1985 Buick LeSabre Performance and Racing Products

Below you will find various in-demand Buick Performance and Racing Products, components and accessories for your 1985 LeSabre. Advance Auto Parts has popular LeSabre parts like Performance Exhaust Products, Performance Fuel Systems, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other LeSabre model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1985 Buick LeSabre Performance and Racing Products below and start saving instantly.

Popular 1985 Buick LeSabre Performance and Racing Products Categories

Performance Oil Filters

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Air Filters

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Valve Covers

Performance Engine and Transmission Mounts

Performance Water Outlets

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Front Shock and Struts

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Oil Pans

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Brake Bleeders

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Ball Joint Boots

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Engine Valve Stem Seal Sets

Essential Performance and Racing Products for 1985 Buick LeSabres

from

$341.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$48.99

With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:

Advance the cam for increased torque and horsepower
Tune your powerband for more end torque or increase top end horsepower
Includes (4) offset bushings and (1) 0 degree bushing
Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
Increase Top-End Horsepower

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$114.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$899.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$65.99

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:

See catalog for application information
Features 60K V Rated Alkyd Compound

from

$100.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$29.99

Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$83.99

Shift Improver Kit – 1981 to 1990 Chevrolet, Buick, Olds, Pontiac, GMC TH-200-4R Application: 1981 to 1990 Chevrolet, Buick, Olds, Pontiac, GMC TH-200-4R Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$28.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$61.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants

from

$119.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$40.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$31.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$87.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$499.99

The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.

Product Features:

Forward and Reverse Shift Patterns
Chrome Plated Trigger for Detent Activity
Factory Neutral Safety Switch
Compact And Lightweight
Roller Detent with Shifter Pattern

from

$499.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$20.99

The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:

Ideal For Tight Spaces
Serrations Prevent Loosening
Flange Distributes Pressure
Zinc Plated Bolts
Grade 5 Material
Easy Installation

from

$433.99

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al

Product Features:

Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Increase engine power, enhance valve train stability and improve oiling
Designed for high performance street and race engines
Arced channel & contoured top give the rockers the best strength to weight ratio possible

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$243.99

Product Features:

GM 10BL 8.5 R/P 2.73 FRT/REAR MGP

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$12.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$93.99

Product Features:

Water/Weather Resistant
Re-Useable
Will Not Burn Or Blow Out
Suitable For Port-Matching
Made In USA

from

$37.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

Upgrade your 1985 Buick LeSabre with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Buick LeSabre, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your LeSabre functioning at its best. At Advance Auto Parts, we offer a wide selection of 131 Performance and Racing Products for the 1985 Buick LeSabre, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Fuel Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Buick LeSabre at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $1,421.99, with an average price of $230.69. Our 131 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 1985 Buick LeSabre without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Buick LeSabre, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Energy Suspension, B & M, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. Energy Suspension and B & M also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4.4 stars rating. With 981 customer reviews and counting, our 1985 Buick LeSabre Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Buick LeSabre is always ready to roll. We’re committed to providing you with everything you need to keep your LeSabre in top shape, all in one place. Start shopping confidently below for your 1985 Buick LeSabre!

Best-Selling Performance Exhaust Products for 1985 Buick LeSabres

Enhance the driving experience in your Buick with 1 quality Performance Exhaust Product components, starting at $34.99.

show more show less

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Most Popular 1985 Buick LeSabre Performance Fuel Systems

Customize your Buick with 5 Performance Fuel Systems products like Performance Carburetors, all priced under $699.99.

show more show less

from

$518.99

The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$499.99

Vibratory Polished For Good Looks

from

$682.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Street Ready; Out Of The Box

Top Picks for 1985 Buick LeSabre Performance Oil Filters

Upgrade Buick LeSabres with top-quality Performance Oil Filters parts, including 2 OEM and aftermarket selections for your 1985 model.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

In-Demand Performance Air Filters for 1985 Buick LeSabres

Select from 1 premium Performance Air Filters parts for your 1985 Buick LeSabre.

show more show less

from

$41.49

Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.

Product Features:

Designed to be superior to stock paper filters
Comes pre-oiled
Designed for an easy installation with OE fit
Made with pre-dyed media for lasting color

Most Sold 1985 Buick LeSabre Performance Engines

Explore our best-selling Buick parts for the 1985 LeSabre among 65 OEM and aftermarket options starting from $7.99.

show more show less

from

$29.99

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$29.49

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$31.99

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$230.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with stock guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$481.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed Idle to 5500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$471.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1421.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$899.99

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$749.99

3400-3800 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$742.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$678.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$665.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$579.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$449.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$416.99

Mag/Marine/Mag Muscle 230/230 Hydraulic Flat Cam/Lifter Kit Oldsmobile 260-455

from

$416.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring

from

$408.99

7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring

from

$405.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$402.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$401.99

