1985 Ford Bronco Fuel and Emissions Systems
Find Your Specific 1985 Ford Bronco Fuel and Emissions Systems
Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 1985 Bronco. Advance Auto Parts has popular Bronco parts like Fuel Injectors, Fuel Pumps, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Bronco model years including
1991,
1992,
1993,
1994,
1995,
1996,
2021,
2022,
2023 and more. Select a category of 1985 Ford Bronco Fuel and Emissions Systems below and start saving instantly.
Popular 1985 Ford Bronco Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1985 Ford Broncos
Carquest Premium – Fuel Pump Harness Connector (Part No.PTA1103)
from
$8.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
KAI – Fuel Tank Strap (Part No.TNKST26)
from
$49.99
New Standard Replacement Fuel Tank Strap Kit, 29 1/8 Inch Straps, Pair
Product Features:
See More
Product Features:
- 29 1/8 Inch Straps
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Steel Fuel Tank (Part No.576-159)
from
$179.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Cardone – Remanufactured Smog Air Pump (Part No.32-611)
from
$138.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time.
- High temperature grease extends bearing life, resulting in longer pump life.
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
- Guaranteed fit and function.
- Meets or exceeds O.E.M performance.
Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)
from
$27.99
This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles.
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Diverter Valve (Part No.ECC2322)
from
$239.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Walker Products – Air Charge Temperature Sensor (Part No.C6000352505WKR)
from
$34.11
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1717)
from
$111.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest – Fuel Tank Selector Valve (Part No.FSV3)
from
$84.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Robust designs backed by focused research meet today’s technical needs
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-1242-8PK)
from
$396.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Includes eight premium fuel injectors
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Engine Diagnostic Connector (Part No.PTA1662)
from
$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1073)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Edelbrock – Fuel Injection Fuel Rail #3628, 3/8 in. NPT Clear For Ford Small-Block Windsor (Part No.3628)
from
$219.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3628 Fuel Rail Kit is for use on 1986-1995 5.0L Mustangs with
Product Features:
See More
Product Features:
- Clear Anodized Finish
- High Capacity Fuel Rails
- For Use W/ 1986-1995 5.0L Mustangs W/ A Stock Or Edelbrock Manifold
- 0.375 in. NPT Inlet / Outlet
- Made In The USA
Motorcraft – Fuel Pres. Reg. O-Ri (Part No.C3002374042MTR)
from
$4.75
Fuel Pres. Reg. O-Ri
Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582930)
from
$9.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications.
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Delphi – Manifold Absolute Pressure Sensor (Part No.PS10242)
from
$70.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.
Product Features:
See More
Product Features:
- Designed and engineered with Delphi expertise
- Internally protected against moisture intrusion and vibration
- Long lasting and durable
- Designed and engineered with Delphi expertise
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Position Sensor (Part No.EGC1043)
from
$41.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module. The EGR Valve Position Sensor allows the engine control module to monitor the location and operation of the EGR valve.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)
from
$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1003)
from
$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Oxygen Sensor Connector (Part No.PTA1583)
from
$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Mechanical Fuel Pump 360593: Includes Gasket (Part No.360593)
from
$23.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Dorman – 5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union (Part No.800-054)
from
$26.49
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.
Product Features:
See More
Product Features:
- Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
- Quality construction – manufactured from premium materials for a long service life.
- Saves money – replace only the part, not the entire assembly
- Excellent value – original equipment quality at a lower price
Spectra Premium – Fuel Pump Strainer (Part No.STR02)
from
$3.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium strainers meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Designed with gradient density to meet or exceed OE specifications
- Engineered and developed in Canada
- Designed to ensure optimal filtration to prevent fuel system contamination
- Strainer material tested and validated for capacity and efficiency by accredited, third party
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Engineered and developed by Spectra Premium; proud member of the A.A.S.A. fuel pump manufacturers working group
Carquest Premium – Idle Air Control Valve (Part No.ABC1653)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Upgrade your 1985 Ford Bronco with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1985 Ford Bronco, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Bronco functioning at its best. At Advance Auto Parts, we offer a wide selection of 110 Fuel and Emissions Systems for the 1985 Ford Bronco, designed to meet your needs without breaking the bank.
From
Fuel Injector
replacements to
Fuel Pumps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1985 Ford Bronco at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $1.99 to $396.99, with
an average price of $68.91.
Our 110 Fuel and Emissions Systems in stock come from 21 trusted brands, so you’re sure to find the right part for your 1985 Ford Bronco without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Ford Bronco, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like FELPRO Carquest Premium, and more.
FELPRO Fuel and Emissions Systems
start at just $2.29 and boast an impressive 5 stars average rating from customers.
With 539 customer reviews and counting, our 1985 Ford Bronco Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Ford Bronco is always ready to roll. We’re committed to providing you with everything you need to keep your Bronco in top shape, all in one place.
Start shopping confidently below for your 1985 Ford Bronco!
