1984 Ford Ranger Ignition Coils and Boots

Essential 1984 Ford Ranger Ignition Coils and Boots

NGK – Spark Plug Wire Set (Part No.52092)

Spark Plug Wire Set

from

$79.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-6160)

Spark Plug Wire Set

from

$35.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

DENSO – Coil On Plug Boots-4 (Part No.671-4283)

Coil On Plug Boots-4

from

$36.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Prestolite – Prestolite Ignition Wire Set (Part No.F1020129901PST)

Prestolite Ignition Wire Set

from

$70.79
The Prestolite carbon core wire set is resistant to fuels, oils and other under-hood chemicals and utilizes a stainless steel or zinc-plated steel for optimum strength, electrical conductivity, and corrosion resistance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • OE style connectors.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed. The Prestolite Ignition Wire Set features identical fit, function, color, and performance to OE.
See More

JBA Performance – W06349 Ignition Wires 97-00 Ranger/Explorer 4.0L OHV Blue (Part No.W06349)

W06349 Ignition Wires 97-00 Ranger/Explorer 4.0L OHV Blue

from

$92.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W06349 Ignition Wires 97-00 Ranger/Explorer 4.0L OHV Blue
  • Extra thick diameters for improved under hood appearance
See More

NGK – Spark Plug Wire Set (Part No.52004)

Spark Plug Wire Set

from

$106.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

JBA Performance – W06479 Ignition Wires 98-00 Ranger 3.0L Blue (Part No.W06479)

W06479 Ignition Wires 98-00 Ranger 3.0L Blue

from

$139.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W06479 Ignition Wires 98-00 Ranger 3.0L Blue
  • Extra thick diameters for improved under hood appearance
See More

Motorcraft – Motorcraft Ignition Wire Set (Part No.F1020208201MTR)

Motorcraft Ignition Wire Set

from

$74.30
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:
  • OEM quality
  • OEM connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Reduces the chance of misfire
  • Increases engine life
  • Protects against wire set failure
See More

JBA Performance – W06469 Ignition Wires 91-94 Ranger 3.0L Blue (Part No.W06469)

W06469 Ignition Wires 91-94 Ranger 3.0L Blue

from

$92.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W06469 Ignition Wires 91-94 Ranger 3.0L Blue
  • Extra thick diameters for improved under hood appearance
See More

Motorcraft – Central Ignition Coil (Part No.F3000422812MTR)

Central Ignition Coil

from

$120.91
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:
  • Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
  • Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
  • Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
  • Radio-Frequency Interference (RFI) Suppression
  • Magnets hold strength for the coil to maintain proper energy output
  • Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
  • Coil Housing is engineered to withstand extremes in temperature without cracking
See More

Driveworks – Ignition Coil (Part No.26324)

Ignition Coil

from

$89.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBE1834)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$78.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1829)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$37.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6101)

Original Equipment Quality Direct Ignition Coil

from

$69.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

MSD Ignition – Ignition Coil (Part No.8227)

Ignition Coil

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for Ford TFI coil
  • 85:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48806)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$98.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest – Ignition Coil (Part No.E71)

Ignition Coil

from

$21.05
BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
  • High temperature enameled wires were specified for better insulation and performance
  • The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Accel – Coil:Ford 6-Tower Dis Hrzntl (Part No.140035)

Coil:Ford 6-Tower Dis Hrzntl

from

$133.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, optimized winding, resistance and turns ratios to deliver 10-15% more energy than OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct replacements for OEM coils. Must use factory firing order. Bodies and/or secondary towers molded in ACCEL yellow with brass secondary contacts.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • OBD II Compatible Safe
  • Standard Motor Products SMP Fd-480
See More

Dorman – Ignition Coil Connector (Part No.645-302)

Ignition Coil Connector

from

$52.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Ignition Coil Connector (Part No.PT753)

Ignition Coil Connector

from

$17.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1082)

Ignition Coil Connector

from

$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1175)

Ignition Coil Connector

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA3099)

Ignition Coil Connector

from

$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1146)

Engine Camshaft Position Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C Pressure Transducer Connector (Part No.PTA1151)

A/C Pressure Transducer Connector

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

1984 Ford Ranger Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 1984 Ford Ranger. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 13 different Ignition Coils and Boots in our inventory ranging from $17.05 to $101.99. That means you can find the exact parts or products you need to keep that 1984 Ford Ranger running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Ford Ranger. Carquest Premium, Accel, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 1984 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 41 reviews in this category, some of the top rated parts include Ignition Coil with 3.7 stars and Spark Plug Wire Set with 1.0 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1984 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 1984 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coil Connectors categories, plus more. For a 1984 Ford Ranger, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil Connector
from $17.05
(2)
Ignition Coil Connector
Ignition Coil Connectors

Top 1984 Ford Ranger Ignition Coils and Boots from Driveworks

Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 1984 Ford Ranger. Popular Driveworks parts include:
Electronic Ignition Coil
from $36.05
(14)
Electronic Ignition Coil
Ignition Coils

FAQs for 1984 Ford Ranger Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1984 Ford Ranger?

Out of 13 Ignition Coils and Boots for the 1984 Ford Ranger, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $37.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
8Mm Super Stock Spiral Uni Rd
from $101.99
(11)
8Mm Super Stock Spiral Uni Rd
Ignition Coil Boots
Ignition Coil: Meets OE Specifications, 1 Count
from $36.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils

What are the top-rated 1984 Ford Ranger Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 1984 Ford Ranger based on customer reviews/ratings are:
Ignition Coil
from $71.99
(3)
Ignition Coil
“I purchased the MSD Performance coil to upgrade the original factory coil. It was a perfect fit for my 1993 F-150 SVT Lightning! I immediately noticed”
Spark Plug Wire Set
from $35.99
(1)
Spark Plug Wire Set
“Terminals will not stay on cap. some wires are too short and can not be put in original wire looms . Read the box , made in china , these are JUNK. I ”