1985 BMW 635CSi Steering and Chassis Parts
More 1985 BMW 635CSi Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1985 BMW 635CSi, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1985 BMW 635CSi Steering and Chassis Parts
Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)
from
$83.15
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
- Comes with bolts and washers (where applicable)
- Easy to install
- Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
Febi – Sway Bar Bushing (Part No.L1050237744FEB)
from
$4.88
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Pressure Hose Assembly (Part No.37775)
from
$63.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
ST Suspensions – Susp Stbzr Bar Kit (Part No.52020)
from
$595.99
Susp Stbzr Bar Kit
Lemfoerder – Lemfoerder Idler Arm (Part No.M302046367LEM)
from
$31.42
The Lemfoerder Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
APA/URO Parts – Idler Arm (Part No.M3025442577APA)
from
$39.49
The APA/URO Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The APA/URO idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
Lemfoerder – Lemfoerder Pitman Arm (Part No.M3025442577LEM)
from
$65.02
The Lemfoerder Pitman Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder Pitman arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
Carquest Premium – Bulk – 1/2" I.D. Reservoir Hose (Part No.36209)
from
$43.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 1/2 in I.D. Reservoir Hose (sold by foot) (Part No.34997)
from
$6.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
Product Features:
See More
Product Features:
- PLEASE NOTE: Priced and sold by the foot. See store for details.
- Rated at 275 Deg. F
- Inner Diameter: 1/2″
Rare Parts – Center Link (Part No.RP26473)
from
$132.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Forged steel
- Heat treated components
- Improves steering response
Rare Parts – Sway Bar Link (Part No.RP18255)
from
$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – Sway Bar Link Kit (Part No.DW-K90107)
from
$21.99
Driveworks chassis parts help to provide powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Also cover plate design allows for tighter tolerances vs. traditional cover plate designs, providing a more durable and extended life part. An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit.
Product Features:
See More
Product Features:
- Gas Shielded Welding Reinforcement ensure the safety of driving under bad road condition
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Rare Parts – Tie Rod Assembly (Part No.RP27808)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M3000458777LEM)
from
$68.48
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Dorman – Suspension Control Arm (Part No.520-729)
from
$77.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Control Arm with Ball Joint (Part No.RP10429)
from
$169.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP10428)
from
$169.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Idler Arm Repair Kit (Part No.RP20832)
from
$162.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Improves steering response
National – Multi Purpose Seal (Part No.222820)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Powercraft – Pump Seal Kit (Part No.8841)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Popular 1985 BMW 635CSi Steering and Chassis Parts Categories
1985 BMW 635CSi Steering and Chassis Parts
You count on your 1985 BMW 635CSi to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 38 Steering and Chassis Parts ranging in price from $1.59 to $595.99, you’re sure to find everything you need for your 1985 BMW 635CSi.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Cardone, Carquest Premium, and CRP. 1985 BMW 635CSi Steering and Chassis Parts start as low as $1.59!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 63 extensive product reviews on 1985 BMW 635CSi Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1985 BMW 635CSi below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1985 BMW 635CSi
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 BMW 635CSi running right for years to come. In our inventory you’ll find brands like Cardone, Carquest Premium, CRP, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Sway Bars. All are waiting to get your 1985 BMW 635CSi back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1985 BMW 635CSi, and some of our most reviewed Cardone parts include:
FAQs for 1985 BMW 635CSi Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1985 BMW 635CSi?
Out of 38 Steering and Chassis Parts for the 1985 BMW 635CSi, the most popular in our inventory are:
from
$6.99
This product is not rated
Bulk – 1/2 in I.D. Reservoir Hose (sold by foot)
Power Steering Return Hoses
