1985 Oldsmobile Toronado Performance and Racing Products
Find Your Specific 1985 Oldsmobile Toronado Performance and Racing Products
Below you will find various in-demand Oldsmobile Performance and Racing Products, components and accessories for your 1985 Toronado. Advance Auto Parts has popular Toronado parts like Performance Steering Products, Performance Ignition Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Toronado model years including
1983,
1984,
1986,
1987,
1988,
1989,
1990,
1991,
1992 and more. Select a category of 1985 Oldsmobile Toronado Performance and Racing Products below and start saving instantly.
Popular 1985 Oldsmobile Toronado Performance and Racing Products Categories
Essential Performance and Racing Products for 1985 Oldsmobile Toronados
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
B & M – Transpak (Part No.30235)
from
$152.99
Shift Improver Kits – Buick, Chevrolet, GMC, Olds, Pontiac – 1968 to 1981 TH-350 and M38 Application: 1968 to 1981 TH-350 and M38 (for TH-350C use Transpak # 30235) Recalibrate your automatic transmission for optimum performance and extended life! Provides crisp shifts on any stock automatic transmissions. Elimination of soft sluggish shifts, shift overlap, and excess wear on clutches and bands due to slippage. Improves transmission life. Transmission removal not required. The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are a few dollars and some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Just ask the thousands of satisfied customers that have installed one in their transmissions! Stage 1 – Heavy Duty Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. Stage 2 – Street/Strip Provides very positive shifts for high performance street use or for competitive events. This model is for the enthusiast who wants the hardest, quickest possible shift.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Edelbrock – Performer Buick 3.8L, 4.1L V6 Intake Manifold (Part No.5486)
from
$381.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Not for C-3 and C-4 Electronic Fuel Mngmt Systems
Edelbrock – Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp) (Part No.70003)
from
$1113.99Product Features:
- Designed To Add Power In Stages
- Softens The Hit Of The Nitrous System
- Control Excessive Tire Spin
- Control Violent Chassis Reaction
- Allows You To Adjust The 1st Stage
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Rotor; GM HEI (Part No.8410)
from
$13.29
Replacement rotor for Chevrolet HEI style distributors.
Product Features:
See More
Product Features:
- For HEI distributors
- Resist carbon tracking
- Low resistance brass
- Max voltage transfer
- Molded from insulated material
B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)
from
$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Base Trimmed For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)
from
$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)
from
$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Tork Master 3000 (Part No.20402)
from
$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)
from
$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Mr. Gasket – Oil Pan Bolt Kit (Part No.6086)
from
$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70090)
from
$875.99Product Features:
- Designed For Carbureted V8s
- Power Increases From 100-250 HP
- Precision EDM Machined Spray Bars
- Simple To Install
Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)
from
$842.99Product Features:
- Best Way To Get A Major Power Increase
- Power Increases From 50-70 HP
- Work With Stock ECU
- Simple Installation
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)
from
$538.99
The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
- Can Easily Calibrate with Rods and Jets
Mr. Gasket – Valve Cover (Part No.9422)
from
$98.99
These Mr. Gasket chrome plated steel valve covers have a smooth top with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.
Product Features:
See More
Product Features:
- Fits Oldsmobile 260-455 engines
- Sold as a pair
- Chrome plated steel construction
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Upgrade your 1985 Oldsmobile Toronado with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1985 Oldsmobile Toronado, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Toronado functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Performance and Racing Products for the 1985 Oldsmobile Toronado, designed to meet your needs without breaking the bank.
From
Performance Steering Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Oldsmobile Toronado at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $9.99 to $1,138.99, with
an average price of $362.00.
Our 51 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1985 Oldsmobile Toronado without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Oldsmobile Toronado, we stock popular OEM and aftermarket Performance and Racing Products from top names
like MSD Ignition, Mr. Gasket, Edelbrock, and more.
MSD Ignition Performance and Racing Products
start at just $13.29 and boast an impressive 4 stars average rating from customers.
Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $17.49, and at an average 4 stars rating.
