1985 Lincoln Continental Suspension Parts

Essential 1985 Lincoln Continental Suspension Parts

Dorman – Air Suspension Line Repair Union, 90 Degree And Straight Connector: OE Fix (Part No.949-210)

Air Suspension Line Repair Union, 90 Degree And Straight Connector: OE Fix

from

$21.99
This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
  • Increased durability – brass construction prevents future failures from original brittle plastic design
  • Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Suncore – SuspAirBag/Bellows (Part No.36F-15-R-PAIR)

SuspAirBag/Bellows

from

$144.99
SuspAirBag/Bellows

Monroe – Max-Air Air Shock Absorber (Part No.MA815)

Max-Air Air Shock Absorber

from

$158.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Dorman – Air Suspension Air Spring, Rear (Part No.949-270)

Air Suspension Air Spring, Rear

from

$127.99
This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
  • Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Air Suspension Compressor Dryer (Part No.949-797)

Air Suspension Compressor Dryer

from

$97.99
This air suspension compression dryer is designed to match the fit and function of the original dryer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this air suspension compression dryer is designed to match the fit and function of the original dryer on specified vehicles
  • Restores functionality – reliable replacement for an original dryer that is leaking, clogged or failed due to damage
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Strut Bellow (Part No.DW-K90462)

Strut Bellow

from

$6.99
Driveworks Shock Mount, Suspension Strut Bellows

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

MOOG – Control Arm Bushing Kit (Part No.K8202)

Control Arm Bushing Kit

from

$28.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Suncore – Air Spring Solenoid (Part No.F-45-2)

Air Spring Solenoid

from

$39.99
At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:
  • Includes O-Rings
  • Lifetime Warranty
See More

Suncore – AirSpSolenoid (Part No.F-45-2-PAIR)

AirSpSolenoid

from

$59.99
AirSpSolenoid

Monroe – Strut-Mate Strut Boot Kit (Part No.63621)

Strut-Mate Strut Boot Kit

from

$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5522)

High Pressure Monotube Gas Shock for Cars and Trucks

from

$65.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Classic Cars
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55803)

Gas-Matic Passenger Car Shock Absorber

from

$37.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Suncore – SuspAirSprng (Part No.38F-15-F)

SuspAirSprng

from

$204.99
SuspAirSprng

Suncore – SuspAirBag/Bellows (Part No.38F-15-F-PAIR)

SuspAirBag/Bellows

from

$399.99
SuspAirBag/Bellows

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Dorman – Suspension Air Compressor (Part No.949-207)

Suspension Air Compressor

from

$321.99
This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
  • Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Dorman – Air Suspension Delete Kit, Rear, With Mounts And Hardware (Part No.949-592)

Air Suspension Delete Kit, Rear, With Mounts And Hardware

from

$587.99
Failed air suspension too costly to repair? This partial air-to-coil spring conversion kit replaces failed rear air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.

Product Features:
  • Alternative replacement – this air suspension delete kit replaces the original rear air springs with conventional coil springs
  • Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
  • Thoroughly tested – parts underwent ride handling testing to ensure performance
  • Tech note – includes all necessary hardware and components needed to convert rear suspension; full 4-corner kit required to eliminate warning light
See More

Arnott Air Suspension – Arnott Rear Coil Spring Conversion Kit (Part No.C-2180)

Arnott Rear Coil Spring Conversion Kit

from

$289.99
Arnott’s new coil spring conversion kit was exclusively designed for the Lincoln Continental. This kit converts the rear of the vehicle to a reliable coil spring suspension system.
See More

Dorman – Air Suspension Solenoid, Rear, With Hardware (Part No.949-800)

Air Suspension Solenoid, Rear, With Hardware

from

$33.99
This suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles
  • Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
  • Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Air Suspension Solenoid, With Hardware (Part No.949-798)

Air Suspension Solenoid, With Hardware

from

$40.99
This suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles
  • Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
  • Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone – Active Suspension Control Module (Part No.73-41000)

Active Suspension Control Module

from

$192.99
CARDONE Remanufactured Suspension Control Modules are engineered for quick installation and no comebacks. Each unit is engineered to meet or exceed O.E.M performance. All modules are 100% computerized tested and resolder of critical components, as well as 100% replacement of common ware components, ensuring superior electrical connections.

Product Features:
  • All modules are 100% tested with automated computerized test equipment to ensure functionality and reliable
  • 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

KYB – Gas Strut (Part No.235008)

Gas Strut

from

$83.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Strut
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
  • To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5054
  • Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb103
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5969)

OESpectrum Passenger Car Shock Absorber

from

$53.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)

Monroe Shock Absorber Air Hose Kit

from

$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

1985 Lincoln Continental Suspension Parts

You count on your 1985 Lincoln Continental to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 30 Suspension Parts ranging in price from $6.99 to $522.99, you’re sure to find everything you need for your 1985 Lincoln Continental.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 10 different brands like Monroe, Driveworks, and Moog. 1985 Lincoln Continental Suspension Parts start as low as $6.99!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 80 extensive product reviews on 1985 Lincoln Continental Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut Bellows with 2.2 stars and Max-Air Air Shock Absorber with 3.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1985 Lincoln Continental below to get started!

Top-Rated Suspension Parts Brands For Your 1985 Lincoln Continental

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Lincoln Continental running right for years to come. In our inventory you’ll find brands like Monroe, Driveworks, Moog, and even more.

Popular Driveworks Suspension Parts

You’ll find popular Driveworks brand products across Shocks and Struts. All are waiting to get your 1985 Lincoln Continental back on the road. Some of the top-rated Driveworks products in these categories are:
Strut Bellow
from $6.99
(7)
Strut Bellow
Strut Bellows

FAQs for 1985 Lincoln Continental Suspension Parts

What are the most purchased Suspension Parts for the 1985 Lincoln Continental?

Out of 30 Suspension Parts for the 1985 Lincoln Continental, the most popular in our inventory are:
Jounce Bumper and Bellows
from $31.49
(9)
Jounce Bumper and Bellows
Strut Bellows
OESpectrum Passenger Car Shock Absorber
from $48.99
(3)
OESpectrum Passenger Car Shock Absorber
Rear Shock and Struts
Control Arm Bushing Kit
from $28.99
(1)
Control Arm Bushing Kit
Lower Control Arm Bushings

What are the top-rated 1985 Lincoln Continental Suspension Parts?

Top-rated Suspension Parts for your 1985 Lincoln Continental based on customer reviews/ratings are:
Strut Bellows
from $35.99
(5)
Strut Bellows
“Replaced the stretched front bellows and cracked bushing stops on my 2005 Mini Cooper S. Didn’t plan to replace them, but when I got the front struts ”
Max-Air Air Shock Absorber
from $158.99
(2)
Max-Air Air Shock Absorber
“Getting the new shocks in was easy, getting the old ones out not so. The piston rod of both the factory shocks would just spin not allowing the locknu”
Strut-Mate Strut Boot Kit
from $27.99
(1)
Strut-Mate Strut Boot Kit
“…direct replacement for factory installed shock/strut boot…good protection for any application…”