1984 Mazda 626 Brake Parts
More 1984 Mazda 626 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1984 Mazda 626, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1984 Mazda 626 Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38969)
from
$22.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA380125)
from
$23.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380124)
from
$28.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38207)
from
$37.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Wearever – WHEEL CYLINDER (Part No.WCA37787)
from
$20.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
- Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
- Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Carquest Wearever – Wheel Cylinder (Part No.WCA37547)
from
$14.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Wheel Cylinder (Part No.WCA37575)
from
$19.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37546)
from
$14.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Parking Brake Cable (Part No.BCA660379)
from
$35.49
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
- Quality design – inner cables are sheathed and lubricated to provide improved durability
- Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
- Tough materials – zinc-plated fittings prevent corrosion
Carquest Wearever – Parking Brake Cable (Part No.BCA93389)
from
$18.79
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
- Quality design – inner cables are sheathed and lubricated to provide improved durability
- Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
- Tough materials – zinc-plated fittings prevent corrosion
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2527)
from
$98.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2015)
from
$96.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5110)
from
$99.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2754)
from
$138.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74622)
from
$87.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2000)
from
$134.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74621)
from
$90.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Popular 1984 Mazda 626 Brake Parts Categories
1984 Mazda 626 Brake Parts
You count on your 1984 Mazda 626 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 6 Brake Parts ranging in price from $14.49 to $134.99, you’re sure to find everything you need for your 1984 Mazda 626.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 3 different brands like Cardone, Carquest, and Wearever. 1984 Mazda 626 Brake Parts start as low as $14.49!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 20 extensive product reviews on 1984 Mazda 626 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1984 Mazda 626 below to get started!
Top-Rated Brake Parts Brands For Your 1984 Mazda 626
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Mazda 626 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Wearever, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1984 Mazda 626 back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1984 Mazda 626 Brake Parts
What are the most purchased Brake Parts for the 1984 Mazda 626?
Out of 6 Brake Parts for the 1984 Mazda 626, the most popular in our inventory are:
from
$134.99
This product is not rated
Vacuum Brake Booster: Without Master Cylinder
Power Brake Boosters