Best-Selling Fuel Injectors for 1985 Ford Broncos
Enhance the driving experience in your Ford with 20 quality Fuel Injector components, starting at $2.29.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Carburetor Mounting Gasket (Part No.60716)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
MAHLE Original – Gasket (Part No.G31324)
from
$3.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – THROTTLE BODY GASKET SET (Part No.71216)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 93834)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)
from
$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1112)
from
$61.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)
from
$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Motorcraft – Fuel Pres. Reg. O-Ri (Part No.C3002374042MTR)
from
$4.75
Fuel Pres. Reg. O-Ri
Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-1112-8PK)
from
$396.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Includes eight premium fuel injectors
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Delphi – Fuel Injector (Part No.FJ10093)
from
$144.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Wells Vehicle Electronics – Fuel Injector Repair Kit (Part No.2G2116)
from
$55.99
Fuel Injector Repair Kit
Mahle – Mahle, Fuel Injector O-Ring Kit, Pack of 12 (Part No.C1013387693MAH)
from
$14.95
Mahle, Fuel Injector O-Ring Kit, Pack of 12
Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013387693MTR)
from
$10.32
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind
Product Features:
See More
Product Features:
- All parts meet original equipment requirements for fit, finish and durability
- Specifically engineered for Ford and Lincoln vehicles
- Durability tested to meet demanding original equipment service life specifications
- Helps maintain original performance standards
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mahle – Idle Control Valve Gasket (Part No.C4063195530MAH)
from
$4.75
The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Meets or exceeds OEM specifications
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)
from
$3.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Victor Reinz – Fuel Injection Idle Air Control Valve Gasket (Part No.71-13739-00)
from
$2.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Most Popular 1985 Ford Bronco Fuel Pumps
Customize your Ford with 24 Fuel Pumps products
like Fuel Pumps and
Electric Pump Filter and Strainers, all
priced under $217.99.
Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)
from
$177.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Small-Block 289-351 Ford Engines
- In Tank Mounting Type
- 110 GPH
Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E319609)
from
$51.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Carquest Premium – Electric Fuel Pump (Part No.E2484)
from
$46.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends
- High-performance pump section assembly provides superior performance
- Leading-edge inlet design to increase performance and efficiency, leading to longer life
- High grade outer shell for life-long corrosion resistance
- Optimized, precision-wound armature assembly for increased performance
Holley – Mechanical Fuel Pump (Part No.12-833)
from
$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Various Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Carquest Premium – Fuel Pump Strainer FS260354 (Part No.FS260354)
from
$9.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Mechanical Fuel Pump 360584: Includes Gasket (Part No.360584)
from
$24.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 260585: Includes Gasket (Part No.260585)
from
$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Pump E2510428 (Part No.E2510428)
from
$61.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Delphi – Electric Fuel Pump: With Extra Fitting, Retaining Clips, Seal, Splices, Terminal Hardware (Part No.FD0029)
from
$123.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.HS3496085)
from
$129.99
Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Delphi – Mechanical Fuel Pump: With Gaskets (Part No.MF0162)
from
$34.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Frame mounted mechanical unit
- Always check the fuel filter when replacing the fuel pump
- Gaskets included
KAI – Electric Fuel Pump (Part No.FMD010087)
from
$125.99
New Platinum Pro Electric Fuel Pump Externl Mount, 2 Fuel Pumps May Be Requireduired
Product Features:
See More
Product Features:
- 2 Fuel Pumps May Be Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seals, Retainer Clips (Part No.HP10181)
from
$148.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Lower failure rates due to its innovative design and durability
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
Delphi – Electric Fuel Pump: With Blade Terminal Connectors, Formed Hose Piece, Gasket, Clips, Seals (Part No.FE0127)
from
$73.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Edelbrock – Victor Series fuel pump is for 289-351W Ford (Part No.1715)
from
$182.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Holley – Mechanical Fuel Pump (Part No.12-289-13)
from
$200.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 130+ gph Free Flow
- Shutoff Pressure Pre-Set From 7.5 To 9 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)
from
$217.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170+ gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Delphi – Automotive Turbine Fuel Pump (Part No.E3000464525DEL)
from
$181.34
Delphi Automotive Turbine Fuel Pumps are a family of in-tank pumps designed to provide uninterrupted flow of fuel for gasoline and flexible fuel engines, providing reliability, high efficiency and excellent hot fuel delivery performance. Delphi T-23 Automotive Turbine Fuel Pumps provide excellent low-fuel delivery performance for reliable, uninterrupted fuel flow. They help reduce evaporative emissions because they generate low heat and vapors.
