kits make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Engine Kits brands and parts.
Popular Crankshaft Rebuilders Engine Kits
We carry Crankshaft Rebuilders parts in our stock across Engine Crankshaft Kits categories, plus more. For a 1986 Chevrolet Camaro, our most popular Crankshaft Rebuilders Engine Kits include:
FAQs for 1986 Chevrolet Camaro Engine Kits
What are the most purchased Engine Kits for the 1986 Chevrolet Camaro?
Out of 10 Engine Kits for the 1986 Chevrolet Camaro, the most popular in our inventory are:
from
$7.29
This product is not rated
For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers
Engine Oil Deep Sump Kits
