1985 Chevrolet Corvette Body Parts
Find Your Specific 1985 Chevrolet Corvette Body Parts
Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 1985 Corvette. Advance Auto Parts has popular Corvette parts like Vehicle Hoods, Vehicle Doors, Vehicle Latches and Handles and more. You’ll also find aftermarket and OEM Body Parts for other Corvette model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 1985 Chevrolet Corvette Body Parts below and start saving instantly.
Popular 1985 Chevrolet Corvette Body Parts Categories
Essential Body Parts for 1985 Chevrolet Corvettes
Dorman – Help – Door Lock Rod Clips (Part No.75453)
from
$4.29
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
AmeriSeal – 1982 Corvette Rear Hatch Weatherstrip Each (Part No.34277)
Dorman – Hood Release Cable with Handle (Part No.912-181)
from
$33.49
Hood release cable broken- This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
StrongArm – Trunk Lift Support: 11.28" Ext Length, 3.75" Travel, 44 Lbs of Force, 1 Pk (Part No.E4066)
from
$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Burco – SIDE VIEW MIRROR (Part No.4065)
from
$39.99
Premiering the Burco 4065 replacement side view mirror, the ultimate solution to boost your Chevrolet Corvette¿s safety and visibility! This glass-only replacement is crafted specifically for your vehicle, ensuring a seamless fit that makes installation a breeze¿no professional help necessary! Wave goodbye to the frustrations of a shattered mirror and embrace crystal-clear views. Not only does this economical choice comply with all safety standards, but it¿s also budget-friendly, so you can upgrade without breaking the bank. Built to withstand the elements, the Burco 4065 provides peace of mind on every drive. With quick and easy installation, you¿ll be back on the road with confidence in no time. Enhance your ride today with this dependable, high-quality side view mirror that perfectly balances safety and affordability!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Carquest Premium – Door Lock Switch Connector (Part No.PTC1703)
from
$47.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
AmeriSeal – 63-67 Corvette Convertible Door Weatherstrips Pair (Part No.34279)
Dorman – Help – Door Lock Switch – 1 Button (Part No.49218)
from
$9.99
This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications
- Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Trunk Lock (Part No.TLC1052)
from
$14.99
This trunk lock kit contains the needed components necessary to replace the truck lock assembly on the listed vehicle application.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Needa Parts – Door Hinge Bushings, .344 In. Id X .490 In. Od X .370 In. Height (Part No.38376)
from
$2.29
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
AmeriSeal – 84-96 Corvette Targa Top Side Weatherstrips Pair (Part No.34270)
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Carquest Premium – Door Window Switch (Part No.WSC3004)
from
$81.99
The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)
from
$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
- Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Multi-Use Connector (Part No.PTA1077)
from
$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Help – Door Lock Rod Clip Assortment (Part No.75473)
from
$7.49
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Multi-Use Connector (Part No.PTA3116)
from
$62.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)
from
$8.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)
from
$5.29
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for Length-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
AmeriSeal – 68-72 Corvette Coupe Pillar Post Weatherstrip w/hinge (Part No.34263)
AmeriSeal – 68-69 Corvette Convertible Door Lock Pillar Weatherstrip (Part No.34274)
Le Bra – Front End Cover (Part No.55089-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.55014-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Burco – SIDE VIEW MIRROR (Part No.2132)
from
$39.99
Say hello to the Burco 2132 replacement side view mirror, your go-to solution for classic vehicles like the Buick Riviera, Chevrolet Corvette, and Pontiac Grand Prix! This glass-only replacement offers an economical way to tackle broken mirrors without straining your wallet, ensuring safety and visibility on the road. Installation is a breeze¿no special tools needed, so you can quickly restore functionality and get back to enjoying your ride! The Burco 2132 meets all safety compliance standards, providing peace of mind as you cruise. With compatibility for models like the Chevrolet Malibu, Oldsmobile Cutlass, and Buick Skylark, this mirror is perfect for enthusiasts who appreciate precision and reliability. Don¿t let a cracked mirror hold you back; choose the Burco 2132 and drive with confidence!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – SIDE VIEW MIRROR (Part No.2439)
from
$39.99
Showcasing the Burco 2439 replacement car mirror, specifically designed for the Chevrolet Corvette, this premium side view mirror offers a seamless blend of safety and visibility for your driving experience. If you¿re facing a broken mirror, this glass-only automotive mirror replacement is a perfect solution that won¿t strain your budget. With easy installation, you can quickly restore your vehicle’s functionality and enhance safety on the road. Compliant with safety standards, the Burco 2439 not only provides clarity but also ensures your Corvette maintains its sleek design. Don¿t let a damaged side mirror hold you back; upgrade today with the Burco 2439 and experience the confidence that comes with a reliable, high-quality side mirror glass replacement!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Dorman – Mud Shield Retainer (Part No.963-014D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Upgrade your 1985 Chevrolet Corvette with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Body Parts for the 1985 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Vehicle Hood
replacements to
Vehicle Doors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1985 Chevrolet Corvette at great prices.
