1985 GMC K1500 Brake Parts

Essential 1985 GMC K1500 Brake Parts

Carquest Wearever – Brake Drum – Rear (Part No.YH140541)

Brake Drum - Rear

from

$68.99
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:
  • Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • OE based design for OE form, fit, and function
  • Proper harmonic design and balance helps to reduce brake noise
  • Optimal metallurgy and casting thickness to preventing warping
  • Ready for immediate “out-of-the-box” installation (after cleaning)
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-71098)

Vacuum Brake Booster: Without Master Cylinder

from

$159.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

ACDelco – Professional DuraStop Brake Wheel Cylinder (Part No.N2020577939ACD)

Professional DuraStop Brake Wheel Cylinder

from

$21.16
ACDelco Professional DuraStop Brake Wheel Cylinders use both aluminum and iron castings making them the ideal high quality aftermarket replacement for many vehicles on the road today. The ACDelco DuraStop wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Professional Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box – no assembly required. These premium aftermarket replacement Drum Brake Wheel Cylinders are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Pressure tested to ensure safe and confident braking
  • Trivalent coated bleeder screws provide extra protection and added durability
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
See More

Carquest Wearever – Disc Hardware Kit (Part No.5584A)

Disc Hardware Kit

from

$14.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Prevents noise and premature wear
  • Helps deliver a quieter braking system
See More

Carquest Wearever – Brake Hydraulic Banjo Bolt (Part No.H9458)

Brake Hydraulic Banjo Bolt

from

$11.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A Brake Hose Banjo Bolt or Inlet Bolt are perforated hollow bolts that allow brake fluid transfer.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Dorman – Help – Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (Part No.66223)

Brake Hose Washer - Id 10.3mm, Od 16.91mm, Thickness 1.2mm

from

$5.99
This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Brake Rotor (Part No.YH141454)

Brake Rotor

from

$57.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Brake Hold-Down Spring

from

$5.99
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
See More

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2618)

Drum Brake Self-Adjuster Repair Kit

from

$21.99
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the Life Span and Improves the Performance of the Drum Brakes
  • Manufactured with quality materials to suppress high stress levels
  • Eliminates heat and corrosion deterioration
  • Restores brakes to like-new performance
See More

Carquest Premium Gold – Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking (Part No.GMKD369)

Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking

from

$53.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4299)

Semi Loaded Disc Brake Caliper

from

$33.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Dorman – Help – Oversized Brake Caliper Bolts- Trucks- Front-3-5/8 In. (Part No.13895)

Oversized Brake Caliper Bolts- Trucks- Front-3-5/8 In.

from

$25.99
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT1357)

Multi-Purpose Pigtail

from

$37.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Brake Pads (Part No.N1010299788ACD)

GM Original Equipment Brake Pads

from

$145.36
These GM Original Equipment parts replace those installed during the production of a GM vehicle and are designed to be of similarly high quality. ACDelco GM OE Disc Brake Pads provide optimum noise suppression and performance using unique formulations and combined with shims, slots and chamfers where needed. Each disc brake pad backing plate is protected by a premium powder coated finish, ensuring professional protection and appearance.

Product Features:
  • Chamfered, slotted and shimmed to provide similar fit, form and function of the OE service part.
  • Hardware clip kits included (where applicable).
  • Designed to provide optimum performance and durability.
  • Each disc brake pad backing plate is protected by a premium powder coated finish, ensuring professional protection and appearance.
  • Tested to SAE2430 SAE2784 to assure quality.
See More

Dorman – Help – Brake Master Cylinder Cap (Part No.42040)

Brake Master Cylinder Cap

from

$14.99
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
  • Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Brake Anti-Rattle Clip (Part No.5408-2)

Disc Brake Anti-Rattle Clip

from

$4.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Eliminates heat and corrosion deterioration
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41009)

Disc Brake Caliper Repair Kit

from

$4.79
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38665)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Dorman – Help – Brake Bar Lever (Part No.21147)

Brake Bar Lever

from

$10.99
This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Drum Brake C Washer (Part No.1175-2)

Drum Brake C Washer

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to restrain high tolerances with quality materials
See More

Carquest Wearever – New Brake Master Cylinder (Part No.MCA39646)

New Brake Master Cylinder

from

$79.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are “hard anodized”
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
See More

Carquest Wearever – Parking Brake Cable (Part No.BCA95218)

Parking Brake Cable

from

$26.99
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
  • Quality design – inner cables are sheathed and lubricated to provide improved durability
  • Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
  • Tough materials – zinc-plated fittings prevent corrosion
See More

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA351952)

Wheel Cylinder Kit

from

$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K4537)

Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$189.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.5201-2)

Disc Brake Hardware Kit

from

$2.99
Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents noise and premature wear
  • Helps deliver a quieter, more efficient braking system
See More

Dorman – Help – Power Brake Filter (Part No.80195)

Power Brake Filter

from

$11.49
This power brake filter is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this power brake filter is designed to match the fit and function of the original filter on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to clogging
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1985 GMC K1500 Brake Parts

You count on your 1985 GMC K1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 76 Brake Parts ranging in price from $1.99 to $244.99, you’re sure to find everything you need for your 1985 GMC K1500.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 14 different brands like Carquest, Dorman, and Carquest Premium. 1985 GMC K1500 Brake Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,694 extensive product reviews on 1985 GMC K1500 Brake Parts. Some of the top-rated Brake Parts products we carry are Disc Brake Rotor with 4.1 stars and Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1985 GMC K1500 below to get started!

Top-Rated Brake Parts Brands For Your 1985 GMC K1500

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 GMC K1500 running right for years to come. In our inventory you’ll find brands like Carquest, Dorman, Carquest Premium, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 1985 GMC K1500 back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:

Top-Rated Carquest Standard Brake Parts


If Carquest Standard are what you’re looking for, our inventory holds plenty. We stock Carquest Standard brand Brake Parts for your 1985 GMC K1500, and some of our most reviewed Carquest Standard parts include:
Brake Shoes
from $40.99
(140)
Brake Shoes
Rear Brake Pads and Shoes
Brake Pads : Front, Reliable and Dependable Stopping
from $34.99
(54)
Brake Pads : Front, Reliable and Dependable Stopping
Rear Brake Pads and Shoes
Drum Brake Hardware Combi-Kit
from $7.99
(43)
Drum Brake Hardware Combi-Kit
Brake Hardware Kits

FAQs for 1985 GMC K1500 Brake Parts

What are the most purchased Brake Parts for the 1985 GMC K1500?

Out of 76 Brake Parts for the 1985 GMC K1500, the most popular in our inventory are:
WHEEL CYLINDER
from $15.49
(29)
WHEEL CYLINDER
Brake Wheel Cylinders
Brake Hose Bolts M10-1.5 X 22.8mm
from $8.49
(21)
Brake Hose Bolts M10-1.5 X 22.8mm
Brake Hose Bolts
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
from $62.99
(17)
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
Rear Brake Pads and Shoes

What are the top-rated 1985 GMC K1500 Brake Parts?

Top-rated Brake Parts for your 1985 GMC K1500 based on customer reviews/ratings are:
Disc Brake Rotor
from $150.99
(30)
Disc Brake Rotor
“Good quality and price”
Semi Loaded Disc Brake Caliper
from $36.99
(19)
Semi Loaded Disc Brake Caliper
“The calipers fit correct and I had no problems bleeding them no the vehicle.”