1985 Ford Bronco II Drive Shafts and Axles
More 1985 Ford Bronco II Drive Shafts and Axles
Find your specific 1985 Ford Bronco II original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Ford Bronco II Drive Shafts and Axles
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od) (Part No.41045)
from
$319.99
Yukon flange yoke for Ford 7.5″ passenger and truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- 28 spline
- Round companion flange
- 4.3″ O.D.
Yukon Gear – 7.5" C/Clip, Ag Positraction (Part No.33079)
from
$47.99
7.5″ C/clip, AG positraction
Product Features:
See More
Product Features:
- C-clip
- Fits Ford 7.5″ with Auburn Gear positraction
Yukon Gear – Ford 7.5" C/Clip, Tracloc & Standard Open (Part No.33080)
from
$8.99
Ford 7.5″ C/clip, TracLoc & standard Open.
Product Features:
See More
Product Features:
- c-clip for Ford 7.5″
- Fits standard open and Trac Loc applications
- Not compatible with Auburn Gear positraction
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Side Bearing For Cast Iron Corvette, Dana 36 & Dana 28 (Part No.18058)
from
$25.99
Product Features:
See More
- Side axle bearing
- Fits 1963-1979 Corvette, Dana Spicer 28 and 36
Driveworks – Oil Seal (Part No.S-8660S)
from
$5.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Yukon Gear – Dana 28 Right or Dana 36 Left or Right, Replacement Inner Axle Seal (Part No.30036)
from
$44.99
Dana 28 right and Dana 36 left and right, replacement inner axle seal (2.175″ OD).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits Dana 28 right hand and Dana 36 left and right hand
- 2.175″ O.D.
Yukon Gear – Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring (Part No.33269)
from
$4.99
Dana 28 (93^) & Model 35 outer axle/hub snap ring.
Product Features:
See More
Product Features:
- Outer axle snap ring for AMC Model 35 IFS and 1993 and up Dana Spicer 28
Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)
from
$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).
Product Features:
See More
Product Features:
- Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
- Intalls next to side gear
Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)
from
$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Product Features:
See More
Product Features:
- Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
National – Multi Purpose Bearing (Part No.HB-106-FF)
from
$43.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9825)
from
$307.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-091)
from
$375.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9824)
from
$377.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.936-895)
from
$591.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: Greaseable, Adjustable, OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9823)
from
$518.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6062)
from
$40.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1984-1998
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 2.20 INCH / 56 MM
- MOUNT WIDTH: 6.00 INCH / 152 MM
Popular 1985 Ford Bronco II Drive Shafts and Axles Categories
1985 Ford Bronco II Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1985 Ford Bronco II. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 30 different Drive Shafts and Axles in our inventory ranging from $1.99 to $648.99. That means you can find the exact parts or products you need to keep that 1985 Ford Bronco II running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Ford Bronco II. DriveWorks, Spicer, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1985 Ford Bronco II, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 430 reviews in this category, some of the top rated parts include Drive Shaft with 4.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1985 Ford Bronco II rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1985 Ford Bronco II Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Ford Bronco II demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Bronco II the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular National Drive Shafts and Axles
We carry National parts in our stock across Drive Shaft Bearings and Axle Shaft Seals categories, plus more. For a 1985 Ford Bronco II, our most popular National Drive Shafts and Axles include:
Top 1985 Ford Bronco II Drive Shafts and Axles from Driveworks
Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 1985 Ford Bronco II. Popular Driveworks parts include:
FAQs for 1985 Ford Bronco II Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1985 Ford Bronco II?
Out of 30 Drive Shafts and Axles for the 1985 Ford Bronco II, the most popular in our inventory are:
from
$42.99
This product is not rated
R1563Tav Rear Axle Bearing And Seal Kit
Axle Shaft Bearing Assemblies
What are the top-rated 1985 Ford Bronco II Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 1985 Ford Bronco II based on customer reviews/ratings are:
from
$99.99
(1)
Drive Shaft
“Bought this product for a Bronco II. Just make sure of the difference between automatic and manual transmission and 2 and 4 wheel drive to get the pr”
