1985 Honda Accord Engine Parts
More 1985 Honda Accord Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1985 Honda Accord, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1985 Honda Accord Engine Parts
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9233 PT)
from
$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Requires no retorquing of the head bolts
- Unsurpassed quality you can trust
- Unsurpassed quality you can trust
Dayco – Premium Timing Belt, 42.01 Inch With 112 Round Tooth (Part No.95244)
from
$48.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round tooth profile; designed to fit the timing sprockets precisely
Spectra Premium – Engine Oil Pan (Part No.HOP28A)
from
$179.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Driveworks – Crankshaft Seal (Part No.S-228008)
Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)
Anchor – Engine Mount: Front, 1 Piece (Part No.8801)
from
$26.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 98-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1998-2002
- Weight approx: 2 Lbs
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 70283-2)
from
$32.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50365 R)
from
$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Ishino – Oil Filler Cap Gasket (Part No.A6150177513ISH)
from
$1.89
Oil Filler Cap Gasket
Ishino – Oil Pump Gasket (Part No.A623050422ISH)
from
$7.67
Oil Pump Gasket
Carquest Premium – Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)
from
$9.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Ishino – Stone Valve Cover Seal Washer (Part No.A8033496053ISH)
from
$2.09
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets and seals since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
Ishino – Stone Cylinder Head Gasket Set (Part No.A8010102728ISH)
from
$102.66
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
- Most gasket sets include components needed for a complete overhaul
AISIN – Timing Belt Kit With Water Pump (Part No.A5001390130ASC)
from
$208.83
The AISIN Timing Belt Kit With Water Pump contains the timing belt, tensioner and deflection pulleys as well as a AISIN water pump. All AISIN components meet the strict original equipment requirements.
Product Features:
See More
Product Features:
- Original equipment quality
- Enhanced reliability for engine and vehicle owner
- Individual parts need not be ordered
- AISIN Hydraulic Tensioner in select applications
- AISIN Water Pump with gaskets. Water Pump with housing in select applications
- OE matched Idler Bearing, and Tensioner Bearing (Koyo and NSK brands)
- OE matched Timing Belt supplied by Mitsuboshi
National – Multi Purpose Seal (Part No.228008)
from
$27.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Felpro – Oil Pan Gasket Set (Part No.OS 30632 T)
from
$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
- OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
- ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
Cardone – Engine Control Module (Part No.72-2176)
from
$456.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Beck/Arnley – Camshaft Seal (Part No.052-2755)
from
$5.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-1825CP)
from
$45.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Corteco – Crankshaft Seal (Part No.A80601334729CFW)
from
$14.16
Crankshaft Seal
Ishino – Stone Distributor O-Ring (Part No.F210140292ISH)
from
$4.26
The Ishino Stone Distributor O-Ring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Dokuro – DOKURO Exhaust Valve (Part No.A4050121619DKO)
from
$24.43
DOKURO use high quality materials and manufacture all engine valves in Japan. Then, as proof of high quality, DOKURO forge Made in Japan is on all valves. The materials available for DOKURO valve applications include carbon steel alloys, stainless steels, inconel, and titanium. Steel alloys such as SUH 3 or SUH 11 are used in most intake valves due to their strength, operating temperatures, relatively low cost, and the fact that they can be hardened at the valve tip for durability. Exhaust valves are made of SUH 35 stainless steel which offers greater high temperature strength and corrosion resistance.
Product Features:
See More
Product Features:
- OE Quality – Made in Japan
- High quality carbon and stainless steel alloys
- High temperature strength
- Corrosion resistance
Dokuro – DOKURO Intake Valve (Part No.A406017453DKO)
from
$3.59
DOKURO use high quality materials and manufacture all engine valves in Japan. Then, as proof of high quality, DOKURO forge Made in Japan is on all valves. The materials available for DOKURO valve applications include carbon steel alloys, stainless steels, inconel, and titanium. Steel alloys such as SUH 3 or SUH 11 are used in most intake valves due to their strength, operating temperatures, relatively low cost, and the fact that they can be hardened at the valve tip for durability. Exhaust valves are made of SUH 35 stainless steel which offers greater high temperature strength and corrosion resistance.
Product Features:
See More
Product Features:
- OE Quality – Made in Japan
- High quality carbon and stainless steel alloys
- High temperature strength
- Corrosion resistance
Melling – Stock Replacement OE Type Oil Pump (Part No.M150)
from
$119.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement OE Type Oil Pump and Screen (Part No.M-96F)
from
$326.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Melling – Stock Replacement OE Type Oil Pump and Screen (Part No.M-96C)
from
$59.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Popular 1985 Honda Accord Engine Parts Categories
1985 Honda Accord Engine Parts
You count on your 1985 Honda Accord to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 36 Engine Parts ranging in price from $1.89 to $454.99, you’re sure to find everything you need for your 1985 Honda Accord.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 18 different brands like Felpro, Carquest Premium, and National. 1985 Honda Accord Engine Parts start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 174 extensive product reviews on 1985 Honda Accord Engine Parts. Some of the top-rated Engine Parts products we carry are Shaft Repair Sleeve with 2.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1985 Honda Accord below to get started!
Top-Rated Engine Parts Brands For Your 1985 Honda Accord
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Honda Accord running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, National, and even more.
Popular Imperial Engine Parts
You’ll find popular Imperial brand products across Oil Cooler Parts. All are waiting to get your 1985 Honda Accord back on the road. Some of the top-rated Imperial products in these categories are:
Top-Rated Engine Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Engine Parts for your 1985 Honda Accord, and some of our most reviewed parts include:
from
$9.99
(26)
Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
FAQs for 1985 Honda Accord Engine Parts
What are the most purchased Engine Parts for the 1985 Honda Accord?
Out of 36 Engine Parts for the 1985 Honda Accord, the most popular in our inventory are:
What are the top-rated 1985 Honda Accord Engine Parts?
Top-rated Engine Parts for your 1985 Honda Accord based on customer reviews/ratings are:
