1984 Volkswagen Vanagon Fluids

Pennzoil Ultra Platinum Full Synthetic 5W-30 motor oil is our most advanced formulation with unbeatable wear and sludge protection, as well as unbeatable cleanliness. When it comes to torturous driving conditions, trust the unbeatable engine protection of Pennzoil Ultra Platinum. It far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6); it offers outstanding performance in extreme temperatures and better fuel economy (based on the latest industry standard) Pennzoil Ultra Platinum helps extend the life of your engine and protects for up to 20 years or 750,000 miles, whichever comes first, to give you peace of mind to drive every mile as hard as you can, from your daily commute to sand dunes and mountain terrain (Based on Sequence IVA wear test; Sequence IIIH oxidation and deposit test; and the Sequence VH sludge test. Pennzoil Ultra Platinum Lubrication Limited Warranty: Up to 20 years or 750,000 miles, whichever comes first, if you exclusively use Pennzoil Ultra Platinum Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.) Volume: 5 quarts.

Pennzoil Platinum Full Synthetic 10W-30 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.) Volume: 5 quarts.

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Mobil 1 High Mileage motor oil utilizes our signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles of all ages. Specialty components in synthetic oil extend engine life by reducing the friction that causes deposits and sludge buildup – keeping critical engine parts clean and protected for up to 15,000 miles between oil changes.(1) Mobil 1 High Mileage motor oil meets ILSAC GF-7 standards, offering superior oxidation control, enhanced protection against pre-ignition and timing chain wear, and excellent cold-start and low-temperature performance. Mobil 1 is the No. 1 selling motor oil in America at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR(R). Volume: 1 quart.

High Performance 75W-90 Full Synthetic Gear Oil is engineered to deliver exceptional transmission performance under demanding conditions. Its fully synthetic composition ensures excellent viscosity and temperature stability, providing reliable lubrication across a wide range of operating environments. Designed with outstanding seal compatibility and high pressure-absorption capability, this gear oil reduces gearshift resistance for smoother transitions and minimizes transmission noise for a quieter driving experience. The advanced formula offers excellent wear resistance and corrosion protection, safeguarding your transmission components against aging and breakdown. With superior shear stability and friction behavior, it maintains consistent performance while resisting viscosity breakdown, ensuring optimal shift quality in all conditions. Ideal for a variety of manual transmissions, this 1-liter gear oil is a durable and high-value solution for enhancing your vehicle’s efficiency and longevity.

Prestone Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Prestone MAX European Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Prestone Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Idemitsu Power Steering Fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.Idemitsu Premium PSF can be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Complete Synthetic Power Steering Fluid formulated for use in American, European and Asian Vehicels. Electric Power Steering Fluid Compatible.

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2. Volume: 1 quart.

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4. Volume: 1 quart.

Autran Syn-295 Synthetic Transmission Fluid is a premium full-synthetic solution designed for heavy-duty automatic transmissions, meeting the rigorous Allison TES-295 and TES-468 standards. Engineered with high-viscosity index synthetic base fluids and advanced additives, it delivers exceptional wear protection, superior high and low-temperature performance, and outstanding shear stability. This fluid keeps transmissions cooler, resists oxidation, and offers excellent corrosion and foaming resistance, ensuring long-lasting reliability even under extreme operating conditions. Compatible with a wide range of OEM systems, including Allison C-4, Voith, and ZF transmissions, it is ideal for light-duty applications such as buses, emergency vehicles, delivery trucks, motor homes, and more. Whether for on- or off-highway use, this 1-gallon solution provides unmatched durability and performance, making it a trusted choice for demanding environments. Volume: 1 gallon.

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Prestone DOT 5.1 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards and is designed to handle the most extreme braking situations. Prestone DOT 5.1 is a high performance formula for extreme braking situations like racing. Formulated to protect against overheating and brake fade with a formula that exceeds DOT standards. This synthetic extended life fluid starts with higher dry boiling point vs. DOT standard protecting against performance decline due to water absorption. This formula is safe to use in all DOT 5.1 braking systems, ABS, disc or drum, and can mix with any DOT 5.1 fluid. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.

Prestone DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.