1985 Oldsmobile Cutlass Salon Performance and Racing Products

Essential Performance and Racing Products for 1985 Oldsmobile Cutlass Salons

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Distributor Cap; GM HEI; Red

from

$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:
  • Stock GM HEI replacement distributor cap
  • Red
See More

Lakewood – Drag Shock-70/30:GM (Rear) (Part No.40310)

Drag Shock-70/30:GM (Rear)

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1356)

Lower Intake Manifold Gasket Set: 4 Piece Set

from

$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Differential Cover Kit (Part No.9896)

Differential Cover Kit

from

$64.99
The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

Product Features:
  • Chrome plated steel for looks
  • Includes bolts and gasket
See More

Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

from

$322.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Satin Finish
  • Non-EGR W/ Oil Fill Tube
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

MSD Ignition – Rotor; GM HEI (Part No.8410)

Rotor; GM HEI

from

$13.29
Replacement rotor for Chevrolet HEI style distributors.

Product Features:
  • For HEI distributors
  • Resist carbon tracking
  • Low resistance brass
  • Max voltage transfer
  • Molded from insulated material
See More

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

High Energy Ignition Coil for GM HEI - 1973-1991

from

$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-31
  • MSD 8225
See More

MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

Distributor; Oldsmobile V8; Ready-to-Run

from

$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

Mr. Gasket – Water Neck (Part No.9714)

Water Neck

from

$35.49
Precision die-cast for a great fit, these water necks are first polished to a high luster, then beautifully chrome plated for lasting beauty. Comes with gasket and mounting bolts.

Product Features:
  • Prevents Water Leaks
  • Precision Die Cast
See More

Energy Suspension – Hyper-Flex System (Part No.3.18110G)

Hyper-Flex System

from

$342.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Mr. Gasket – Distributor Hold-Down Clamp (Part No.1009)

Distributor Hold-Down Clamp

from

$9.99
Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

Coil Spring Isolator Set

from

$12.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G875342X)

Performance Differential Ring and Pinion

from

$236.99


Product Features:
  • GM 10BL 7.5 &7.625 R/P 3.42X* MGP
See More

Hurst – Manual Shifter, Super Street (Part No.3917535)

Manual Shifter, Super Street

from

$499.99
The industry standard for over 30 years, this shifter offers state of the art transmission control for popular manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles.

Product Features:
  • 7.5 in. Tall Chrome Plated Stick
  • High Mounting Design
  • Heat Treated Components
  • Adjustable Gear Stops
  • Complete With Hardware
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

Ball Joint Dust Boot Set

from

$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Edelbrock – Performer RPM Carb/Plate Nitrous Systems 4500 Series Carbs (100-150-250 Hp) (Part No.70053)

Performer RPM Carb/Plate Nitrous Systems 4500 Series Carbs (100-150-250 Hp)

from

$757.99


Product Features:
  • Designed For Carbureted V8 Engines
  • Simple To Install
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3156R)

Control Arm Bushing Set

from

$111.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

Copper Seal; Exhaust Gasket Set

from

$59.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:
  • Will Not Shrink/Deteriorate
  • Creates A Tight Leak Proof Seal
  • Helps Lower Under hood Temps
  • Seals Irregular Surfaces
  • Seals Slightly Damaged Surface
  • Ideal For Tow Vehicles
  • Ideal For Motor Homes
See More

Lakewood – Drag Shock-70/30:GM (Part No.40120)

Drag Shock-70/30:GM

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$494.99
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum (Part No.4144)

Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum

from

$391.99
The Edelbrock #4144 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Small Block Chevy 262-400 1959-86
  • Tall
  • Polished Aluminum
  • Set Of Two
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70090)

    Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp)

    from

    $875.99


    Product Features:
    • Designed For Carbureted V8s
    • Power Increases From 100-250 HP
    • Precision EDM Machined Spray Bars
    • Simple To Install
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Upgrade your 1985 Oldsmobile Cutlass Salon with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1985 Oldsmobile Cutlass Salon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Cutlass Salon functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Performance and Racing Products for the 1985 Oldsmobile Cutlass Salon, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Oldsmobile Cutlass Salon at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,138.99, with an average price of $295.76. Our 98 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1985 Oldsmobile Cutlass Salon without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Oldsmobile Cutlass Salon, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, Mr. Gasket, Edelbrock, and more. MSD Ignition Performance and Racing Products start at just $13.29 and boast an impressive 4 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $17.49, and at an average 4 stars rating. With 697 customer reviews and counting, our 1985 Oldsmobile Cutlass Salon Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Oldsmobile Cutlass Salon is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Salon in top shape, all in one place. Start shopping confidently below for your 1985 Oldsmobile Cutlass Salon!

