1985 Buick LeSabre Performance and Racing Products

Name: Coil Spring Isolator Set
Brand: Energy Suspension
SKU: 3.6108G
Price: 13.29 USD

Below you will find various in-demand Buick Performance and Racing Products, components and accessories for your 1985 LeSabre. Advance Auto Parts has popular LeSabre parts like Performance Distributors, Performance Exhaust Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other LeSabre model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1985 Buick LeSabre Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1985 Buick LeSabre Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Coils

Performance Shifters

Performance Valve Covers

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Differential Covers

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Oil Pans

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Ball Joint Boots

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Engine Valve Stem Seal Sets

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1985 Buick LeSabres

from

$13.29

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$12.99

Spectre’s Chevrolet V8 water neck fits 1966 – 1995 Chevy V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:

Fits 1966 – 1995 Chevy V8 engines
Includes bolts
Chrome plated
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$116.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$297.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$32.49

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Resists Deteriorating
Provides Excellent Torque Retention

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$403.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$81.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Graphite supression eliminates RFI/EMI
3,000 to 7,000 ohms per foot of resistance
Silicone Spark Plug Boots
450 Degree Temperature Rating

from

$149.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

from

$66.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$126.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$539.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Use w/Reverse Pattern Valve Body
Includes Neutral Safety Switch
Includes Backup Light Switch

from

$166.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$83.99

COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:

Cast iron camshaft gear and induction hardened billet steel crank sprocket
Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
Ideal for all street performance and race applications
Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
Dynamically balanced and quality checked for run-out tolerances

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$360.99

RngPnn

from

$77.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$33.99

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

Premium quality wire harness and capacitor.
Insure good connection and “static free” operation.

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$511.99

A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.

Product Features:

High Perf. Friction Materials
Complete Overhaul Gasket Set
Modification Components
Replacement Valves
Replacement Springs
Drain Plug Kit Included

from

$10.99

11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring

from

$88.99

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.

Product Features:

Designed w/performance in mind
High quality; voltage insulating material
Stainless Terminals
High dielectric properties

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$199.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

Upgrade your 1985 Buick LeSabre with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Buick LeSabre, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your LeSabre functioning at its best. At Advance Auto Parts, we offer a wide selection of 116 Performance and Racing Products for the 1985 Buick LeSabre, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Buick LeSabre at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,421.99, with an average price of $253.54. Our 116 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1985 Buick LeSabre without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Buick LeSabre, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, Holley, B & M, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $349.99, and at an average 4.2 stars rating. With 756 customer reviews and counting, our 1985 Buick LeSabre Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Buick LeSabre is always ready to roll. We’re committed to providing you with everything you need to keep your LeSabre in top shape, all in one place. Start shopping confidently below for your 1985 Buick LeSabre!

Best-Selling Performance Distributors for 1985 Buick LeSabres

Enhance the driving experience in your Buick with 4 quality Performance Distributor components, starting at $17.49.

show more show less

from

$28.99

Precision machined chromoly weights and center plate.
Designed to eliminate erratic timing.
Includes three sets of springs.
Complete installation instructions make recurving your distributor easy.

from

$54.99

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

Stock GM HEI replacement distributor cap
Red

from

$33.99

Premium quality wire harness and capacitor.
Insure good connection and “static free” operation.

from

$17.49

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

Most Popular 1985 Buick LeSabre Performance Exhaust Products

Customize your Buick with 1 Performance Exhaust Products products like Performance Exhaust Manifold Gaskets, all priced under $34.99.

show more show less

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Top Picks for 1985 Buick LeSabre Performance Fuel Systems

Upgrade Buick LeSabres with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1985 model.

show more show less

from

$509.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$716.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$819.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

In-Demand Performance Ignition Products for 1985 Buick LeSabres

Select from 7 premium Performance Ignition Products parts for your 1985 Buick LeSabre, with prices ranging from $34.49 to $204.99.

show more show less

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$126.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$88.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP DR-37
MSD 8226
Resist Corrosion
W/New Mounting Hardware

from

$81.99

Graphite supression eliminates RFI/EMI
3,000 to 7,000 ohms per foot of resistance
Silicone Spark Plug Boots
450 Degree Temperature Rating

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$70.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

Most Sold 1985 Buick LeSabre Performance Engines

Explore our best-selling Buick parts for the 1985 LeSabre among 38 OEM and aftermarket options starting from $7.99.

