1985 Dodge Ramcharger Bodies and Fender Parts
More 1985 Dodge Ramcharger Bodies and Fender Parts
Find your specific 1985 Dodge Ramcharger original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Dodge Ramcharger Bodies and Fender Parts
KAI – Fender (Part No.CH1241112)
from
$464.99
New Standard Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender (Part No.CH1240118)
from
$419.99
New Standard Replacement Driver Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Passenger Side Front Fender (Part No.CH1241118)
from
$409.99
New Standard Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Cab Mount Set (Part No.5.4102R)
from
$138.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Rocker Panel (Part No.RRP304)
from
$29.99
New Standard Replacement Passenger Side Rocker Panel, Standard Cab, 46 1/8 X 5 1/4
Product Features:
See More
Product Features:
- Standard Cab Models, 46 1/8 X 5 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP305)
from
$30.99
New Standard Replacement Driver Side Rocker Panel, Standard Cab, 46 1/8 X 5 1/4
Product Features:
See More
Product Features:
- Standard Cab Models, 46 1/8 X 5 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)
from
$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 1 Pad On The Bar
- Frame Mounted For Maximum Strength
- Powder Coated Steel Braces Resist Rust
- Powder Coated Steel Braces Resist Rust
- Molded Plastic Step Pads For Secure Footing
- Fit Most Full And Mid Size Pickups
Covercraft – Traditional One-Piece Front End Cover – Vinyl, Black (Part No.M618)
from
$139.99
Covercraft’s traditional one-piece hood mask is a specialty cover that retains the installation and protection originally designed. This made them easy to use at the factory test track. Over the years, mask designs have evolved into a two-piece style, but Covercraft has retained some patterns for older specialty vehicles that are in the one-piece design.
Product Features:
See More
Product Features:
- Traditional One-piece styling design
- For older specialty vehicles
- Easy installation and maximum protection
- Protects the area of the car that takes the most abuse
- Micro-perforated finish on vinyl allows mask to breathe
- Moisture vapor evaporates and doesn’t stay trapped
Covercraft – Custom Hood Protector (Part No.45230-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
Le Bra – Front End Cover (Part No.55369-01)
from
$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42719)
from
$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.
Product Features:
See More
Product Features:
- Full Front Area Protection
- Protects Against Bugs, Rock Chips
- Hood Opens with Mask In Place (MM Series)
- Heavy Duty Vinyl with Soft Fleece Back
- Custom Patterned for Easy Installation
- Warranty: 90 Days
Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)
from
$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.
Product Features:
See More
Product Features:
- Classic Styling Of Brite-Tread Aluminum
- Front Or Rear Wheel Protection
- Radius Notch Contours To The Fender Well
- Protected By A BriteGard Powder Coat Finish
Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)
from
$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Universal Fitting
- Easy No Drill Installation
- Perfect Compliment Nerf Bars
Popular 1985 Dodge Ramcharger Bodies and Fender Parts Categories
1985 Dodge Ramcharger Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1985 Dodge Ramcharger. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 10 different Bodies and Fender Parts in our inventory ranging from $28.49 to $661.99. That means you can find the exact parts or products you need to keep that 1985 Dodge Ramcharger running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Dodge Ramcharger. Dee Zee, KAI, and Energy Suspension are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1985 Dodge Ramcharger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1985 Dodge Ramcharger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1985 Dodge Ramcharger Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Dodge Ramcharger demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Ramcharger the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Dee Zee Bodies and Fender Parts
We carry Dee Zee parts in our stock across Splash Guard (Mud Flap) categories, plus more. For a 1985 Dodge Ramcharger, our most popular Dee Zee Bodies and Fender Parts include:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
FAQs for 1985 Dodge Ramcharger Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1985 Dodge Ramcharger?
Out of 10 Bodies and Fender Parts for the 1985 Dodge Ramcharger, the most popular in our inventory are:
from
$48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
