1985 Chevrolet K30 Fuel and Emissions Systems
More 1985 Chevrolet K30 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1985 Chevrolet K30, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1985 Chevrolet K30 Fuel and Emissions Systems
Cardone – Fuel Injector Installation Kit (Part No.2K-102)
from
$102.99
CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.
Product Features:
See More
Product Features:
- All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
- Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Cloyes Gear – Fuel Injection Pump Drive Gear (Part No.2823)
from
$48.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
- Helical tooth form for quiet operation and precision machined bore for true fit
- CAD designed and manufactured using premium materials to ensure optimal performance
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Carquest Premium – Mixture Control Solenoid Connector (Part No.PTA1456)
from
$6.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ported Vacuum Switch (Part No.ECA1248)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
GM Genuine Parts – Air Injection Valve (Part No.214-1045)
from
$177.99
GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent exhaust from entering air pump
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Fuel Sender Fuel Strainer (Part No.TS1020)
from
$29.99
Fuel Sender Fuel Strainer
Carquest – Steel Fuel Tank (Part No.576-300)
from
$141.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
GM Genuine Parts – Vacuum Check Valve (Part No.15-50568)
from
$3.49
GM Genuine Parts Vacuum Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1374)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)
from
$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
- Easy Installation
Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004425897DOR)
from
$16.16
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.
Product Features:
See More
Product Features:
- Comes with rubber seal or gasket
- Direct replacement for a proper fit every time
- Corrosion-resistant
- Quality-tested for trouble-free performance
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)
from
$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Fuel Injection Pump Installation Kit (Part No.7135-263)
from
$21.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Part is validated, tested and matched to the vehicle application
- Delphi engineered to meet customer expectations
- Delphi provides O-rings and other components to assist in completing the job
- Manufactured to meet or exceed OE requirements
Carquest – Fuel Tank Selector Switch (Part No.S743)
from
$24.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Our parts are 100% tested to verify both mechanical and electrical switching performance.
- Decades of industry leading research and development focused on meeting the technician’s needs
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
NTK – Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit (Part No.21002)
from
$29.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)
KAI – Fuel Sending Unit (Part No.FSU010029)
from
$69.99
New Platinum Pro Fuel Sending Unit, 80-89 C/K/R/V, 2 Outlets, Lh Side Tank, Except Fi
Product Features:
See More
Product Features:
- 2 Outlets, Left Side Tank, Excludes Fuel Injection
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70950)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
KAI – Fuel Tank Strap (Part No.FST010001)
from
$24.99
New Platinum Pro Fuel Tank Straps With 16 Or 20 Gallon
Product Features:
See More
Product Features:
- 16 Or 20 Gallon, Mid Mount Tank
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Fuel Tank Strap Hardware Kit (Part No.55157)
from
$12.49
This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
- Recommended replacement for the original hardware when servicing or replacing the fuel tank
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Fuel Tank Bracket (Part No.FST019997)
from
$129.99
New Platinum Pro Front Fuel Tank Bracket, With Strap, Made Of Steel
Product Features:
See More
Product Features:
- With Strap
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 1985 Chevrolet K30 Fuel and Emissions Systems Categories
1985 Chevrolet K30 Fuel and Emissions Systems
You count on your 1985 Chevrolet K30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 124 Fuel and Emissions Systems ranging in price from $1.29 to $952.99, you’re sure to find everything you need for your 1985 Chevrolet K30.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 21 different brands like Carquest Premium, Motorad, and Felpro. 1985 Chevrolet K30 Fuel and Emissions Systems start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 3,078 extensive product reviews on 1985 Chevrolet K30 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1985 Chevrolet K30 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1985 Chevrolet K30
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Chevrolet K30 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1985 Chevrolet K30 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1985 Chevrolet K30, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1985 Chevrolet K30 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1985 Chevrolet K30?
Out of 124 Fuel and Emissions Systems for the 1985 Chevrolet K30, the most popular in our inventory are:
from
$23.99
This product is not rated
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack
Gas Caps
What are the top-rated 1985 Chevrolet K30 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1985 Chevrolet K30 based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
