1986 BMW 735i Suspension Parts
More 1986 BMW 735i Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1986 BMW 735i, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1986 BMW 735i Suspension Parts
MOOG – Strut Bellows (Part No.K90464)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Driveworks – Strut Bellow (Part No.DW-K90466)
from
$33.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
KYB – Jounce Bumper and Bellows (Part No.SB105)
from
$30.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Sachs – Strut Bump Stop Service Kit (Part No.L3045938647SAC)
from
$88.53
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.
Product Features:
See More
Product Features:
- SACHS Service Kits help to prolong the life and performance of the shock or strut.
- Always replace your Service kits in pairs.
- Are built with design and quality that matches or exceeds OE quality
KYB – Jounce Bumper and Bellows (Part No.SB107)
from
$30.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – OESpectrum Strut (Part No.71236)
from
$66.29
Monroe OESpectrum struts are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco’s “Twin Technology Active Control System”, an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco’s Twin Technology consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
Product Features:
See More
Product Features:
- All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction
- Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort
- Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
- Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
- Hardened and Chrome Plated Piston Rod: Long service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
KYB – Excel-G Shock Absorber (Part No.L400050807KYX)
from
$104.10
The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Calibrated to compensate for worn suspensions
- Components and valving are designed specifically for each application
- The best choice to restore OE performance and normal driving conditions
- Built with quality that matches or exceeds OE
- Coverage for domestic and import cars, trucks, vans, minivans, and SUVs
Delphi – Suspension Wishbone, 1 Pack (Part No.L200030429DEL)
from
$71.33
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Product Features:
See More
Product Features:
- Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
- Control arms utilize robot welding for consistent performance and quality
- Delphi machines the ball studs to Micron tolerances to guarantee durability and smooth Joint operation
- Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
TRW – Suspension Wishbone (Part No.L200030364TRW)
from
$106.64
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
TRW – Suspension Wishbone (Part No.L200030429TRW)
from
$70.15
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
TRW – Suspension Wishbone (Part No.L200030428TRW)
from
$70.09
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
International Suspension Group – ISG Wishbone (Part No.L200030428ISG)
from
$63.76
The ISG control arm is designed and manufactured to exact OEM specifications providing original equipment quality, durability and performance. ISG control arms incorporate ball joints and include bushings that are either original equipment or provide OE-equivalent quality, fit and form.
Product Features:
See More
Product Features:
- Designed to fit right the first time, all geometry and pivot axis match OEM placement
- Manufactured at TS16949 facilities (OEM grade)
- All parts are designed and quality approved using PPAP (Production Part Approval Process)
- Available in Forged Steel, Stamped Steel & Forged Aluminum (all meet or exceed OEM specifications)
- Service kits are included where applicable, nuts, washers, cotter pins, & zerk fittings
- European applications benefit from low friction ball sockets for precise steering feel
TRW – Suspension Wishbone (Part No.L200030365TRW)
from
$106.86
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
FEQ – Suspension Wishbone (Part No.L200030365FEQ)
from
$31.63
The FEQ control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Popular 1986 BMW 735i Suspension Parts Categories
1986 BMW 735i Suspension Parts
You count on your 1986 BMW 735i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 6 Suspension Parts ranging in price from $30.99 to $70.09, you’re sure to find everything you need for your 1986 BMW 735i.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 5 different brands like Moog, KYB, and DriveWorks. 1986 BMW 735i Suspension Parts start as low as $30.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1986 BMW 735i Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1986 BMW 735i below to get started!
Top-Rated Suspension Parts Brands For Your 1986 BMW 735i
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 BMW 735i running right for years to come. In our inventory you’ll find brands like Moog, KYB, DriveWorks, and even more.
Popular KYB Suspension Parts
You’ll find popular KYB brand products across Shocks and Struts. All are waiting to get your 1986 BMW 735i back on the road. Some of the top-rated KYB products in these categories are:
FAQs for 1986 BMW 735i Suspension Parts
What are the most purchased Suspension Parts for the 1986 BMW 735i?
Out of 6 Suspension Parts for the 1986 BMW 735i, the most popular in our inventory are:
