1985 GMC Safari Exhaust Parts
More 1985 GMC Safari Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1985 GMC Safari, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1985 GMC Safari Exhaust Parts
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18113)
from
$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21391)
from
$142.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Felpro – Exhaust Pipe Flange Gasket (Part No.60556)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60592)
from
$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Tail Pipe Aluminized 39" (Part No.44865)
from
$29.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 37.375" (Part No.44471)
from
$57.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 43.75" (Part No.54141)
from
$79.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Dorman – Exhaust Flange Hardware – 4 Bolts And 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
Dorman – Help – Exhaust Stud Kit – 3/8-16 x 2-1/2 In. (Part No.03112)
from
$6.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)
from
$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Bracket Bolt On Length 4.5 (Part No.35358)
from
$10.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- New Walker accessories help to ensure effective exhaust repairs
- Constructed from durable and robust material for long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- Walker supplies all of the accessories you need to do the complete exhaust job
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
AP Exhaust – Exhaust Clamp (Part No.H80202394452APE)
from
$9.28
The AP Exhaust / Exhaust Clamp is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
BRExhaust – Exhaust Clamp (Part No.250-065)
from
$8.29
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Exhaust 35462 Exhaust System Hanger Insulator (Part No.35462)
from
$14.29
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93432)
from
$201.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93432. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1975-1986 Chevrolet C10, 1975-1986 Chevrolet K10, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.3391476)
from
$914.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 3391476. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1988-1993 Chevrolet C1500, 1988-1993 Chevrolet K1500, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83509)
from
$641.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Walker – CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.80942)
from
$1174.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49082)
from
$690.99
MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49082 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2000-2005 Chevrolet Astro and 2000-2005 GMC Safari, this direct-fit catalytic converter also interchanges with OE part 15744810. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Mahle – Exh. Manifold Gasket (Part No.A8112323250MAH)
from
$20.04
Exh. Manifold Gasket
Felpro – Exhaust Manifold Gasket Set (Part No.MS 93689)
from
$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66078)
from
$48.99
Seal-4-Good Header Flange Gasket
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90746)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90564)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95842)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Popular 1985 GMC Safari Exhaust Parts Categories
1985 GMC Safari Exhaust Parts
You count on your 1985 GMC Safari to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 24 Exhaust Parts ranging in price from $2.49 to $896.99, you’re sure to find everything you need for your 1985 GMC Safari.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 6 different brands like Walker, Dorman, and Felpro. 1985 GMC Safari Exhaust Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 47 extensive product reviews on 1985 GMC Safari Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Bracket Bolt On Length 4.5 with 2.0 stars and CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1985 GMC Safari below to get started!
Top-Rated Exhaust Parts Brands For Your 1985 GMC Safari
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 GMC Safari running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular Flowtech Exhaust Parts
You’ll find popular Flowtech brand products across Exhaust Tips. All are waiting to get your 1985 GMC Safari back on the road. Some of the top-rated Flowtech products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1985 GMC Safari, and some of our most reviewed Walker parts include:
from
$167.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
from
$102.99
(4)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
FAQs for 1985 GMC Safari Exhaust Parts
What are the most purchased Exhaust Parts for the 1985 GMC Safari?
Out of 24 Exhaust Parts for the 1985 GMC Safari, the most popular in our inventory are:
from
$6.29
This product is not rated
Exhaust Stud Kit – 3/8-16 x 2-1/2 In.
Exhaust Hangers and Hardware
What are the top-rated 1985 GMC Safari Exhaust Parts?
Top-rated Exhaust Parts for your 1985 GMC Safari based on customer reviews/ratings are:
from
$10.99
(2)
Bracket Bolt On Length 4.5
“Passing on some lessons learned. If you look at Walker schematic for 1981 – 1985 Astro/Safari vans with 4.3 there are some “gotchas”.
1st is the “y””
from
$871.99
(1)
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
“This catalytic converter will make you car pass every time your car need to pass a smog test in California. My 1995 Jeep Grand Cherokee Laredo has ace”
from
$95.99
(1)
SoundFX Muffler, Direct Replacement, No Fabrication Needed
“Passing on some lessons learned. If you look at Walker schematic for 1981 – 1985 Astro/Safari vans with 4.3 there are some “gotchas”.
1st is the “y””
