1985 Chevrolet S10 Performance and Racing Products

Name: Leaf Spring Bushing Set
Brand: Energy Suspension
SKU: 3.2142R
Price: 114.99 USD

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1985 S10. Advance Auto Parts has popular S10 parts like Performance Engines, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other S10 model years including 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and more. Select a category of 1985 Chevrolet S10 Performance and Racing Products below and start saving instantly.

Popular 1985 Chevrolet S10 Performance and Racing Products Categories

Performance Oil Filters

Performance Starters

Performance Intake Manifolds

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Performance Shifters

Performance Transmission Dipstick Tubes

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Radiator Caps

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Posi Units and Components

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Brake Bleeders

Performance Differential Carrier Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Torque Converters

Essential Performance and Racing Products for 1985 Chevrolet S10s

from

$114.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$79.99

MSD Ignition control are easy to install, but we also offer several direct plug-in harnesses for late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Product Features:

Plug-In Harness w/Color Coded Wires
No Cutting Or Splicing
Quick Easy Installation
Provides A Direct Plug-In Installation
When Adding An MSD Ignition Control

from

$112.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$276.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$97.99

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:

Durable Polyurethane
Absorbs Vibration
Last Longer Than Rubber
Built-In Safety Lock

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$48.99

Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

Product Features:

Complete with Mounting Hardware
Adapt To Most Shifter Install
Hurst Quality
Works Well with Round Shift Levers
Chrome ID Plate

from

$30.99

Product Features:

Made of Superior Hyper-Flex+ Material

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
No exhaust crossover openings or blocking shields
Embossed steel core laminate w/coating
Not intended for use in emission controlled vehicles.

from

$43.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$16.99

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

from

$54.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$216.99

Product Features:

Matching Top For Edelbrock Base Intake PN[3785]
Designed for Standard Flange 4-barrel Carburetor
Contains Necessary Linkage And Bracketry
Match With Edelbrock Valve Covers Pn[4488]

from

$91.99

Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

Product Features:

Braided Stainless Steel
Firewall Mounting
Includes Oil Fill Tube

from

$164.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$69.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$28.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$78.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$49.99

Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

Product Features:

Designed to prevent starter overheat due to extreme exhaust temperature
Heat resistant material sandwiched between 2 aluminum plates
Protects Starter From High Temperatures
Made Of 2 Sheets Of Aluminum Heat Resistant Center
Natural Finish

from

$81.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$28.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$749.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

3400-3800 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$222.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$107.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

Upgrade your 1985 Chevrolet S10 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 101 Performance and Racing Products for the 1985 Chevrolet S10, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Chevrolet S10 at great prices. Our Performance and Racing Products inventory for this model ranges from just $8.99 to $899.99, with an average price of $190.43. Our 101 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1985 Chevrolet S10 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Chevrolet S10, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, B & M, Accel, and more. Energy Suspension Performance and Racing Products start at just $9.99 and boast an impressive 4.4 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $45.99, and at an average 4.1 stars rating. With 316 customer reviews and counting, our 1985 Chevrolet S10 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place. Start shopping confidently below for your 1985 Chevrolet S10!

Best-Selling Performance Engines for 1985 Chevrolet S10s

Enhance the driving experience in your Chevrolet with 28 quality Performance Engine components, starting at $8.99.

show more show less

from

$449.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
No exhaust crossover openings or blocking shields
Embossed steel core laminate w/coating
Not intended for use in emission controlled vehicles.

from

$899.99

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$749.99

3400-3800 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6

from

$746.99

High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6

from

$670.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring

from

$636.99

7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring

from

$625.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Hi-Tech 242/242 Hydraulic Flat Cam for Pontiac 151 Iron Duke

from

$566.99

Hi-Tech 242/242 Hydraulic Flat Cam for Pontiac 151 Iron Duke

Hi-Tech 246/246 Hydraulic Flat Cam for Pontiac 151 Iron Duke

from

$549.99

Hi-Tech 246/246 Hydraulic Flat Cam for Pontiac 151 Iron Duke

High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6

from

$531.99

High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6

High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L

from

$531.99

High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L

from

$379.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Ideal for Light-Duty Pickups and Passenger Cars
Unique Design Allows Use Of 2 bbl Or 4 bbl Top

from

$297.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$216.99

Product Features:

