1985 GMC K2500 Performance Exhaust Products
More 1985 GMC K2500 Performance Exhaust Products
Find your specific 1985 GMC K2500 original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 GMC K2500 Performance Exhaust Products
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5910)
from
$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5903)
from
$37.69
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5901)
from
$31.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Hooker Headers – Competition Turbo Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Mild Sound (Part No.21005HKR)
from
$63.39
Competition Turbo Mufflers utilized a low back pressure baffle network designed to flow in either direction resulting in better performance and economy.
Product Features:
See More
Product Features:
- Low Backpressure Baffle Network
- Compact Design
- Improved Engine Efficiency
- Better Performance And Economy
- Throaty Sound On Acceleration
- Quiet At Idle And Cruising
- Double Wrapped Aluminized Steel
Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel, 18" L, 3" In, 3" Out, Round (Part No.17698)
from
$115.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)
from
$204.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- Polished finish for a show quality shine
- Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Dual Header Exhaust System Kit for 1973-89 GMC/Chevrolet 4WD Trucks/SUVs (Part No.89004)
from
$134.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax? dual header kit. Designed to attach to headers, it features a special reducer that allows for a variety of mounting options.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for a variety of full-size 1973-89 GMC 4WD trucks and Chevrolet 4WD SUVs; see product information for compatibility and engine spec
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
- FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
- IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
- SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit each side of vehicle behind rear tires
- COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
- PREMIUM MATERIALS — Made from quality aluminized steel for durability and long life
- PREMIUM MATERIALSÿ–ÿMade from quality aluminized steel for durability and long life
- BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
- WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17363)
from
$759.99
DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Hooker Headers – Dual Competition Header Back Exhaust System Kit (Part No.16526HKR)
from
$296.99
Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.
Product Features:
See More
Product Features:
- Reducer Flex-Tubes
- Reduces Backpressure
- Hardware Included
- Instructions Included
Dynomax – Single – 3in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17381)
from
$306.99
DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Dynomax – Dual Header Exhaust System Kit for Classic 4WD Trucks & SUVs (Part No.89003)
from
$209.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax? dual header kit. Designed to attach to OE manifolds, it features a special reducer that allows for a variety of mounting options.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for a variety of full-size 1973-89 GMC 4WD trucks and Chevrolet 4WD SUVs; see product information for compatibility and engine spec
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE manifolds
- FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
- IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
- SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tailpipes exit each side of vehicle behind rear tires
- COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
- PREMIUM MATERIALS — Made from quality aluminized steel for durability and long life
- PREMIUM MATERIALSÿ–ÿMade from quality aluminized steel for durability and long life
- BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
- WARNING — Not legal for use on pollution-controlled motor vehicles
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Spectre – Alternator Bracket (Part No.4719)
from
$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.
Product Features:
See More
Product Features:
- Fits Big Block Chevy engines with a long water pump from 1969 and later
- Manufactured from high quality steel
- Upper bracket for passenger side mounting
- Features a triple chrome-plated finish
- Stock replacement part
Mr. Gasket – Alternator Bracket (Part No.5170)
from
$38.49
Original equipment style bracket in high quality chrome for years of service. Includes hardware.
Product Features:
See More
Product Features:
- Chrome Plated Heavy Gauge Steel
- Can Be Used For Other Applications
- Looks Better Than Painted
- Hardware included
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$19.29
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Chrome plated
- Similar to OEM design
- May be adaptable to other applications
Hooker Headers – LS1 Swap Headers for 66-72 Chevelle, El Camino & More (Part No.2453HKR)
from
$298.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Shorty; Smog Headers (Part No.91831FLT)
from
$315.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Flowtech – Standard Header (Part No.11508FLT)
from
$249.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Shorty; Smog Headers (Part No.91832-1FLT)
from
$399.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Hooker Headers – Truck Force; Emissions Compatible Header (Part No.2021-1HKR)
from
$1117.00
Hooker Truck Force Headers are designed to be a high performance alternative to the stock O.E. manifolds on 2 wheel and 4 wheel drive trucks. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Flowtech – Shorty Smog Headers (Part No.91837FLT)
from
$478.99
Shorty Smog Headers
Flowtech – Ceramic Header (Part No.31506FLT)
from
$499.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Shorty; Smog Headers (Part No.91830FLT)
from
$315.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Popular 1985 GMC K2500 Performance Exhaust Products Categories
1985 GMC K2500 Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1985 GMC K2500. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 18 different Performance Exhaust Products in our inventory ranging from $20.99 to $499.99. That means you can find the exact parts or products you need to keep that 1985 GMC K2500 running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1985 GMC K2500. Mr. Gasket, FEL-PRO Performance, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1985 GMC K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 40 reviews in this category, some of the top rated parts include Dual Competition Header Back Exhaust System Kit with 5.0 stars.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1985 GMC K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1985 GMC K2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 GMC K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowtech Performance Exhaust Products
We carry Flowtech parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1985 GMC K2500, our most popular Flowtech Performance Exhaust Products include:
Top 1985 GMC K2500 Performance Exhaust Products from Mr. Gasket
Mr. Gasket products are another trusted brand when it comes to Performance Exhaust Products for your 1985 GMC K2500. Popular Mr. Gasket parts include:
from
$20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
Performance Exhaust Manifold Gaskets
FAQs for 1985 GMC K2500 Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1985 GMC K2500?
Out of 18 Performance Exhaust Products for the 1985 GMC K2500, the most popular in our inventory are:
What are the top-rated 1985 GMC K2500 Performance Exhaust Products?
Top-rated Performance Exhaust Products for your 1985 GMC K2500 based on customer reviews/ratings are:
from
$296.99
(1)
Dual Competition Header Back Exhaust System Kit
“This exhaust system is about as good as it gets for pre bent systems. The mandrel bends had no kinks and installed very easily. It hooked right up to ”
