1984 Toyota Land Cruiser Steering and Chassis Parts
More 1984 Toyota Land Cruiser Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1984 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1984 Toyota Land Cruiser Steering and Chassis Parts
Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010174492SNK)
from
$69.38
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Carquest Premium – SWAY BAR BUSHING (Part No.224-96821)
from
$33.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Rein – Power Steering Suction Hose (Part No.PSH0395)
from
$26.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- A direct fit, replacement hose with clamps
- OE quality, braided rubber compound hose
- Pre attached protective jacket(s) and heat sleeve(s), where required
- Ensures proper operation of the power steering system
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$33.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8770)
from
$79.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8748)
from
$94.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)
from
$36.99
3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.
Product Features:
See More
Product Features:
- Heavy-duty power steering oil cooler
- Size: 3/4″ x 5″ x 9-1/4″
- For vehicle with 3/8″ ID power steering return hose
- Removes destructive heat and helps prolong power steering system life
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Carquest Premium – Pressure Hose Assembly (Part No.35880)
from
$89.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.37804)
from
$172.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Restrictor helps absorb vibration and reduce noise
Whiteline – Sway Bar Link Bushing (Part No.W21014)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Nishino – Sway Bar Link Bushing (Part No.L1031232922NSO)
from
$1.99
The Nishino Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Yukon Gear – Toyota ’79-’85 Hilux And ’75-’90 Landcruiser Knuckle Kit (Part No.32054)
from
$214.99
’79-’85 Hilux and ’75-’90 Landcruiser Knucle kit (2 sides) with bearings, seals, and Wipers. This kit includes high quality Nachi bearings.
Product Features:
See More
Product Features:
- Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
- Includes bearings, seals and wipers
- Services both sides
Powercraft – Heavy Duty Cylinder Seal Kit (Part No.8931)
from
$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8827)
from
$40.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Monroe – Magnum Steering Damper (Part No.SC2916)
from
$58.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.
Product Features:
See More
Product Features:
- 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
- All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
- Micro-Cellular Gas Design Allows unit to be mounted horizontally.
- Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
- Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Rare Parts – Sway Bar Link Kit (Part No.RP15644)
from
$14.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
MOOG – Stabilizer Bar Link Kit (Part No.K700772)
from
$23.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Cardone – Power Steering Filter (Part No.20-0012F)
from
$41.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$26.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – 5/8 in I.D. Reservoir Hose (Sold by the foot) (Part No.34998)
from
$9.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Rated at 275 Deg. F
- Inside Diameter: 5/8″
- Shape: Straight
- Outside Diameter: 0.91 in
- Priced and sold by the foot. See Store for details.
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
National – Bearings (Part No.30303)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1984 Toyota Land Cruiser Steering and Chassis Parts Categories
1984 Toyota Land Cruiser Steering and Chassis Parts
You count on your 1984 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 27 Steering and Chassis Parts ranging in price from $1.82 to $214.99, you’re sure to find everything you need for your 1984 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Imperial, Carquest Premium, and Cardone. 1984 Toyota Land Cruiser Steering and Chassis Parts start as low as $1.82!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 264 extensive product reviews on 1984 Toyota Land Cruiser Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars and Power Steering Filter with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1984 Toyota Land Cruiser below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1984 Toyota Land Cruiser
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Energy Suspension Steering and Chassis Parts
You’ll find popular Energy Suspension brand products across Tie Rods. All are waiting to get your 1984 Toyota Land Cruiser back on the road. Some of the top-rated Energy Suspension products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1984 Toyota Land Cruiser, and some of our most reviewed Imperial parts include:
FAQs for 1984 Toyota Land Cruiser Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1984 Toyota Land Cruiser?
Out of 27 Steering and Chassis Parts for the 1984 Toyota Land Cruiser, the most popular in our inventory are:
from
$5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
from
$2.49
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Reservoir Hoses
What are the top-rated 1984 Toyota Land Cruiser Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1984 Toyota Land Cruiser based on customer reviews/ratings are:
from
$42.99
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
