1985 Toyota Cressida Belts and Hoses

Essential 1985 Toyota Cressida Belts and Hoses

Dayco – Bottom Cog V-Belt; 36 Inch Long, Exact Fit Premium Quality (Part No.15360)

Bottom Cog V-Belt; 36 Inch Long, Exact Fit Premium Quality

from

$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9360)

Automotive XL« High Capacity V-Belt

from

$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

ContiTech – Drive V-Belt (Part No.W100033123CON)

Drive V-Belt

from

$11.29
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.39017)

Automotive V-Belt, Driveworks

from

$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 23 Inch Long, 1.25 Inch Inner Dia. (Part No.81071)

Flex Radiator Hoses; EPDM Rubber, 23 Inch Long, 1.25 Inch Inner Dia.

from

$19.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter (Part No.C70756)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter

from

$11.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.25" Diameter (Part No.D71178)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.25" Diameter

from

$16.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

MacKay – Molded Radiator Hose (Part No.G2000166515MKY)

Molded Radiator Hose

from

$20.78
MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:
  • Excellent resistance to high temperatures
  • Resists chemical attack (oils, fuels etc.)
  • Excellent Ozone resistance
  • Good resistance to abrasion
  • High resistance to vibration
See More

Dayco – Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count (Part No.5050510)

Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count

from

$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K040365)

Micro-V« Serpentine Drive Belt

from

$23.79
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.5040338)

Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count

from

$28.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 36.81 Long, 4 Rib Count (Part No.5040368)

Poly Rib Belt Serpentine Belt; 36.81 Long, 4 Rib Count

from

$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25255)

Vulco-Flex½ II Flexible Coolant Hose

from

$38.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.28" Diameter (Part No.B70939)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.28" Diameter

from

$27.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length (Part No.80414)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length

from

$12.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (Part No.87625)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length

from

$15.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 9 1/4 Inch Length (Part No.86810)

Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 9 1/4 Inch Length

from

$11.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87844)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$35.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Heater Hose (Part No.18738)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Goodyear – Molded Heater Hose (Part No.R303037738GDY)

Molded Heater Hose

from

$3.73
Designed to transfer glycol-based coolants to and from the heater core, by-pass to the radiator, as well as through other components in the vehicle’s coolant system.

Product Features:
  • EpdM tube and cover with synthetic knit reinforcement.
  • Meets or exceeds SAE 20R4Ec class d1 specifications as well as many original equipment specifications.
  • Resistant to Electrochemical degradation (EcR).
  • compatible with most coolants including ethylene glycol and propylene glycol-based coolants, as well as organic acid modified, long life coolants.
  • Temperature range of -40F to +275F (-40c to +135c)
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 2 Inch Long, 1.25 Inch Inner Dia. (Part No.81061)

Flex Radiator Hoses; EPDM Rubber, 2 Inch Long, 1.25 Inch Inner Dia.

from

$30.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia. (Part No.81031)

Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia.

from

$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)

Vulco-Flex« II Flexible Coolant Hose

from

$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.13" Long, 1.25" Diameter (Part No.D70897)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.13" Long, 1.25" Diameter

from

$14.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25253)

Vulco-Flex½ II Flexible Coolant Hose

from

$26.99
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.31" Diameter (Part No.D70783)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.31" Diameter

from

$15.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

1985 Toyota Cressida Belts and Hoses

You count on your 1985 Toyota Cressida to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 17 Belts and Hoses ranging in price from $4.99 to $79.99, you’re sure to find everything you need for your 1985 Toyota Cressida.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 5 different brands like Dayco, Imperial, and Bando. 1985 Toyota Cressida Belts and Hoses start as low as $4.99!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 197 extensive product reviews on 1985 Toyota Cressida Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 37.01 Long, 7 Rib Count with 5.0 stars and Automotive RPF Raw Edge Cogged Belt with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1985 Toyota Cressida below to get started!

Top-Rated Belts and Hoses Brands For Your 1985 Toyota Cressida

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Toyota Cressida running right for years to come. In our inventory you’ll find brands like Dayco, Imperial, Bando, and even more.

Popular Driveworks Belts and Hoses

You’ll find popular Driveworks brand products across Serpentine and V Belts. All are waiting to get your 1985 Toyota Cressida back on the road. Some of the top-rated Driveworks products in these categories are:
Automotive V-Belt, Driveworks
from $4.99
(1)
Automotive V-Belt, Driveworks
V-Belts

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1985 Toyota Cressida, and some of our most reviewed Dayco parts include:

FAQs for 1985 Toyota Cressida Belts and Hoses

What are the most purchased Belts and Hoses for the 1985 Toyota Cressida?

Out of 17 Belts and Hoses for the 1985 Toyota Cressida, the most popular in our inventory are:
1/2" x 12' Engine Oil Cooler Hose
from $48.49
This product is not rated
1/2" x 12′ Engine Oil Cooler Hose
Engine Oil Cooler Hoses
Metal Line Kit for Engine Oil Coolers
from $79.99
This product is not rated
Metal Line Kit for Engine Oil Coolers
Engine Oil Cooler Hoses

What are the top-rated 1985 Toyota Cressida Belts and Hoses?

Top-rated Belts and Hoses for your 1985 Toyota Cressida based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 37.01 Long, 7 Rib Count
from $26.49
(1)
Poly Rib Belt Serpentine Belt; 37.01 Long, 7 Rib Count
“I want the best for my 1985 Celica Supra, That is why I brought the Poly Rib Belt.”
Automotive RPF Raw Edge Cogged Belt
from $24.49
(1)
Automotive RPF Raw Edge Cogged Belt
“Also known as Dayco Upgrades. Still going strong on my ’84 Toyota Supra. However my alternator is acting erratic going from 10 volts up to 18 volts. I”
V-Belt, Top Cog
from $14.29
(1)
V-Belt, Top Cog
“O.K”