16 Springs

from

$399.99

ENG ROCKER ARM KIT

Top-Rated Performance and Racing Products Brands For Your 1985 Buick LeSabre

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Buick LeSabres. Below you’ll find some of our best rated Performance and Racing Products from K&N, Energy Suspension, and B & M, and more. Performance and Racing Products from these brands that fit a 1985 LeSabre start at just $9.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1985 Buick LeSabre Performance and Racing Products

When it comes to maintaining or upgrading your 1985 Buick LeSabre, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1985 Buick LeSabre. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 96 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(49)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Perfect.”

from $17.99

(47)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Good filter that I use regularly”

Popular Energy Suspension 1985 Buick LeSabre Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Buick LeSabre owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1985 LeSabre, Advance Auto Parts carries a full inventory of 3 Energy Suspension Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $29.99, plus, with more than 12 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $11.99

(2)

Control Arm Bump Stop Set

“good quality part”

from $29.99

(7)

High Performance Sway Bar End Link Kit with Hardware

“A +++++++++++++++”

from $9.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

FAQs for 1985 Buick LeSabre Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1985 Buick LeSabres?

Out of 131 Performance and Racing Products that fit 1985 Buick LeSabres, the following parts are the top sellers:

High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
High Performance Thermostat – 160 Degree Brass & Copper (17360031) – $29.49
High Performance Sway Bar End Link Kit with Hardware (16360004) – $29.99

What’s the price range for 1985 Buick LeSabre Performance and Racing Products?

Performance and Racing Product prices for the 1985 Buick LeSabre start at $7.99 and go up to $1,421.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1985 Buick LeSabre?

The average price for Performance and Racing Products for the 1985 Buick LeSabre is $230.69. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Buick LeSabre model years?

Yes, we currently carry Performance and Racing Products for 45 model years of Buick LeSabres between 1959 and 2005. Performance and Racing Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Performance and Racing Products for my 1985 Buick LeSabre?

The cheapest 1985 Buick LeSabre Performance and Racing Products we carry in stock are:

Flat 1 Piece Guide Plate for Olds 350-455 with 5/16" Pushrod and 5/16" Stud (50288914) – $7.99
High Energy 8.500" Long, 5/16" Diameter Pushrod (50289696) – $7.99
High Energy 8.234" Long, 5/16" Diameter Pushrod (50289288) – $7.99
Tie Rod Dust Boot (17360821) – $9.99
Tie Rod Dust Boot (22906874) – $9.99

What are the top-rated Performance and Racing Products that fit the 1985 Buick LeSabre?

Out of 981 reviews by customers, our 1985 Buick LeSabre Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1985 Buick LeSabre and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120014) – $17.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120000) – $17.99
Performance Air Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120014) – $17.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120000) – $17.99
Performance Steering Products
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120014) – $17.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120000) – $17.99

What types of Performance and Racing Products do you sell for my 1985 Buick LeSabre?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1985 Buick LeSabre:

Can I get help with 1985 Buick LeSabre Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.

What is your return policy for Buick LeSabre Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Buick LeSabre Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Buick LeSabre Performance and Racing Products

Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam (Part No.42-601-5)

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Spectre – Water Neck; Olds (Part No.4733)

Accel – Supercoil (Part No.140001)

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Accel – Cap/Rotor (Part No.8129)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

B & M – SHIFT IMPROVER HP (Part No.35265)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)

Energy Suspension – Control Arm Bushing Set (Part No.3.3169R)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

Energy Suspension – Motor Mount (Part No.3.1116G)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

Hurst – Automatic Shifter, Quarter Stick (Part No.3160006)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Competition Cams – ALUMINUM GOLD ROCKER ARMS, SBC 1 ST (Part No.19001-16)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885273)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5900)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2006)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

Spectre – Spectre Replacement Air Filter (Part No.HPR0326)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Spectre – Water Neck; Olds (Part No.4733)

Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)

Edelbrock – Performer Small Block Oldsmobile 350 Intake Manifold (Part No.7111)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-600-5)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam K-Kit (Part No.K42-222-4)

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam K-Kit (Part No.K42-600-5)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit (Part No.K42-223-4)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam K-Kit (Part No.K42-308-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam K-Kit (Part No.K42-229-4)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-224-4)

Competition Cams – Mag/Marine/Mag Muscle 230/230 Hydraulic Flat Cam/Lifter Kit Oldsmobile 260-455 (Part No.CL42-231-4)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-225-4)

Competition Cams – 7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring (Part No.743-100)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-308-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL42-229-4)

Competition Cams – 16 Springs (Part No.26995-16)

Competition Cams – ENG ROCKER ARM KIT (Part No.1441-KIT)