Matching Top For Edelbrock Base Intake PN[3785]
Designed for Standard Flange 4-barrel Carburetor
Contains Necessary Linkage And Bracketry
Match With Edelbrock Valve Covers Pn[4488]

from

$206.99

ENGINE ROCKER ARM

from

$132.99

ENGINE ROCKER ARM

from

$57.99

Engine Valve Spring Kit

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12

from

$45.99

High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12

from

$31.99

ENGINE ROCKER ARM

from

$24.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$19.29

ENGINE ROCKER ARM

Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac

from

$15.99

Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac

Most Popular 1985 Chevrolet S10 Performance Exhaust Products

Customize your Chevrolet with 6 Performance Exhaust Products products like Performance Exhaust Mufflers and Performance Exhaust Headers, all priced under $332.99.

show more show less

from

$134.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$132.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$332.99

Product Features:

Fuel Economy From The Engine
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware

from

$164.99

from

$169.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Top Picks for 1985 Chevrolet S10 Performance Ignition Products

Upgrade Chevrolet S10s with top-quality Performance Ignition Products parts, including 8 OEM and aftermarket selections for your 1985 model.

show more show less

from

$77.99

Plug-In Harness w/Color Coded Wires
No Cutting Or Splicing
Quick Easy Installation
Provides A Direct Plug-In Installation
When Adding An MSD Ignition Control

from

$92.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$45.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

42000 Volts
Effective To 6500 RPM
Quicker Starting
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$78.99

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$123.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$51.99

Chrome Plated
42000 Volts
Effective To 6500 RPM
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$114.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

In-Demand Performance Steering Products for 1985 Chevrolet S10s

Select from 8 premium Performance Steering Products parts for your 1985 Chevrolet S10, with prices ranging from $9.99 to $139.99.

show more show less

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$139.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$47.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$107.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$49.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$28.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$28.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Most Sold 1985 Chevrolet S10 Performance Oil Filters

Explore our best-selling Chevrolet parts for the 1985 S10 among 2 OEM and aftermarket options starting from $17.99.

show more show less

from

$17.99

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Top-Rated Performance and Racing Products Brands For Your 1985 Chevrolet S10

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Chevrolet S10s. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1985 S10 start at just $9.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1985 Chevrolet S10 Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Chevrolet S10, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1985 Chevrolet S10. With over 2 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $10.99. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.99

(2)

Control Arm Bump Stop Set

“good quality part”

from $9.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

Popular B & M 1985 Chevrolet S10 Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Chevrolet S10 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1985 S10, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $527.99, plus, with more than 13 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $340.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $299.99

(11)

Automatic Shifter, Z-Gate

“Great shifter”

from $527.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

FAQs for 1985 Chevrolet S10 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1985 Chevrolet S10s?

Out of 101 Performance and Racing Products that fit 1985 Chevrolet S10s, the following parts are the top sellers:

Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
Coil; GM External HEI Coil; High Performance (17350179) – $78.99
Super Stock Coil Chrome (5024277) – $51.99

What’s the price range for 1985 Chevrolet S10 Performance and Racing Products?

Performance and Racing Product prices for the 1985 Chevrolet S10 start at $8.99 and go up to $899.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1985 Chevrolet S10?

The average price for Performance and Racing Products for the 1985 Chevrolet S10 is $190.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet S10 model years?

Yes, we currently carry Performance and Racing Products for 20 model years of Chevrolet S10s between 1982 and 2003. Performance and Racing Products are bought most frequently for the following model years: 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, and 1995.