show more show less

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$230.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with stock guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$223.99

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$471.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1421.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$479.99

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$449.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$428.99

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$416.99

Cam & Lifter Kit, Oldsmobile V8 280 Magnum Hydraulic 1 Ea

from

$416.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$405.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$402.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$401.99

16 Springs

from

$399.99

ENG ROCKER ARM KIT

from

$350.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$341.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$328.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$297.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Top-Rated Performance and Racing Products Brands For Your 1985 Buick LeSabre

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Buick LeSabres. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1985 LeSabre start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1985 Buick LeSabre Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Buick LeSabre, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1985 Buick LeSabre. With over 2 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $9.14. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

from $12.29

(2)

Control Arm Bump Stop Set

“good quality part”

Popular Holley 1985 Buick LeSabre Performance and Racing Products

Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Buick LeSabre owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1985 LeSabre, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $509.99

(45)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”

from $716.99

(2)

Prem Street Carbs (Avengers)

“This was the carb that my engine builder suggested.”

from $699.99

(6)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

“great carb”

FAQs for 1985 Buick LeSabre Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1985 Buick LeSabres?

Out of 116 Performance and Racing Products that fit 1985 Buick LeSabres, the following parts are the top sellers:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Oil Pan Bolt Kit (17360377) – $20.79

What’s the price range for 1985 Buick LeSabre Performance and Racing Products?

Performance and Racing Product prices for the 1985 Buick LeSabre start at $5.99 and go up to $1,421.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1985 Buick LeSabre?

The average price for Performance and Racing Products for the 1985 Buick LeSabre is $253.54. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Buick LeSabre model years?

Yes, we currently carry Performance and Racing Products for 45 model years of Buick LeSabres between 1959 and 2005. Performance and Racing Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Performance and Racing Products for my 1985 Buick LeSabre?

The cheapest 1985 Buick LeSabre Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
High Energy 8.500" Long, 5/16" Diameter Pushrod (50289696) – $7.99
Engine Valve Spring (50286657) – $9.99

What are the top-rated Performance and Racing Products that fit the 1985 Buick LeSabre?

Out of 756 reviews by customers, our 1985 Buick LeSabre Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 Buick LeSabre and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99
Performance Steering Products
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1985 Buick LeSabre?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1985 Buick LeSabre:

Can I get help with 1985 Buick LeSabre Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.

What is your return policy for Buick LeSabre Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Buick LeSabre Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Buick LeSabre Performance and Racing Products

Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Spectre – Water Neck Chev Late w/Hdr (Part No.42313)

Energy Suspension – Control Arm Bushing Set (Part No.3.3105R)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam (Part No.42-225-4)

Mr. Gasket – Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing (Part No.150A)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-233-4)

Accel – 8Mm Super Stock Graphite Cust (Part No.4053)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Energy Suspension – Control Arm Bushing Set (Part No.3.3169G)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Accel – GM Hei Supercoil Red/White (Part No.140005)

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Competition Cams – TIMING SET, HIGH TECH SMALL BLOCK CHEVY 1 EA (Part No.3100)

Mallory – Distributor Wiring Harness (Part No.29349)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Richmond Gear – RngPnn (Part No.49-0009-1)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)

Competition Cams – 11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring (Part No.712-1)

MSD Ignition – Distributor Cap; Extreme Output; GM HEI (Part No.84111)

Competition Cams – PUSHROD SET, SBC 3/8 1 ST (Part No.7513-16)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

Accel – Ignition/Electrical (Part No.130120)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Holley – Off Road Carbs (Part No.0-90670)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM Hei Supercoil Red/White (Part No.140005)

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

Accel – 8Mm Super Stock Graphite Cust (Part No.4053)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Spectre – Water Neck; Olds (Part No.4733)

Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-600-5)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam K-Kit (Part No.K42-222-4)

Competition Cams – High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-400-8)

Competition Cams – High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-300-8)

Competition Cams – High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-200-8)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6 (Part No.69-246-4)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-224-4)

Competition Cams – High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6 (Part No.69-248-4)

Competition Cams – Cam & Lifter Kit, Oldsmobile V8 280 Magnum Hydraulic 1 Ea (Part No.CL42-231-4)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-225-4)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-308-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL42-229-4)

Competition Cams – 16 Springs (Part No.26995-16)

Competition Cams – ENG ROCKER ARM KIT (Part No.1441-KIT)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam (Part No.42-601-5)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam (Part No.42-225-4)