1984 Mazda GLC Brake Parts

Essential 1984 Mazda GLC Brake Parts

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15064)

Disc Brake Caliper Repair Kit

from

$5.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38126)

Brake Hydraulic Hose

from

$14.49
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-1942)

Remanufactured Brake Master Cylinder

from

$45.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD132)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5204)

Vacuum Brake Booster: Without Master Cylinder

from

$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5520)

Vacuum Brake Booster: Without Master Cylinder

from

$111.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5221)

Vacuum Brake Booster: Without Master Cylinder

from

$82.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5223)

Vacuum Brake Booster: Without Master Cylinder

from

$99.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

1984 Mazda GLC Brake Parts

You count on your 1984 Mazda GLC to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 6 Brake Parts ranging in price from $5.99 to $111.99, you’re sure to find everything you need for your 1984 Mazda GLC.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 4 different brands like Cardone, Economy, and Wearever. 1984 Mazda GLC Brake Parts start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 1984 Mazda GLC Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1984 Mazda GLC below to get started!

Top-Rated Brake Parts Brands For Your 1984 Mazda GLC

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Mazda GLC running right for years to come. In our inventory you’ll find brands like Cardone, Economy, Wearever, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1984 Mazda GLC back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders