1985 Chevrolet G10 Performance Engines

Essential 1985 Chevrolet G10 Performance Engines

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5867)

Ultra Seal: Valve Cover Gasket Set

from

$38.49
Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick. They fit both 1987-2002 Gen I Chevrolet Small Blocks as well as 1992-1997 Gen II LT-Based Small Blocks.

Product Features:
  • Manufactured from high-density cork /rubber blend gasket material
  • A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
  • Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
  • For OE replacement, high performance street, drag race and oval track
  • .187″ thick
  • Handles Ex Flange Pressure
  • Forms Leak Proof Seal
  • Black Latex Coating
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Engine Crankshaft Seal Kit

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Intake Bolt Kit

from

$75.99
Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 8
  • 12-point head
  • AN washers with no exposed shoulder for a professional appearance
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Sure Seat Valve Springs for Chevy 4.3L 90 Deg V6 200, 229, 262 (Part No.5813)

Sure Seat Valve Springs for Chevy 4.3L 90 Deg V6 200, 229, 262

from

$43.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Bolt Water Pump (Part No.4998)

Bolt Water Pump

from

$32.99
This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

Product Features:
  • Chrome Plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
See More

Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)

CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA

from

$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Edelbrock – Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242 (Part No.4243)

Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242

from

$41.99
Product Features:
  • Replacement Gasket Set For PN[4242]
See More

Edelbrock – RPM AIR-Gap Dual-Quad Small Block Chevy Endurashine Intake Manifold (Part No.75254)

RPM AIR-Gap Dual-Quad Small Block Chevy Endurashine Intake Manifold

from

$536.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Finish-Bright Silver Chrome That Will Not Discolor
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Edelbrock – Small Block Chevy Street Tunnel Ram Polished (Part No.71101)

Small Block Chevy Street Tunnel Ram Polished

from

$1268.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:
  • Street Tunnel Ram; Intake Manifold Top
See More

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

Pushrod Set for S/B Chevy

from

$189.99


Product Features:
  • Case-Hardened Tubing
  • Welded Ends
  • 5/16 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)

Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

from

$157.99
Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:
  • 3/8″ Diameter, 7.800″ Length
  • Magnum Pushrods for Small Block Chevy
  • One-piece .080″ wall chromemoly steel tubing
  • Heat-treated for extended durability and guide plate compatibility
  • Precision formed and reinforced pushrod end
See More

Mr. Gasket – Intake Gasket (Part No.143)

Intake Gasket

from

$42.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

from

$27.99
Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

Product Features:
  • 1.28″x2.10″
  • Stock Port Style
  • .060″ Thick
  • Multi Piece Configuration
  • Composite Material
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$99.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Performer Series Retainer (Qty 16)

from

$95.99
Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:
  • Valve Spring Retainers for Use OE Cast Iron Heads
  • Superior Quality Heat-Treated Steel
  • Machined for Strength with Black Oxide Finish
  • Finish Ensures Rust and Corrosion Protection
See More

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Cylinder Head Dowel Pins

from

$14.99
Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More

Edelbrock – Engine Cylinder Head (Part No.60849)

Engine Cylinder Head

from

$605.99


Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • Hand-Blended Intake and Exhaust Bowls
  • CNC-Matched Intake/Exhaust Ports in Std Location
  • Thicker Deck Surfaces than Other Brands
  • Hardened Tip Stainless Swirl-Polished Valves
  • Heli-Coils Rocker Studs And Exhaust Bolt Holes
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60759)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$1014.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1819)

PERFORMANCE OIL PAN GASKET SET

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

Ultra Seal: Oil Pan Gasket

from

$42.49
Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile rubber composition gasket material
  • Provides excellent sealing and durability
  • Complete with molded rubber front/rear oil pan end seals where applicable
  • For OE replacement, high performance street, drag race and oval track use
  • Graphite Non-Wicking Rubber
  • No Cork Particles
  • Easy Removal For Disassembly
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$94.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Ultra Seal: Screw-In Rocker Arm Studs

from

$65.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Grade 8 Steel
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:
  • They Are Zinc Dichromate Plated Steel
  • They Have Black Oxide Coated Set Screws
  • Keeps Rocker Arms Positively Locked
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Includes Locks and Hex Wrench
  • Shank O.D. .603″
See More

1985 Chevrolet G10 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1985 Chevrolet G10. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 91 different Performance Engines in our inventory ranging from $14.99 to $1,268.99. That means you can find the exact parts or products you need to keep that 1985 Chevrolet G10 running smoothly.

Performance Engines are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Chevrolet G10. Mr. Gasket, Edelbrock, and FEL-PRO Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1985 Chevrolet G10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 190 reviews in this category, some of the top rated parts include Action Plus Water Pumps with 3.7 stars and Action Plus Water Pumps with 1.5 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1985 Chevrolet G10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1985 Chevrolet G10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Chevrolet G10 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your G10 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular B & M Performance Engines

We carry B & M parts in our stock across Performance Torque Converters categories, plus more. For a 1985 Chevrolet G10, our most popular B & M Performance Engines include:
Tork Master 2400
from $339.99
(1)
Tork Master 2400
Performance Torque Converters
Tork Master 3000
from $499.99
(1)
Tork Master 3000
Performance Torque Converters

Top 1985 Chevrolet G10 Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1985 Chevrolet G10. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

FAQs for 1985 Chevrolet G10 Performance Engines

What are the most purchased Performance Engines for the 1985 Chevrolet G10?

Out of 91 Performance Engines for the 1985 Chevrolet G10, the most popular in our inventory are:
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
from $195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets

What are the top-rated 1985 Chevrolet G10 Performance Engines?

Top-rated Performance Engines for your 1985 Chevrolet G10 based on customer reviews/ratings are:
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
“I bought this item for my 1979 Camaro SBC for Street/Strip application. Water pump weighs 4 LBS less than factory, comes with its own cork gaskets. N”
Action Plus Water Pumps
from $215.99
(2)
Action Plus Water Pumps
“The twisted neck comes to far up on the hub. For a 2 groove pulley it causes the pulley to hit the water pump. You will also need new bolts for the”
MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST
from $213.99
(1)
MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST
“just spill on break in oil on rocker wheels,adjust nut down till u can’t go any more and then back off 1/2 turn and your done no noise on start up eve”