1984 Toyota Pickup Drivetrains
More 1984 Toyota Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1984 Toyota Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1984 Toyota Pickup Drivetrains
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut (Part No.41212)
from
$135.99
Product Features:
See More
- Conversion kit
- Fits Toyota V6 rear with 29 spline pinion
- Includes yoke , pinion seal, and pinion nut
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)
from
$315.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.
Product Features:
See More
Product Features:
- Fits Toyota V6 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$115.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
Milemarker – Hub Conversion Kit (Part No.95-29918)
Dorman – Rear Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.936-788)
from
$1119.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: Greaseable, Adjustable, OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R11RMK)
from
$155.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- TOYOTA 8″ BRNG & SEAL MASTER KIT
Yukon Gear – Differential (Part No.26051)
from
$782.99
Differential
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota In A Ratio (Part No.24652)
from
$436.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Toyota V6 rear
- 5.29 ratio
- 29 spline pinion
- Includes conversion yoke, seal, and pinion nut
Dorman – Rear axle shaft kit for Toyota pickup (Part No.630-335)
from
$343.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.
Product Features:
See More
Product Features:
- Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
- Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
- Durable construction – designed to rigorous standards and tested to ensure performance
- Trustworthy solution – backed by team of engineers and quality control specialists in the United States
Yukon Gear – 8" Roll Pin, Solid (Part No.33412)
Yukon Gear – 8" Cross Pin Shaft, Standard Open (Part No.33413)
Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)
from
$506.99
8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .
Product Features:
See More
Product Features:
- Fits Toyota Landcruiser reverse rotation front
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
National – Multi Purpose Seal (Part No.224810)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 8" Front Straight Axle Inner Seal & Some Land Cruiser (Part No.30325)
from
$21.99
8″ front straight axle inner seal & some Land Cruiser (fits inside knuckl.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits Toyota 8″ front
Yukon Gear – Spindle Nut Kit For Toyota Front (Part No.33513)
Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – Axle Bearing Puller Tool (Part No.56065)
from
$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.
Product Features:
See More
Product Features:
- Axle bearing puller
- Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
- Works on Toyota rear applications
National – Bearings (Part No.15245)
from
$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.390)
from
$34.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
National – Bearings (Part No.32307)
from
$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Carrier Case, Toyota 8" 4 Cylinder (Part No.20113)
from
$208.99
8″ standard Open case, bare.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Toyota 8″ with 4 cylinder engine
Dorman – Spindle Nut M20-1.5 Hex Size 30mm (sold by each) (Part No.615-102)
from
$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$1.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)
from
$10.99
V6 standard Open pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Toyota V6
Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)
from
$7.99
8″ standard Open pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Toyota 8″ with 4 cylinder engine
Popular 1984 Toyota Pickup Drivetrains Categories
1984 Toyota Pickup Drivetrains
You count on your 1984 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 189 Drivetrains ranging in price from $1.99 to $1,324.99, you’re sure to find everything you need for your 1984 Toyota Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like DriveWorks, National, and Idemitsu. 1984 Toyota Pickup Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 756 extensive product reviews on 1984 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.5 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1984 Toyota Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1984 Toyota Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Toyota Pickup running right for years to come. In our inventory you’ll find brands like DriveWorks, National, Idemitsu, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1984 Toyota Pickup back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 1984 Toyota Pickup, and some of our most reviewed Driveworks parts include:
FAQs for 1984 Toyota Pickup Drivetrains
What are the most purchased Drivetrains for the 1984 Toyota Pickup?
Out of 189 Drivetrains for the 1984 Toyota Pickup, the most popular in our inventory are:
What are the top-rated 1984 Toyota Pickup Drivetrains?
Top-rated Drivetrains for your 1984 Toyota Pickup based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
