1984 Porsche 911 Cooling and Climate Controls
More 1984 Porsche 911 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1984 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1984 Porsche 911 Cooling and Climate Controls
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
APA/URO Parts – Blower Motor (Part No.R203133859APA)
from
$155.07
APA/URO manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct Fit Replacement.
- High quality OE electrical components.
- OE quality brushes and bearings.
- Balanced rotor assembly.
Dansk – Heater Valve (Part No.R302022615DSK)
from
$395.26
Heater Valve
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – A/C Block Expansion Valve (Part No.T39519)
from
$47.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Behr – BEHR A/C Condenser (Part No.R103022706BEH)
from
$419.31
BEHR manufactures an OE-equivalent direct fit A/C Condenser that guarantees the same high quality, fit and performance of the OEM A/C condenser it replaces. BEHR produces brazed flat-tube condensers, delivering high power in spite of their small package size. This ensures rapid cooling of the vehicle cabin, thanks to optimum matching of heat transfer and pressure drop on the coolant side and air side.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Advanced technology parallel flow, sub cool and serpentine design.
- Provides the fit, quality and performance of the original equipment.
- compliant for both R12 and R134A refrigerants.
Dansk – Blower Motor (Part No.R203125158DSK)
from
$247.71
Blower Motor
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Elring – Water Pump Gasket (Part No.G3040238887ELR)
from
$9.38
Water Pump Gasket
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Original Equipment – Heater Control Swive (Part No.R3075947699OEA)
from
$2.60
Heater Control Swive
National – Bearings (Part No.206-FF)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Elring – SEAL RING – COPPER (Part No.4M20011240ELR)
from
$1.24
SEAL RING – COPPER
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Original Equipment – Heater Valve Cable (Part No.R201754110OEA)
from
$23.79
Heater Valve Cable
Carquest Premium – Coolant Temperature Sensor with Washer (Part No.WTC1833)
from
$42.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2168)
from
$31.49
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T33592)
from
$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
KAI – A/C Receiver Drier (Part No.ACM010160)
from
$15.99
New Standard Replacement A/C Receiver Drier
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Ranco – Air Conditioning Temperature Switch (Part No.R1055132743RAN)
from
$81.77
Air Conditioning Temperature Switch
APA/URO Parts – Cooling Fan Pulley (Part No.G505232699APA)
from
$83.55
Cooling Fan Pulley
Original Equipment – Heater Cable (Part No.R3048669078OEA)
from
$21.92
Heater Cable
Behr – Oil Thermostat (Part No.A633034380BEH)
from
$228.42
Oil Thermostat
Mahle – Oil Thermostat (Part No.A633097561MAH)
from
$514.77
Oil Thermostat
Popular 1984 Porsche 911 Cooling and Climate Controls Categories
1984 Porsche 911 Cooling and Climate Controls
You count on your 1984 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 30 Cooling and Climate Controls ranging in price from $0.99 to $613.74, you’re sure to find everything you need for your 1984 Porsche 911.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 13 different brands like Permatex, Factory Air, and Dorman. 1984 Porsche 911 Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 403 extensive product reviews on 1984 Porsche 911 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Bearings with 2.3 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1984 Porsche 911 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1984 Porsche 911
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Porsche 911 running right for years to come. In our inventory you’ll find brands like Permatex, Factory Air, Dorman, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1984 Porsche 911 back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1984 Porsche 911, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1984 Porsche 911 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1984 Porsche 911?
Out of 30 Cooling and Climate Controls for the 1984 Porsche 911, the most popular in our inventory are:
What are the top-rated 1984 Porsche 911 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1984 Porsche 911 based on customer reviews/ratings are:
from
$17.99
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
