1985 Jaguar XJ6 Fuel and Emissions Systems
More 1985 Jaguar XJ6 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1985 Jaguar XJ6, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1985 Jaguar XJ6 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Original Equipment – Fuel Tank Sender Ass (Part No.E200542657OEA)
from
$99.21
Fuel Tank Sender Ass
Eurospare – Fuel Tank Sender Ass (Part No.E2005240582ESP)
from
$109.33
Fuel Tank Sender Ass
Rein – Hose Clamp (Part No.Y3063860432RIN)
from
$3.57
Hose Clamp
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Delphi – Electric Fuel Pump: With Extra Fitting, Splices, Terminal Hardware, Wires (Part No.FE0071)
from
$59.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)
from
$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2285)
from
$40.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1019)
from
$65.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Delphi – Fuel Injection Pressure Regulator (Part No.FP10559)
from
$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)
from
$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
NTK – Switching Oxygen Sensor: 1 Wire, 19" Long, Non-Heated, Direct Fit (Part No.23044)
from
$36.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Oxygen Sensor (Part No.C501037489BOS)
from
$110.54
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
NTK – NTK Oxygen Sensor (Part No.C501062963NTK)
from
$53.51
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
Cardone – Mass Air Flow Sensor (Part No.74-10253)
from
$325.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Product Features:
See More
Product Features:
- 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
- On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
- All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
- Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
- Components are rated to handle demanding temperature variations for optimum reliability in every environment.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Mass Air Flow Sensor (Part No.74-20100)
from
$122.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Product Features:
See More
Product Features:
- 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
- On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
- All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
- Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
- Components are rated to handle demanding temperature variations for optimum reliability in every environment.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Elring – Cold Start Valve Gasket (Part No.C400155249ELR)
from
$2.76
Cold Start Valve Gasket
CRP – Fuel Injector Seal (Part No.C101019205CRP)
from
$2.47
Fuel Injector Seal
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)
from
$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Original Equipment – Fuel Float Level (Part No.E203543448OEA)
from
$17.45
The Original Equipment Fuel Float Level is an OE-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OE-recommended replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OE
- Manufactured to OE specification for fit, form, and function
Dorman – Fuel Tank With Lock Ring And Seal (Part No.575-026)
from
$637.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Dorman – Fuel Tank With Lock Ring And Seal (Part No.575-031)
from
$637.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Dorman – Fuel Tank With Lock Ring And Seal (Part No.575-053)
from
$637.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Dorman – Fuel Tank With Lock Ring And Seal (Part No.575-052)
from
$637.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Spectra Premium – Fuel Tank (Part No.JA1E)
from
$372.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Popular 1985 Jaguar XJ6 Fuel and Emissions Systems Categories
1985 Jaguar XJ6 Fuel and Emissions Systems
You count on your 1985 Jaguar XJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 27 Fuel and Emissions Systems ranging in price from $2.47 to $637.99, you’re sure to find everything you need for your 1985 Jaguar XJ6.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Delphi, Bosch, and Original Equipment. 1985 Jaguar XJ6 Fuel and Emissions Systems start as low as $2.47!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 37 extensive product reviews on 1985 Jaguar XJ6 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit with 4.5 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1985 Jaguar XJ6 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1985 Jaguar XJ6
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Jaguar XJ6 running right for years to come. In our inventory you’ll find brands like Delphi, Bosch, Original Equipment, and even more.
Popular Bosch Fuel and Emissions Systems
You’ll find popular Bosch brand products across Oxygen Sensors. All are waiting to get your 1985 Jaguar XJ6 back on the road. Some of the top-rated Bosch products in these categories are:
FAQs for 1985 Jaguar XJ6 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1985 Jaguar XJ6?
Out of 27 Fuel and Emissions Systems for the 1985 Jaguar XJ6, the most popular in our inventory are:
from
$39.99
This product is not rated
Oxygen Sensor: 1 Wire, 8.35" Long, Non-heated, Exact Fit
Oxygen Sensors
What are the top-rated 1985 Jaguar XJ6 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1985 Jaguar XJ6 based on customer reviews/ratings are:
from
$49.99
(2)
Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit
“Nice and easy, better than the oem by far.”
