1985 Ford Bronco II Air Flow Sensors
More 1985 Ford Bronco II Air Flow Sensors
Find your specific 1985 Ford Bronco II original or aftermarket Air Flow Sensors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Ford Bronco II Air Flow Sensors
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1016)
from
$57.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Walker Products – Air Charge Temperature Sensor (Part No.C6000352505WKR)
from
$25.06
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest – Air Charge Temperature Sensor (Part No.31A1018)
from
$20.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better
NTK – Air Charge Temperature Sensor (Part No.EF0016)
from
$30.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1366)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
NTK – Manifold Absolute Pressure Sensor (Part No.MA0119)
from
$61.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
- The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Carquest Premium – New MAP SENSOR (Part No.ECE1196)
from
$56.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Made to OE spec to ensure a proper fit, form and function.
- Sensors are engineered for precision performance, durability and a long service life.
- All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
Motorcraft – MAP Sensor: Essential for Optimal Performance, For Ford and Lincoln Vehicles (Part No.C7044399476MTR)
from
$92.05
Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- New and remanufactured available to help meet your customers’ needs
- Units come ready to plug and play, with no need for modifications
- Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
- Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
- Design includes OE innovations and upgrades
Delphi – Manifold Absolute Pressure Sensor (Part No.PS10242)
from
$70.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.
Product Features:
See More
Product Features:
- Designed and engineered with Delphi expertise
- Internally protected against moisture intrusion and vibration
- Long lasting and durable
- Designed and engineered with Delphi expertise
Popular 1985 Ford Bronco II Air Flow Sensors Categories
1985 Ford Bronco II Air Flow Sensors
Maybe you’re in the middle of a full rebuild of that 1985 Ford Bronco II. Maybe you just need a couple of Air Flow Sensors. Either way, Advance Auto Parts has 7 different Air Flow Sensors in our inventory ranging from $20.99 to $70.99. That means you can find the exact parts or products you need to keep that 1985 Ford Bronco II running smoothly.
Air Flow Sensors are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Ford Bronco II. NTK, Carquest Premium, and Delphi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Air Flow Sensors for your 1985 Ford Bronco II, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Air Flow Sensors to keep your 1985 Ford Bronco II rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Air Flow Sensors Brands To Make Your 1985 Ford Bronco II Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Ford Bronco II demands trusted brand parts and products to keep it running. Many trusted brands of Air Flow Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Bronco II the best it can be. Be sure to browse some of our top Air Flow Sensors brands and parts.
FAQs for 1985 Ford Bronco II Air Flow Sensors
What are the most purchased Air Flow Sensors for the 1985 Ford Bronco II?
Out of 7 Air Flow Sensors for the 1985 Ford Bronco II, the most popular in our inventory are:
from
$61.99
This product is not rated
Manifold Absolute Pressure Sensor
Manifold Air Pressure Sensors
from
$57.99
This product is not rated
Manifold Absolute Pressure Sensor (MAP)
MAP-Barometric Pressures
