1985 Jeep J10 Steering and Chassis Parts

Essential 1985 Jeep J10 Steering and Chassis Parts

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J4486141)

OE Replacement

from

$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

TRW – Tie Rod End Adjustin (Part No.M3012363506TRW)

Tie Rod End Adjustin

from

$31.45
Tie Rod End Adjustin

Cardone – Power Steering Pump (Part No.20-140)

Power Steering Pump

from

$87.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Monroe – Magnum Steering Damper (Part No.SC2911)

Magnum Steering Damper

from

$51.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Stabilizer Bar Link Bushing Kit (Part No.K90027)

Stabilizer Bar Link Bushing Kit

from

$12.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Monroe – Magnum Steering Damper (Part No.SC2940)

Magnum Steering Damper

from

$48.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Tie Rod End (Part No.ES452L)

Tie Rod End

from

$63.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Driveworks – Suspension Ball Joint (Part No.DW-K8194THD)

Suspension Ball Joint

from

$22.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$10.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Multi Purpose Seal (Part No.480821)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Lares – Remanufactured Power Steering Gear Box (Part No.970)

Remanufactured Power Steering Gear Box

from

$397.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)

Steering Gear Complete Rebuild Kit

from

$116.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Crown Auto Jeep Replacmnt – OE Replacement, Steel (Part No.J3200501)

OE Replacement, Steel

from

$4.49
Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

MOOG – Drag Link (Part No.ES453L)

Drag Link

from

$73.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES362S)

Tie Rod End Adjusting Sleeve

from

$33.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Alloy steel construction provides durability
  • Includes any necessary hardware
See More

Carquest Premium – Return Hose Assembly (Part No.35287)

Return Hose Assembly

from

$27.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$26.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)

Steering Gear Input Shaft Seal Kit

from

$9.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Ball Joint (Part No.410-65013)

Ball Joint

from

$59.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Knurling improves retention between the control arm/knuckle and ball joint housing
  • Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
See More

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J8132676)

OE Replacement

from

$12.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Carquest Premium – Pressure Hose Assembly (Part No.35702)

Pressure Hose Assembly

from

$70.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

National – Multi Purpose Seal (Part No.313842)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.4487696K)

OE Replacement

from

$49.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J4486140)

OE Replacement

from

$8.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

MOOG – Caster/Camber Shim (Part No.K974-7)

Caster/Camber Shim

from

$28.49
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

1985 Jeep J10 Steering and Chassis Parts

You count on your 1985 Jeep J10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 66 Steering and Chassis Parts ranging in price from $2.49 to $709.99, you’re sure to find everything you need for your 1985 Jeep J10.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Imperial, Carquest Premium, and Cardone. 1985 Jeep J10 Steering and Chassis Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 771 extensive product reviews on 1985 Jeep J10 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Pump with 3.1 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1985 Jeep J10 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1985 Jeep J10

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Jeep J10 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular Monroe Steering and Chassis Parts

You’ll find popular Monroe brand products across Steering Dampers. All are waiting to get your 1985 Jeep J10 back on the road. Some of the top-rated Monroe products in these categories are:
Magnum Steering Damper
from $48.99
(1)
Magnum Steering Damper
Steering Dampers

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1985 Jeep J10, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Coolers
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Quick Connect Coupler
from $11.49
(3)
Quick Connect Coupler
Power Steering Coolers

FAQs for 1985 Jeep J10 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1985 Jeep J10?

Out of 66 Steering and Chassis Parts for the 1985 Jeep J10, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.49
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Reservoir Hoses

What are the top-rated 1985 Jeep J10 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1985 Jeep J10 based on customer reviews/ratings are:
Power Steering Pump
from $70.99
(24)
Power Steering Pump
“Perfect fit and good quality”
Bulk - 3/8" I.D. Return Hose J189
from $47.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
BALL JOINT 1 EA DRIVE
from $35.99
(16)
BALL JOINT 1 EA DRIVE
“This product is great.”