1985 Chrysler Laser Performance and Racing Products
Find Your Specific 1985 Chrysler Laser Performance and Racing Products
Below you will find various in-demand Chrysler Performance and Racing Products, components and accessories for your 1985 Laser. Advance Auto Parts has popular Laser parts like Performance Exhaust Products, Performance Ignition Products, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Laser model years including
1984
1986 and more. Select a category of 1985 Chrysler Laser Performance and Racing Products below and start saving instantly.
Popular 1985 Chrysler Laser Performance and Racing Products Categories
Essential Performance and Racing Products for 1985 Chrysler Lasers
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Energy Suspension – Sway Bar Bushing Set (Part No.5.5105G)
from
$35.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.25" In, 2.25" Out, Round (Part No.17741)
from
$80.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Dyno proven to flow up to 700 SCFM
- Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
- 1.75-inch to 3-inch inlet / outlet configurations
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)
from
$226.99
Product Features:
See More
- Dry To Wet Conversion System
- Hose Included
- Includes Fittings
- Includes Solenoid
- Includes All Necessary Installation Items
Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)
from
$388.99Product Features:
- Easily Concealable
- Install In Minutes
- Quick Removal
- No Obvious Signs Of Installation
- No Obvious Signs Of Use
Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)
from
$926.99Product Features:
- Best Way To Get A Major Power Increase
- Power Increases From 50-70 HP
- Work With Stock ECU
- Simple Installation
- Detailed Instructions
Edelbrock – Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp) (Part No.70070)
Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)
from
$842.99Product Features:
- Best Way To Get A Major Power Increase
- Power Increases From 50-70 HP
- Work With Stock ECU
- Simple Installation
Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)
from
$266.99
Product Features:
See More
- Wet To Dry Conversion System
- Hose Included
- Includes Fittings
- Includes Solenoid
- Includes All Necessary Installation Items
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Upgrade your 1985 Chrysler Laser with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1985 Chrysler Laser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Performance and Racing Products are key to keeping your Laser functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Performance and Racing Products for the 1985 Chrysler Laser, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Chrysler Laser at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.69 to $926.99, with
an average price of $287.43.
Our 14 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1985 Chrysler Laser without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Chrysler Laser, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory Dynomax, and more.
Mallory Performance and Racing Products
start at just $85.29 and boast an impressive 5 stars average rating from customers.
With 108 customer reviews and counting, our 1985 Chrysler Laser Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Chrysler Laser is always ready to roll. We’re committed to providing you with everything you need to keep your Laser in top shape, all in one place.
Start shopping confidently below for your 1985 Chrysler Laser!
Best-Selling Performance Exhaust Products for 1985 Chrysler Lasers
Enhance the driving experience in your Chrysler with 1 quality Performance Exhaust Product components, starting at $80.99.
Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.25" In, 2.25" Out, Round (Part No.17741)
from
$80.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Dyno proven to flow up to 700 SCFM
- Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
- 1.75-inch to 3-inch inlet / outlet configurations
Most Popular 1985 Chrysler Laser Performance Ignition Products
Customize your Chrysler with 3 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $186.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1985 Chrysler Laser Performance Oil Filters
Upgrade Chrysler Lasers with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 1985 model.
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
In-Demand Performance Transmissions for 1985 Chrysler Lasers
Select from 1 premium Performance Transmissions parts for your 1985 Chrysler Laser.
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Most Sold 1985 Chrysler Laser Performance Steering Products
Explore our best-selling Chrysler parts for the 1985 Laser among 1 OEM and aftermarket options starting from $35.99.
Energy Suspension – Sway Bar Bushing Set (Part No.5.5105G)
from
$35.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Top-Rated Performance and Racing Products Brands For Your 1985 Chrysler Laser
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Chrysler Lasers. Below you’ll find some of our best rated Performance and Racing Products from Mallory and Dynomax, and more. Performance and Racing Products from these brands that fit a 1985 Laser start at just $80.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1985 Chrysler Laser Performance and Racing Products
When it comes to maintaining or upgrading your 1985 Chrysler Laser, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1985 Chrysler Laser. With over 2 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $85.29, with an average price of just $136.14. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$85.29
$85.29
(3)
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular Dynomax 1985 Chrysler Laser Performance and Racing Products
Dynomax auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Chrysler Laser owner should feel confident when installing genuine Dynomax parts in their vehicle. To ensure the best fit and performance for your 1985 Laser, Advance Auto Parts carries a full inventory of 1 Dynomax Performance and Racing Products. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Dynomax Performance and Racing Products range up to $80.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$80.99
$80.99
(4)
Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.25" In, 2.25" Out, Round
“Nice fit but this is the second one I replaced on this truck they last about 5 years or less”
FAQs for 1985 Chrysler Laser Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1985 Chrysler Lasers?
Out of 14 Performance and Racing Products that fit 1985 Chrysler Lasers, the following parts are the top sellers:
- Thermocap Radiator Cap (10648825) – $48.09
- Remote Oil Filter Kit (6370003) – $97.99
- Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.25" In, 2.25" Out, Round (18290110) – $80.99
What’s the price range for 1985 Chrysler Laser Performance and Racing Products?
Performance and Racing Product prices for the 1985 Chrysler Laser start at $7.69 and go up to $926.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1985 Chrysler Laser?
The average price for Performance and Racing Products for the 1985 Chrysler Laser is $287.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chrysler Laser model years?
What are the cheapest Performance and Racing Products for my 1985 Chrysler Laser?
The cheapest 1985 Chrysler Laser Performance and Racing Products we carry in stock are:
- CUP (50206003) – $7.69
- Sway Bar Bushing Set (22908558) – $35.99
- Thermocap Radiator Cap (10648825) – $48.09
- Blaster 2 Coil: High Performance Ignition Upgrade (17350171) – $49.99
- Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.25" In, 2.25" Out, Round (18290110) – $80.99
What types of Performance and Racing Products do you sell for my 1985 Chrysler Laser?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1985 Chrysler Laser:
Can I get help with 1985 Chrysler Laser Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Performance and Racing Products and more.
What is your return policy for Chrysler Laser Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chrysler Laser Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