Our Body Parts inventory for this model
ranges from just $1.99 to $209.99, with
an average price of $49.21.
Our 32 Body Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1985 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Chevrolet Corvette, we stock popular OEM and aftermarket Body Parts from top names
like StrongArm, Dorman, AmeriSeal, and more.
StrongArm Body Parts
start at just $21.99 and boast an impressive 4.5 stars average rating from customers.
Dorman and AmeriSeal also bring quality to the table, with Body Parts available starting at $5.99, and at an average 4.2 stars rating.
With 27 customer reviews and counting, our 1985 Chevrolet Corvette Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 1985 Chevrolet Corvette!
Best-Selling Vehicle Hoods for 1985 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 5 quality Vehicle Hood components, starting at $4.99.
StrongArm – Hood Lift Support: 6.38" Ext Length, 1.45" Travel, 263 Lbs of Force, 1 Pk (Part No.F4003)
from
$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Dorman – Hood Release Cable Assembly Pair (Part No.912-030)
from
$44.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – Mud Shield Retainer (Part No.963-014D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Atlas Lift – Lift Support (Part No.LS10311)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
- Trilingual Install Instructions provided inside each package
StrongArm – Liftgate Lift Support: 33.62" Ext Length, 11.0" Travel, 52 Lbs of Force, 1 Pk (Part No.A4903)
from
$49.49
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
Most Popular 1985 Chevrolet Corvette Vehicle Doors
Customize your Chevrolet with 11 Vehicle Doors products
like Door Hinge Pin Kits,
Door Seals, and
Door Lock Clips, all
priced under $197.99.
Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)
from
$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
- Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Door Lock Rod Clips (Part No.75453)
from
$4.29
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Multi-Use Connector (Part No.PTA1077)
from
$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Help – Door Lock Switch – 1 Button (Part No.49218)
from
$9.99
This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications
- Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Needa Parts – Door Hinge Bushings, .344 In. Id X .490 In. Od X .370 In. Height (Part No.38376)
from
$2.29
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rivet-Push In-Hole Diameter .500"-Head Diameter 1"-Length .900 In (Sold by each) (Part No.700-575)
from
$2.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
AmeriSeal – 84-96 Corvette Header Weatherstrip Each (Part No.34259)
AmeriSeal – 84-89 Corvette Door Weatherstrips Pair (Part No.34278)
Carquest Premium – Multi-Use Connector (Part No.PTA3116)
from
$62.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Door Lock Switch Connector (Part No.PTC1703)
from
$47.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Top Picks for 1985 Chevrolet Corvette Vehicle Latches and Handles
Upgrade Chevrolet Corvettes with top-quality Vehicle Latches and Handles parts, including 2 OEM and aftermarket selections for your 1985 model.
Dorman – Help – Door Lock Rod Clips (Part No.75452)
from
$5.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Door Lock Rod Clips (Part No.75455)
from
$7.49
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Bodies and Fender Parts for 1985 Chevrolet Corvettes
Select from 4 premium Bodies and Fender Parts parts for your 1985 Chevrolet Corvette, with prices ranging from $2.79 to $169.99.
AmeriSeal – 84-96 Corvette Rear Hatch Weatherstrip Each (Part No.34258)
Dorman – GM Bumper Retainer (Part No.961-070D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Le Bra – Front End Cover (Part No.55089-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Most Sold 1985 Chevrolet Corvette Vehicle Mirrors
Explore our best-selling Chevrolet parts for the 1985 Corvette among 3 OEM and aftermarket options starting from $13.49.