With 332 customer reviews and counting, our 1985 Oldsmobile Toronado Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Oldsmobile Toronado is always ready to roll. We’re committed to providing you with everything you need to keep your Toronado in top shape, all in one place.
Start shopping confidently below for your 1985 Oldsmobile Toronado!
Best-Selling Performance Steering Products for 1985 Oldsmobile Toronados
Enhance the driving experience in your Oldsmobile with 1 quality Performance Steering Product components, starting at $9.99.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Most Popular 1985 Oldsmobile Toronado Performance Ignition Products
Customize your Oldsmobile with 6 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $186.99.
MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)
from
$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
Product Features:
See More
Product Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
Top Picks for 1985 Oldsmobile Toronado Performance Fuel Systems
Upgrade Oldsmobile Toronados with top-quality Performance Fuel Systems parts, including 8 OEM and aftermarket selections for your 1985 model.
Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)
from
$435.99
The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – CARBURETOR (Part No.14054)
from
$488.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)
from
$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – CARBURETOR (Part No.14064)
from
$541.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Electric Choke Installed from Factory
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)
from
$413.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Aluminum Body Material
- Manual Choke Type
- 800 cfm Maximum Flow Rating
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
In-Demand Performance Distributors for 1985 Oldsmobile Toronados
Select from 9 premium Performance Distributors parts for your 1985 Oldsmobile Toronado, with prices ranging from $10.99 to $647.99.
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.
Product Features:
See More
Product Features:
- PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
- Premium quality wire harness and capacitor.
MSD Ignition – Rotor; GM HEI (Part No.8410)
from
$13.29
Replacement rotor for Chevrolet HEI style distributors.
Product Features:
See More
Product Features:
- For HEI distributors
- Resist carbon tracking
- Low resistance brass
- Max voltage transfer
- Molded from insulated material
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)
from
$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Most Sold 1985 Oldsmobile Toronado Performance Engines
Explore our best-selling Oldsmobile parts for the 1985 Toronado among 7 OEM and aftermarket options starting from $26.99.
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)
from
$463.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)
from
$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)
from
$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)
from
$324.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Top-Rated Performance and Racing Products Brands For Your 1985 Oldsmobile Toronado
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Oldsmobile Toronados. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1985 Toronado start at just $13.29 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular MSD Ignition 1985 Oldsmobile Toronado Performance and Racing Products
When it comes to maintaining or upgrading your 1985 Oldsmobile Toronado, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1985 Oldsmobile Toronado. With over 6 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $157.21. Plus, with over 51 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Mr. Gasket 1985 Oldsmobile Toronado Performance and Racing Products
Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Oldsmobile Toronado owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1985 Toronado, Advance Auto Parts carries a full inventory of 4 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $98.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1985 Oldsmobile Toronado Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1985 Oldsmobile Toronados?
Out of 51 Performance and Racing Products that fit 1985 Oldsmobile Toronados, the following parts are the top sellers:
- Distributor Cap and Rotor; GM HEI Distributor; Red (6900012) – $46.49
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
- Oil Pan Bolt Kit (17360377) – $17.49
What’s the price range for 1985 Oldsmobile Toronado Performance and Racing Products?
Performance and Racing Product prices for the 1985 Oldsmobile Toronado start at $9.99 and go up to $1,138.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1985 Oldsmobile Toronado?
The average price for Performance and Racing Products for the 1985 Oldsmobile Toronado is $362.00. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Toronado model years?
What are the cheapest Performance and Racing Products for my 1985 Oldsmobile Toronado?
The cheapest 1985 Oldsmobile Toronado Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $9.99
- D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $10.99
- Rotor; GM HEI (17350190) – $13.29
- D4061 Flame-Thrower HEI Distributor Rotor Red (10111583) – $15.99
- D4062 Flame-Thrower HEI Distributor Rotor Blue (10111488) – $15.99
What types of Performance and Racing Products do you sell for my 1985 Oldsmobile Toronado?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1985 Oldsmobile Toronado:
Can I get help with 1985 Oldsmobile Toronado Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.
What is your return policy for Oldsmobile Toronado Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Oldsmobile Toronado Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
