1984 Toyota Pickup Drivetrains
More 1984 Toyota Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1984 Toyota Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1984 Toyota Pickup Drivetrains
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Driveworks – Differential Seal (Part No.S-710419)
Dorman – Rear axle shaft kit for Toyota pickup (Part No.630-335)
from
$343.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.
Product Features:
See More
Product Features:
- Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
- Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
- Durable construction – designed to rigorous standards and tested to ensure performance
- Trustworthy solution – backed by team of engineers and quality control specialists in the United States
Yukon Gear – Ring Gear Bolt (Part No.33060)
from
$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Product Features:
See More
Product Features:
- Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
- 11mm x 1.0
Dorman – Rear Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.936-788)
from
$1119.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Rear Driveshaft Assembly
- Rear Drive Shaft: Greaseable, Adjustable, OE Fix
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)
from
$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″
- 23 spline
National – Bearings (Part No.JLM104948)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Brute Force – Universal Joint (Part No.1-1612BF)
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
National – Bearings (Part No.KC-11445-Y)
from
$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Part No.615-109.1)
from
$9.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
USA Standard Gear – Master Overhaul Kit for Toyota 7.5" IFS Differential, V6 (Part No.37110)
from
$344.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. .
Product Features:
See More
Product Features:
- Fits reverse rotation Toyota 7.5″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
Driveworks – Tapered Roller Bearing (Part No.S-30306)
Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)
Yukon Gear – Axle Bearing Puller Tool (Part No.56065)
from
$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.
Product Features:
See More
Product Features:
- Axle bearing puller
- Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
- Works on Toyota rear applications
Milemarker – Hub Conversion Kit (Part No.95-29918)
Yukon Gear – Master Overhaul Kit For Toyota 7.5" IFS Differential, V6 (Part No.14116)
from
$369.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable),thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes side seals, but no side shims.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″ with V6 engine
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Dorman – Driveshaft Center Support Bearing (Part No.934-710)
from
$137.99
This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
- Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Zip Locker Switch (Part No.34015)
National – Bearings (Part No.32307)
from
$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)
from
$55.99
Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1982 and down Toyota Landcruiser
- 27 spline
Rugged Ridge – Locking Hub (Part No.15001.21)
from
$244.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
National – Multi Purpose Seal (Part No.224810)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Gear Install Kit (Part No.TOYIKIFS)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Differential Pinion (Part No.13111)
from
$289.99
Differential Pinion
Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (V6 Only) (Part No.13087)
from
$338.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota 7.5″ with 6 cylinder engine
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Popular 1984 Toyota Pickup Drivetrains Categories
1984 Toyota Pickup Drivetrains
You count on your 1984 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 174 Drivetrains ranging in price from $2.29 to $977.99, you’re sure to find everything you need for your 1984 Toyota Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, National, and Moog. 1984 Toyota Pickup Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,630 extensive product reviews on 1984 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Bearings with 4.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1984 Toyota Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1984 Toyota Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Toyota Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, National, Moog, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1984 Toyota Pickup back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1984 Toyota Pickup, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1984 Toyota Pickup Drivetrains
What are the most purchased Drivetrains for the 1984 Toyota Pickup?
Out of 174 Drivetrains for the 1984 Toyota Pickup, the most popular in our inventory are:
What are the top-rated 1984 Toyota Pickup Drivetrains?
Top-rated Drivetrains for your 1984 Toyota Pickup based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
