1984 International F5070 Shocks and Struts
More 1984 International F5070 Shocks and Struts
Find your specific 1984 International F5070 original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1984 International F5070 Shocks and Struts
Monroe – Magnum Shock Absorber (Part No.65103)
from
$111.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Monroe – Magnum Shock Absorber (Part No.74025)
from
$113.99
Tough Monroe® Magnum shock absorbers for transit buses deliver a firm, controlled ride for greater stability and increased driver comfort. Designed to meet or exceed demanding OE manufacturer specifications
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 1-3/4-inch (44.6 mm) Bore Larger bore gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control
- 2-3/4-inch (69.85 mm) Reserve Tube More fluid for more consistent performance – when required
- .05-inch Pressure tube withstanding pressure of 9KPSI
- All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- Single-lip, low-friction oil seal
Bulldog HD – Heavy-Duty Shock Absorber – 2001-2010 Freightliner Classic (Part No.HD1215-0029)
from
$73.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.65407)
from
$121.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
Popular 1984 International F5070 Shocks and Struts Categories
1984 International F5070 Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 1984 International F5070. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 4 different Shocks and Struts in our inventory ranging from $73.99 to $121.99. That means you can find the exact parts or products you need to keep that 1984 International F5070 running smoothly.
Shocks and Struts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1984 International F5070. Monroe and Bulldog HD are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 1984 International F5070, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Shocks and Struts to keep your 1984 International F5070 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 1984 International F5070 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 International F5070 demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your F5070 the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
FAQs for 1984 International F5070 Shocks and Struts
What are the most purchased Shocks and Struts for the 1984 International F5070?
Out of 4 Shocks and Struts for the 1984 International F5070, the most popular in our inventory are:
from
$73.99
This product is not rated
Heavy-Duty Shock Absorber – 2001-2010 Freightliner Classic
Front Shock and Struts