Product Features:
See More
Product Features:
- Proven in-field performance in global applications
- Flexibility to adjust product features and performance to suit customer needs through selection of armature windings, pump section configuration, and component features
- Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel, with blends up to E100
- Highly integrated design for lower overall cost
- Compact 39mm diameter that enables excellent packaging flexibility
- Robust durability with dry run capability
- Exceptional low voltage startability
Spectra Premium – Fuel Pump (Part No.SP1121)
from
$76.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
- High-performance pump section assembly provides superior performance
- Leading-edge inlet design to increase performance and efficiency, leading to longer life
- High grade outer shell for life-long corrosion resistance
- Optimized, precision-wound armature assembly for increased performance
KAI – Fuel Pump Module Assembly (Part No.FMD010083)
from
$62.99
New Platinum Pro Fuel Pump Module
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Mechanical Pump (Part No.SP1012MP)
from
$21.79
CARQUEST mechanical fuel pumps are the only mechanical fuel pumps manufactured in the USA. These pumps are precision-cast units designed to meet or exceed OEM specifications and are built with enhanced, long-lasting components.
Product Features:
See More
Product Features:
- Special heat treated rocker arms and case-hardened pins to ensure long-lasting performance
- Upgraded seals and pump diaphragms for compatibility with modern multi-fuel blends
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Delphi – Fuel Pump Strainer (Part No.FS0068)
from
$9.29
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Spectra Premium – Fuel Pump Strainer (Part No.STR02)
from
$3.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium strainers meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Designed with gradient density to meet or exceed OE specifications
- Engineered and developed in Canada
- Designed to ensure optimal filtration to prevent fuel system contamination
- Strainer material tested and validated for capacity and efficiency by accredited, third party
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Engineered and developed by Spectra Premium; proud member of the A.A.S.A. fuel pump manufacturers working group
Top Picks for 1985 Ford Bronco Oxygen Sensors
Upgrade Ford Broncos with top-quality Oxygen Sensors parts, including 5 OEM and aftermarket selections for your 1985 model.
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)
Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)
from
$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
Bosch – Bosch Oxygen Sensor (Part No.C501033440BOS)
from
$56.17
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
NTK – Switching Oxygen Sensor: 1 Wire, 7" Long, Non-Heated, Direct Fit (Part No.23552)
from
$45.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
In-Demand Air Flow Sensors for 1985 Ford Broncos
Select from 7 premium Air Flow Sensors parts for your 1985 Ford Bronco, with prices ranging from $20.99 to $71.75.
NTK – Manifold Absolute Pressure Sensor (Part No.MA0119)
from
$61.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
- The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1016)
from
$57.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1073)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Walker Products – Air Charge Temperature Sensor (Part No.C6000352505WKR)
from
$34.11
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Spectra Premium – MAP Sensor (Part No.C7044399476RPT)
from
$71.75
MAP Sensor
Delphi – Manifold Absolute Pressure Sensor (Part No.PS10242)
from
$70.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.
Product Features:
See More
Product Features:
- Designed and engineered with Delphi expertise
- Internally protected against moisture intrusion and vibration
- Long lasting and durable
- Designed and engineered with Delphi expertise
Carquest – Air Charge Temperature Sensor (Part No.31A1018)
from
$20.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better
Most Sold 1985 Ford Bronco Gas Caps
Explore our best-selling Ford parts for the 1985 Bronco among 2 OEM and aftermarket options starting from $12.99.
Carquest Premium – Locking Fuel Cap (Part No.10593)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: 10818, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10818)
from
$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Top-Rated Fuel and Emissions Systems Brands For Your 1985 Ford Bronco
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1985 Ford Broncos. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1985 Bronco start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1985 Ford Bronco Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1985 Ford Bronco, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 1985 Ford Bronco. With over 7 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $5.75. Plus, with over 191 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 1985 Ford Bronco Fuel and Emissions Systems
Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1985 Ford Bronco owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1985 Bronco, Advance Auto Parts carries a full inventory of 32 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $1.99 to $396.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 1985 Ford Bronco Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1985 Ford Broncos?
Out of 110 Fuel and Emissions Systems that fit 1985 Ford Broncos, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Pump Includes Includes Strainer (11646057) – $51.99
- UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (5781655) – $14.99
What’s the price range for 1985 Ford Bronco Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1985 Ford Bronco start at $1.99 and go up to $396.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1985 Ford Bronco?
The average price for Fuel and Emissions Systems for the 1985 Ford Bronco is $68.91. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford Bronco model years?
What are the cheapest Fuel and Emissions Systems for my 1985 Ford Bronco?
The cheapest 1985 Ford Bronco Fuel and Emissions Systems we carry in stock are:
- Exhaust Gas Recirculation (EGR) Valve Gasket (12511205) – $1.99
- THROTTLE BODY GASKET SET (20688609) – $2.29
- Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.29
- Fuel Injection Throttle Body Mounting Gasket (3210227) – $2.49
- Exhaust Gas Recirculation (EGR) Valve Gasket (12481919) – $2.49
What types of Fuel and Emissions Systems do you sell for my 1985 Ford Bronco?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1985 Ford Bronco:
Can I get help with 1985 Ford Bronco Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.
What is your return policy for Ford Bronco Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Ford Bronco Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
