1985 Jeep Grand Wagoneer Wheel Bearings
More 1985 Jeep Grand Wagoneer Wheel Bearings
Find your specific 1985 Jeep Grand Wagoneer original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Jeep Grand Wagoneer Wheel Bearings
Carquest Premium – Hub Assembly with Wheel Bearing 91-45439 (Part No.91-45439)
from
$132.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J3156052)
from
$26.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.513084)
from
$147.99
Product Features:
See More
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Wheel Hub Assembly (Part No.NT513084)
from
$92.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
National – Bearings (Part No.LM104949)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cone (Part No.S-LM-104949)
from
$11.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.25590)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.25821)
from
$11.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
NTN – BCA Wheel Bearing (Part No.K80001620695NTN)
from
$26.54
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials & design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads & longer life.
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-A-10)
from
$19.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)
from
$13.79
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A-10)
from
$32.49
Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Crown Auto Jeep Replacmnt – For Use With Dana 35 Rear Axle Or 44 Rear Axle (Part No.83503064)
from
$64.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Engraved Caps (Part No.29080)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange, 30 Spline Inner, 48 Spline Outer (Part No.29075)
from
$129.99
Drive flange, 30 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 30 spline
- One single flange
Yukon Gear – Drive Flange, 19 Spline Inner, 48 Spline Outer (Part No.29078)
from
$129.99
Drive flange, 19 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 19 spline
- One single flange
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Engraved Caps (Part No.29065)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Non-Engraved Caps (Part No.29066)
from
$436.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Non-engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Non-Engraved Caps (Part No.29079)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Popular 1985 Jeep Grand Wagoneer Wheel Bearings Categories
1985 Jeep Grand Wagoneer Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 1985 Jeep Grand Wagoneer. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 16 different Wheel Bearings in our inventory ranging from $11.99 to $436.99. That means you can find the exact parts or products you need to keep that 1985 Jeep Grand Wagoneer running smoothly.
Wheel Bearings are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Jeep Grand Wagoneer. Driveworks, National, and Crown Auto Jeep Replacmnt are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 1985 Jeep Grand Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Wheel Bearings to keep your 1985 Jeep Grand Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 1985 Jeep Grand Wagoneer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Jeep Grand Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Wagoneer the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular National Wheel Bearings
We carry National parts in our stock across Front Wheel Bearings categories, plus more. For a 1985 Jeep Grand Wagoneer, our most popular National Wheel Bearings include:
Top 1985 Jeep Grand Wagoneer Wheel Bearings from Driveworks
Driveworks products are another trusted brand when it comes to Wheel Bearings for your 1985 Jeep Grand Wagoneer. Popular Driveworks parts include:
FAQs for 1985 Jeep Grand Wagoneer Wheel Bearings
What are the most purchased Wheel Bearings for the 1985 Jeep Grand Wagoneer?
Out of 16 Wheel Bearings for the 1985 Jeep Grand Wagoneer, the most popular in our inventory are:
from
$64.99
This product is not rated
For Use With Dana 35 Rear Axle Or 44 Rear Axle
Rear Wheel Bearings