K-Source – FLAT GLASS, Driver or Passenger Side Replacement Glass (Part No.99004)
from
$13.49
Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- The most economical way to replace cracked Mirror glass
- Glass measures 3 3/16″ tall by 6 5/8″ wide and 7 1/8″ diagonally
- This glass fits Mirrors with Power function only
- Mounting tape included for low-hassle stick-on installation
- Step-by-step instructions for easy installation
K-Source – Passenger Car Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape & Instructions (Part No.90004)
from
$13.49
Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- The most economical way to replace cracked Mirror glass
- Glass measures 3 1/16″ tall by 7″ wide and 7 7/16″ diagonally
- This glass fits Mirrors with Power function only
- Mounting tape included for low-hassle stick-on installation
- Step-by-step instructions for easy installation
Burco – SIDE VIEW MIRROR (Part No.2418)
from
$39.99
Set sail with the Burco 2418 replacement car mirror and transform your driving experience for classic models like the Chevrolet Camaro, Corvette, Monte Carlo, El Camino, Pontiac Fiero, and Firebird. This Glass Only side view mirror makes installation a breeze, allowing you to get back on the road quickly and economically¿no need to break the bank! Designed with safety in mind, this mirror enhances your visibility and ensures compliance with safety standards. With the Burco 2418, you can feel confident knowing your side view mirror is not only reliable but also built to last. Don¿t let a broken mirror slow you down¿opt for the Burco 2418 for a do-it-yourself solution that keeps your vehicle looking sharp and your journeys safe!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Top-Rated Body Parts Brands For Your 1985 Chevrolet Corvette
Shop for the best-rated brands offering Body Parts and other products for your 1985 Chevrolet Corvettes. Below you’ll find some of our best rated Body Parts from StrongArm, Dorman, and AmeriSeal, and more. Body Parts from these brands that fit a 1985 Corvette start at just $5.99 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular StrongArm 1985 Chevrolet Corvette Body Parts
When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 1985 Chevrolet Corvette. With over 1 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.99. Plus, with over 1 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$21.99
(1)
Hood Lift Support: 6.38" Ext Length, 1.45" Travel, 263 Lbs of Force, 1 Pk
“Used these to replace my very worn out originals on an ’87 Vette, was really surprised by the assist they give with the huge hood since theyre so smal”
Popular Dorman 1985 Chevrolet Corvette Body Parts
Dorman auto parts is one of the highest quality Body Part brands in the market. Any 1985 Chevrolet Corvette owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1985 Corvette, Advance Auto Parts carries a full inventory of 3 Dorman Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Body Parts range from $5.99 to $8.49, plus, with more than 12 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
from
$8.49
(4)
Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings
“I purchased these for an 1982 K5 Chevy Blazer rear tailgate hinge pins. They work perfect for this application.”
from
$7.49
(4)
Door Lock Rod Clips
“Just what I needed to fix the tailgate latch on my 2001 Silverado. It was easy to install and the part was not expensive.”
FAQs for 1985 Chevrolet Corvette Body Parts
Which Body Parts are best-sellers for 1985 Chevrolet Corvettes?
Out of 32 Body Parts that fit 1985 Chevrolet Corvettes, the following parts are the top sellers:
- Door Lock Rod Clips (9111646) – $5.99
- GM Bumper Retainer (11910693) – $4.99
- Door Lock Rod Clips (17190420) – $4.29
What’s the price range for 1985 Chevrolet Corvette Body Parts?
Body Part prices for the 1985 Chevrolet Corvette start at $1.99 and go up to $209.99 for the most premium parts.
What’s the average price of a Body Part for a 1985 Chevrolet Corvette?
The average price for Body Parts for the 1985 Chevrolet Corvette is $49.21. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Chevrolet Corvette model years?
What are the cheapest Body Parts for my 1985 Chevrolet Corvette?
The cheapest 1985 Chevrolet Corvette Body Parts we carry in stock are:
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
- Door Hinge Bushings, .344 In. Id X .490 In. Od X .370 In. Height (9111158) – $2.29
- Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.79
- Rivet-Push In-Hole Diameter .500"-Head Diameter 1"-Length .900 In (Sold by each) (22142357) – $2.99
- Door Lock Rod Clips (17190420) – $4.29
What are the top-rated Body Parts that fit the 1985 Chevrolet Corvette?
Out of 27 reviews by customers, our 1985 Chevrolet Corvette Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1985 Chevrolet Corvette and their top-rated products:
- Vehicle Hoods
- Hood Lift Support: 6.38" Ext Length, 1.45" Travel, 263 Lbs of Force, 1 Pk (5940109) – $21.99
- Hood Release Cable Assembly Pair (10191453) – $44.99
- Trunk and Tailgate Parts
- Hood Lift Support: 6.38" Ext Length, 1.45" Travel, 263 Lbs of Force, 1 Pk (5940109) – $21.99
- Hood Release Cable Assembly Pair (10191453) – $44.99
What types of Body Parts do you sell for my 1985 Chevrolet Corvette?
As of 3/1/26, these are some of the most in-demand types of Body Parts for a 1985 Chevrolet Corvette:
Can I get help with 1985 Chevrolet Corvette Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.
What is your return policy for Chevrolet Corvette Body Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
