1984 Ford E-350 Econoline Catalytic Converters

Essential 1984 Ford E-350 Econoline Catalytic Converters

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23101)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$516.99
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23101 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1996 Ford E-150 Econoline, 1996 Ford E-350 Econoline Club Wagon, and more, this direct-fit catalytic converter also interchanges with OE parts F4TZ-5E212-B and F6UZ-5F250-NB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15041)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$278.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.334015)

California Grade CARB Compliant Universal Catalytic Converter

from

$182.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 334015 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.334005)

California Grade CARB Compliant Universal Catalytic Converter

from

$190.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 334005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15042)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$167.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94007)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$124.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.447254)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1148.99
MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447254 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1996 Ford E-150 Econoline and 1996 Ford E-350 Econoline, this direct-fit catalytic converter also interchanges with OE part F6UZ-5F250-AJB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94016)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.333007)

California Grade CARB Compliant Universal Catalytic Converter

from

$394.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 333007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93301)

Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$424.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93301 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1984-1986 Ford F-150, 1984-1986 Ford F-250, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83403)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$539.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.55321)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$643.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 55321. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2002 Ford E-250 Econoline, 2000-2004 Ford E-350 Super Duty, and more, this direct-fit catalytic converter also interchanges with OE parts 1C2Z-5E212-CA and 2C2Z-5E212-FA, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.93516)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$164.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93516 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447176)

California Grade CARB Compliant Universal Catalytic Converter

from

$478.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447176 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.334006)

California Grade CARB Compliant Universal Catalytic Converter

from

$202.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 334006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15142)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$511.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.55300)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$525.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 55300 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15762)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$749.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Standard® direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

Walker – Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed (Part No.93239)

Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed

from

$202.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.445300)

California Grade CARB Compliant Universal Catalytic Converter

from

$1053.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445300 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15838)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$837.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Standard® direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBD vehicles, 1995 and older. Not legal for sale or use in CA, CO & NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54437)

Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed

from

$869.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447206)

California Grade CARB Compliant Universal Catalytic Converter

from

$390.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93316)

Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$474.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93316 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1985-1987 Ford E-350 Econoline, 1985-1987 Ford E-350 Econoline Club Wagon, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15022)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$239.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

Walker – Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed (Part No.93303)

Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed

from

$447.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51007)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$352.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

1984 Ford E-350 Econoline Catalytic Converters

Maybe you’re in the middle of a full rebuild of that 1984 Ford E-350 Econoline. Maybe you just need a couple of Catalytic Converters. Either way, Advance Auto Parts has 12 different Catalytic Converters in our inventory ranging from $124.99 to $424.99. That means you can find the exact parts or products you need to keep that 1984 Ford E-350 Econoline running smoothly.

Catalytic Converters are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Ford E-350 Econoline. Walker and Magnaflow are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Catalytic Converters for your 1984 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 15 reviews in this category, some of the top rated parts include Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 1.0 stars.

So if you’re in the market for aftermarket Catalytic Converters to keep your 1984 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Catalytic Converters Brands To Make Your 1984 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Catalytic Converters make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Catalytic Converters brands and parts.

FAQs for 1984 Ford E-350 Econoline Catalytic Converters

What are the most purchased Catalytic Converters for the 1984 Ford E-350 Econoline?

Out of 12 Catalytic Converters for the 1984 Ford E-350 Econoline, the most popular in our inventory are:
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
from $271.99
This product is not rated
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
Catalytic Converters
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
from $126.99
This product is not rated
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
California Grade CARB Compliant Universal Catalytic Converter
from $182.99
This product is not rated
California Grade CARB Compliant Universal Catalytic Converter
Catalytic Converters

What are the top-rated 1984 Ford E-350 Econoline Catalytic Converters?

Top-rated Catalytic Converters for your 1984 Ford E-350 Econoline based on customer reviews/ratings are:
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
from $124.99
(1)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
“on thecat, the manufacture says its covered for 24 months, advances sYS 90 DAYS, fEDERAL GOV SAYS 5 UYEARS, sO WHO’S LYING”