1985 Chevrolet C10 Fuel and Emissions Systems
More 1985 Chevrolet C10 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1985 Chevrolet C10, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1985 Chevrolet C10 Fuel and Emissions Systems
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1374)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)
from
$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Dorman – Help – Fuel Tank Strap Hardware Kit (Part No.55157)
from
$12.49
This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
- Recommended replacement for the original hardware when servicing or replacing the fuel tank
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
GM Genuine Parts – Vacuum Check Valve (Part No.15-50568)
from
$3.49
GM Genuine Parts Vacuum Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)
from
$73.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
- The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Carquest Premium – Ported Vacuum Switch (Part No.SBA5436)
from
$64.99
Ported Vacuum Switch
Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)
from
$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.
Product Features:
See More
Product Features:
- Necessary if switching to electric fuel pump
- Includes block off plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Walker – Exhaust Oxygen Sensor Bung Plug for Secure Seal (Part No.35299)
from
$6.99
Walker?, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker? is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Used for HEGO connector when oxygen sensor is not required
- Provides secure seal
- New accessories help to ensure effective exhaust repairs
- Walker? supplies all of the accessories you need to do the complete exhaust job
- Walker? offers a full line of pipes and accessories
Carquest Premium – Remanufactured Diesel Fuel Injection Pump (Part No.AM91073)
from
$638.99
CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes pump mounting o-ring
Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004425897DOR)
from
$16.16
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.
Product Features:
See More
Product Features:
- Comes with rubber seal or gasket
- Direct replacement for a proper fit every time
- Corrosion-resistant
- Quality-tested for trouble-free performance
KAI – Fuel Sending Unit (Part No.FSU010024)
from
$74.99
New Platinum Pro Fuel Sending Unit, 73-79 C/K Pu, With 3 Outlets, Rh Side Tank
Product Features:
See More
Product Features:
- 73-79 C/K Pickup, With 3 Outlets, Right Side Tank
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Fuel Tank Straps (Part No.578-001)
from
$26.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Carquest Premium – New Diesel Fuel Injector (Part No.AN11033)
from
$67.99
CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Includes copper combustion seal
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Dorman – Help – Air Check Valve (Part No.55050)
from
$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Product Features:
See More
Product Features:
- Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
- Air Check Valve
- The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
- Include gaskets and mounting hardware for a complete repair
- Direct replacement for a proper fit every time
Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-274)
from
$37.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Fuel Sender Fuel Strainer (Part No.TS1020)
from
$29.99
Fuel Sender Fuel Strainer
Carquest Premium – Fuel Tank Selector Switch (Part No.SBA4538)
from
$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cloyes Gear – Fuel Injection Pump Drive Gear (Part No.2823)
from
$48.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
- Helical tooth form for quiet operation and precision machined bore for true fit
- CAD designed and manufactured using premium materials to ensure optimal performance
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
KAI – Fuel Tank Bracket (Part No.FST019998)
from
$129.99
New Platinum Pro Rear Fuel Tank Bracket, With Strap, Made Of Steel
Product Features:
See More
Product Features:
- With Strap
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Fuel Tank Selector Valve (Part No.FSV3)
from
$84.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Robust designs backed by focused research meet today’s technical needs
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70950)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Felpro – Fuel Pump Mounting Gasket (Part No.70150)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1985 Chevrolet C10 Fuel and Emissions Systems Categories
1985 Chevrolet C10 Fuel and Emissions Systems
You count on your 1985 Chevrolet C10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 123 Fuel and Emissions Systems ranging in price from $1.29 to $1,144.99, you’re sure to find everything you need for your 1985 Chevrolet C10.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 22 different brands like Carquest Premium, Motorad, and Felpro. 1985 Chevrolet C10 Fuel and Emissions Systems start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 3,728 extensive product reviews on 1985 Chevrolet C10 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1985 Chevrolet C10 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1985 Chevrolet C10
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Chevrolet C10 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1985 Chevrolet C10 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1985 Chevrolet C10, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1985 Chevrolet C10 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1985 Chevrolet C10?
Out of 123 Fuel and Emissions Systems for the 1985 Chevrolet C10, the most popular in our inventory are:
from
$23.99
This product is not rated
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack
Gas Caps
What are the top-rated 1985 Chevrolet C10 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1985 Chevrolet C10 based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