    Best-Selling Performance Exhaust Products for 1985 Oldsmobile Cutlass Salons

    Enhance the driving experience in your Oldsmobile with 7 quality Performance Exhaust Product components, starting at $33.49.

    Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $113.99
    Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $99.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $139.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $175.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Dynomax – 89017 Exhaust System Kit (Part No.89017)

    89017 Exhaust System Kit

    from

    $259.99
    Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.

    Product Features:
    • COMPATIBILITY — Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine spec
    • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
    • FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
    • IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
    • SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
    • COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
    • PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
    • BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
    • WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

    Exhaust Manifold Gasket Set

    from

    $33.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Most Popular 1985 Oldsmobile Cutlass Salon Performance Distributors

    Customize your Oldsmobile with 9 Performance Distributors products like Performance Distributor Cap and Rotor Kits, Performance Distributor Components, and Performance Distributors, all priced under $647.99.

    PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

    D9001 Flame-Thrower HEI Distributor Advance Curve Kit

    from

    $26.99
    Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

    Product Features:
    • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
    • Precision machined chromoly weights and center plate.
    See More

    MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

    Distributor Cap; GM HEI; Red

    from

    $49.49
    The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

    Product Features:
    • Stock GM HEI replacement distributor cap
    • Red
    See More

    MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

    Distributor Cap and Rotor; GM HEI Distributor; Red

    from

    $46.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    • Performance replacement part
    See More

    PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

    D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

    from

    $30.99
    Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

    Product Features:
    • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
    • Premium quality wire harness and capacitor.
    See More

    MSD Ignition – Rotor; GM HEI (Part No.8410)

    Rotor; GM HEI

    from

    $13.29
    Replacement rotor for Chevrolet HEI style distributors.

    Product Features:
    • For HEI distributors
    • Resist carbon tracking
    • Low resistance brass
    • Max voltage transfer
    • Molded from insulated material
    See More

    PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

    D4061 Flame-Thrower HEI Distributor Rotor Red

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

    Distributor; Oldsmobile V8; Ready-to-Run

    from

    $647.99
    Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

    Product Features:
    • Simple and clean three wire installation
    • CARB E.O. Approved
    • Does not require an MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    See More

    PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

    D4062 Flame-Thrower HEI Distributor Rotor Blue

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

    D4260 Flame-Thrower Distributor Rotor HEI/EST Black

    from

    $10.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    Top Picks for 1985 Oldsmobile Cutlass Salon Performance Ignition Products

    Upgrade Oldsmobile Cutlass Salons with top-quality Performance Ignition Products parts, including 7 OEM and aftermarket selections for your 1985 model.

    Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

    High Energy Ignition Coil for GM HEI - 1973-1991

    from

    $100.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
    See More

    MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

    High Energy Ignition Coil for GM HEI Distributors

    from

    $112.99
    HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    Product Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – GM Hei Supercoil Red/White (Part No.140005)

    GM Hei Supercoil Red/White

    from

    $113.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Similar to Standard Motor Products SMP Dr-32
    • Long Life And Great Looks
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More

    In-Demand Performance Engines for 1985 Oldsmobile Cutlass Salons

    Select from 12 premium Performance Engines parts for your 1985 Oldsmobile Cutlass Salon, with prices ranging from $18.29 to $665.99.

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)

    Performer Small-Block Oldsmobile 350 EGR Intake Manifold

    from

    $463.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)

    PERFORMANCE OIL PAN GASKET SET

    from

    $18.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Spectre – Water Neck; Olds (Part No.4733)

    Water Neck; Olds

    from

    $26.99
    Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

    Product Features:
    • Fits Oldsmobile 330, 350, 425 and 455 engines
    • Chrome plated
    • Bolts included
    • Designed for OEM fit
    • Easy to install
    • O-ring/gasket not included
    See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

    Lower Intake Manifold Gasket Set: 3 Piece Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

    Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire

    from

    $367.99


    Product Features:
    • Designed for Optimum Torque and Acceleration
    • Maximum Performance From Idle through Mid-Range
    • Matched To Performer Intake PN[5486]
    • Includes Hydraulic Lifters and Assembly Lube
    • Major Improvement in Throttle Response and Torque
    • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
    • Take The Guesswork Out Of Camshaft Selection
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1000)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $59.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Buick 3.8L, 4.1L V6 Intake Manifold (Part No.5486)

