1984 Jeep CJ7 Differentials

Product Features:

• Cover gasket
• Fits Dana Spicer 30

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

• Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

• Includes three quarts of conventional oil

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

• Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

• Includes three quarts of Redline Shockproof oil

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

• Includes four quarts of Redline Shockproof oil

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Product Features:

• 27 spline inner and outer
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

Yukon front 4340 Chrome-Moly replacement axle kit for ’82-’86 Dana 30 Jeep CJ with 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Yukon Superjoints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 27 spline inner and outer
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Product Features:

• 27 spline inner and outer
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Yukon front 4340 Chrome-Moly replacement axle kit for ’82-’86 Dana 30 Jeep CJ with 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Dana U/joint. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 27 spline inner and outer
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

One piece, long axles for ’82-’86 Model 20 CJ7 & CJ8 with bearings and 29 splines, kit. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects. These axles will not work with an Auburn Ected or a factory Powr Lok posi with two piece side gears.

Product Features:

• Rear axle kit
• Fits 1982-1986 Jeep CJ7 and CJ8 with AMC Model 20 rear
• 29 spline
• Replaces stock two piece axles with upgraded one piece design
• Includes two axles, axle bearings and seals, axle retainers, axle studs and silicone

Yukon 4340 Chrome-Moly left hand inner replacement axle for Dana 30, ’82-’86 Jeep CJ with a length of 28.69 and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 27 spline
• 28.69″ long
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Left hand inner
• 5-760X U-joint size
• 4340 Chromoly

Yukon 4340 Chrome-Moly right hand inner replacement axle for Dana 30, ’82-’86 Jeep CJ with a length of 15.82 and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 27 spline
• 15.82″ long
• Fits Dana Spicer 30 in 1982-1986 Jeep CJ
• Right hand inner
• 5-760X U-joint size
• 4340 Chromoly

Yukon 1541H alloy right hand rear axle for Model 20 (long set) with a length of 28 3/8″ and 29 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects. This axle will not work with an Auburn Ected or a factory Powr Lok posi with two piece side gears.

Product Features:

• 29 spline
• 28 3/8″ long
• Fits AMC Model 20 in 1982-1986 CJ7
• One piece axle
• Right hand side

Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.

Product Features:

• Left Driver Side
• OE Style
• Direct Fit

Yukon 1541H alloy left hand rear axle for Model 20 (long set) with a length of 25.295″ and 29 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects. This axle will not work with an Auburn Ected or a factory Powr Lok posi with two piece side gears.

Product Features:

• 29 spline
• 25.295″ long
• Fits AMC Model 20 in 1982-1986 CJ7
• One piece axle
• Left hand side

Yukon 1541H alloy 2 piece left hand short axle for Model 20 (’82-’86 CJ7) with a length of 28-5/8″ inches long and 29 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects.

Product Features:

• 29 spline
• 28 5/8″ long
• Fits AMC Model 20 in 1982-1986 CJ7
• Two piece axle
• Left hand side
• Does not include hub

Yukon 1541H alloy 2 piece right hand short axle for Model 20 (’82-’86 CJ7) with a length of 31-5/8″ inches long and 29 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects.

Product Features:

• 29 spline
• 31 5/8″ long
• Fits AMC Model 20 in 1982-1986 CJ7
• Two piece axle
• Right hand side
• Does not include hub

Yukon Two piece axle hub for Model 20. fits stock type axle. Yukon hubs come with a 1 year warranty against manufacturing defects.

Product Features:

• Fits AMC Model 20 in CJ5 and CJ7
• Hub

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Product Features:

• Fits standard rotation Dana Spicer 30
• Chrome

Finned Polished aluminum cover for AMC Model 20.

Product Features:

• Fits AMC Model 20
• Finned polished aluminum

Differential

Product Features:

• Fits standard rotation Dana Spicer 30
• Finned polished aluminum

Product Features:

• Fits standard rotation Dana Spicer 30
• Steel

Chrome cover for AMC Model 20.

Product Features:

• Fits AMC Model 20
• Chrome