What are the cheapest Performance and Racing Products for my 1985 Chevrolet S10?

The cheapest 1985 Chevrolet S10 Performance and Racing Products we carry in stock are:

High Energy 6.165" Long, 5/16" Diameter Pushrod (50289328) – $8.99
Tie Rod Dust Boot (17360821) – $9.99
Tie Rod Dust Boot (22906874) – $9.99
Engine Valve Spring (50286657) – $9.99
10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring (50289470) – $10.99

What are the top-rated Performance and Racing Products that fit the 1985 Chevrolet S10?

Out of 316 reviews by customers, our 1985 Chevrolet S10 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 Chevrolet S10 and their top-rated products:

Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Harness; MSD 6 to GM Dual Connector Coil (17350207) – $77.99
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99
Performance Steering Products
- Unilite Ignition Module (17350025) – $92.99
- Harness; MSD 6 to GM Dual Connector Coil (17350207) – $77.99
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99
Performance Oil Filters
- Unilite Ignition Module (17350025) – $92.99
- Harness; MSD 6 to GM Dual Connector Coil (17350207) – $77.99
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99

What types of Performance and Racing Products do you sell for my 1985 Chevrolet S10?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1985 Chevrolet S10:

Can I get help with 1985 Chevrolet S10 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet S10 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet S10 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Chevrolet S10 Performance and Racing Products

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2142R)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Harness; MSD to Late Model; GMs; 96-on (Part No.8877)

Energy Suspension – Control Arm Bushing Set (Part No.3.3162R)

Accel – Tst GM 96-01 4.3L Vortech (Part No.TST1)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)

Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

Energy Suspension – Differential Carrier Bracket Bushing Set (Part No.3.1105G)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

Energy Suspension – Coil Spring Isolator Set (Part No.9.6102R)

Accel – Ignition/Electrical (Part No.130120)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Mr. Gasket – A/Tdipstick (Part No.9704G)

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

Russell – Street Legal (Part No.672360)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5158R)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

Energy Suspension – Control Arm Bushing Set (Part No.3.3119R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5121R)

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Energy Suspension – Body Cab Mount Set (Part No.3.4132G)

Energy Suspension – Body Cab Mount Set (Part No.3.4130R)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6 (Part No.K16-233-4)

B & M – Holeshot 2400 (Part No.70419)

Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Competition Cams – Hi-Tech 242/242 Hydraulic Flat Cam for Pontiac 151 Iron Duke (Part No.52-500-5)

Competition Cams – Hi-Tech 246/246 Hydraulic Flat Cam for Pontiac 151 Iron Duke (Part No.52-502-5)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6 (Part No.CL16-233-4)

Competition Cams – High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L (Part No.CL16-115-4)

Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)

Edelbrock – Performer-Plus Camshaft Kit for Chevy 2.8L 90 Deg V6 (Part No.3790)

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Competition Cams – ENGINE ROCKER ARM (Part No.1413-12)

Competition Cams – ENGINE ROCKER ARM (Part No.1216-12)

Competition Cams – Engine Valve Spring Kit (Part No.980-12)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)

Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7816-12)

Competition Cams – ENGINE ROCKER ARM (Part No.1413-1)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

Competition Cams – ENGINE ROCKER ARM (Part No.1216-1)

Competition Cams – Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (Part No.2900-1)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)

Flowtech – Standard Header (Part No.11502FLT)

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

MSD Ignition – Harness; MSD 6 to GM Dual Connector Coil (Part No.8876)

Mallory – Unilite Ignition Module (Part No.605)

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Accel – GM Hei Supercoil Red/White (Part No.140005)

Accel – Super Stock Coil Chrome (Part No.8140C)

Accel – Supercoil (Part No.140001)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Energy Suspension – Body Cab Mount Set (Part No.3.4131G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5190G)

Energy Suspension – Body Cab Mount Set (Part No.3.4130R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5158R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5121R)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)