    Performer Buick 3.8L, 4.1L V6 Intake Manifold

    from

    $381.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Not for C-3 and C-4 Electronic Fuel Mngmt Systems
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

    Xtreme Energy 218/224 Hydraulic Flat Cam

    from

    $548.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)

    Xtreme Energy 224/230 Hydraulic Flat Cam

    from

    $337.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)

    Thumpr 226/241 Hydraulic Flat Cam

    from

    $324.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Most Sold 1985 Oldsmobile Cutlass Salon Performance Fuel Systems

    Explore our best-selling Oldsmobile parts for the 1985 Cutlass Salon among 8 OEM and aftermarket options starting from $394.99.

    Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

    Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $435.99
    The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – CARBURETOR (Part No.14054)

    CARBURETOR

    from

    $488.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Can Add Electric Choke PN[1478]
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

    Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $428.99
    The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $394.99
    The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $451.99
    The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – CARBURETOR (Part No.14064)

    CARBURETOR

    from

    $541.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Electric Choke Installed from Factory
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

    Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $413.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Aluminum Body Material
    • Manual Choke Type
    • 800 cfm Maximum Flow Rating
    See More

    Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

    Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $407.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 750 cfm Maximum Flow Rating
    See More

    Top-Rated Performance and Racing Products Brands For Your 1985 Oldsmobile Cutlass Salon

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Oldsmobile Cutlass Salons. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1985 Cutlass Salon start at just $13.29 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular MSD Ignition 1985 Oldsmobile Cutlass Salon Performance and Racing Products

    When it comes to maintaining or upgrading your 1985 Oldsmobile Cutlass Salon, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1985 Oldsmobile Cutlass Salon. With over 6 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $157.21. Plus, with over 51 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Mod HEI Dust Cover, V8 & Odd Fire V6
    from
    $72.99
    This product is not rated

    Mod HEI Dust Cover, V8 & Odd Fire V6

    “”

    Distributor; Oldsmobile V8; Ready-to-Run
    from
    $647.99
    This product is not rated

    Distributor; Oldsmobile V8; Ready-to-Run

    “”

    Rotor; GM HEI
    from
    $13.29
    This product is not rated

    Rotor; GM HEI

    “”

    Popular Mr. Gasket 1985 Oldsmobile Cutlass Salon Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Oldsmobile Cutlass Salon owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1985 Cutlass Salon, Advance Auto Parts carries a full inventory of 4 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $98.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Oil Pan Bolt Kit
    from
    $17.49
    This product is not rated

    Oil Pan Bolt Kit

    “”

    Differential Cover Kit
    from
    $64.99
    This product is not rated

    Differential Cover Kit

    “”

    Valve Cover
    from
    $98.99
    This product is not rated

    Valve Cover

    “”

    FAQs for 1985 Oldsmobile Cutlass Salon Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1985 Oldsmobile Cutlass Salons?

    Out of 98 Performance and Racing Products that fit 1985 Oldsmobile Cutlass Salons, the following parts are the top sellers:

    What’s the price range for 1985 Oldsmobile Cutlass Salon Performance and Racing Products?

    Performance and Racing Product prices for the 1985 Oldsmobile Cutlass Salon start at $9.99 and go up to $1,138.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1985 Oldsmobile Cutlass Salon?

    The average price for Performance and Racing Products for the 1985 Oldsmobile Cutlass Salon is $295.76. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Cutlass Salon model years?

    Yes, we currently carry Performance and Racing Products for 8 model years of Oldsmobile Cutlass Salons between 1975 and 1987. Performance and Racing Products are bought most frequently for the following model years: 1987, 1986, 1980, 1979, 1978, 1977, 1976, and 1975.

    What are the cheapest Performance and Racing Products for my 1985 Oldsmobile Cutlass Salon?

    The cheapest 1985 Oldsmobile Cutlass Salon Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1985 Oldsmobile Cutlass Salon?

    Out of 697 reviews by customers, our 1985 Oldsmobile Cutlass Salon Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 Oldsmobile Cutlass Salon and their top-rated products:

    Can I get help with 1985 Oldsmobile Cutlass Salon Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.

    What is your return policy for Oldsmobile Cutlass Salon Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Salon Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.