1984 Dodge Omni Power Steering Parts

Essential 1984 Dodge Omni Power Steering Parts

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Lares – Remanufactured Power Steering Pump (Part No.2237)

Remanufactured Power Steering Pump

from

$111.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Cardone – Power Steering Pump (Part No.20-863)

Power Steering Pump

from

$61.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8570)

Rack Pinion Seal Kit

from

$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Lower Pinion Bearing Kit (Part No.8579)

Lower Pinion Bearing Kit

from

$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Return Hose Assembly (Part No.37433)

Return Hose Assembly

from

$60.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)

Bulk - 3/8" I.D. Return Hose J189

from

$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36197)

Bulk - 3/8" I.D. Return Hose J189

from

$52.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

MOOG – Rack and Pinion Mount Bushing (Part No.K7113)

Rack and Pinion Mount Bushing

from

$13.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – R & P Mounting Bushing (Part No.RP15934)

R & P Mounting Bushing

from

$19.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Insulates Rack & Pinion from Frame.
  • Stabilizes Rack & Pinion
See More

National – Bearings (Part No.LM29749)

Bearings

from

$13.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Cardone – Rack and Pinion Assembly (Part No.22-303A)

Rack and Pinion Assembly

from

$150.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.22-303)

Rack and Pinion Assembly

from

$140.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Rare Parts – R & P Mounting Bushing (Part No.RP15936)

R & P Mounting Bushing

from

$18.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Insulates Rack & Pinion from Frame.
  • Stabilizes Rack & Pinion
See More

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8610)

Rack Pinion Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8576)

Rack Pinion Seal Kit

from

$69.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26551)

Rack & Pinion Bellows

from

$50.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Driveworks – Bellow Kits (Part No.DW-K6298)

Bellow Kits

from

$12.49
Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response a

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26548)

Rack & Pinion Bellows

from

$40.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Carquest Premium – Pressure Hose Assembly (Part No.36684)

Pressure Hose Assembly

from

$129.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

1984 Dodge Omni Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 1984 Dodge Omni. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 37 different Power Steering Parts in our inventory ranging from $2.99 to $177.99. That means you can find the exact parts or products you need to keep that 1984 Dodge Omni running smoothly.

Power Steering Parts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Dodge Omni. Imperial, Driveworks, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 1984 Dodge Omni, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,348 reviews in this category, some of the top rated parts include Bellow Kits with 4.1 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 1984 Dodge Omni rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 1984 Dodge Omni Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Dodge Omni demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Omni the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Rare Parts Power Steering Parts

We carry Rare Parts parts in our stock across Rack and Pinion Mounts categories, plus more. For a 1984 Dodge Omni, our most popular Rare Parts Power Steering Parts include:
R & P Mounting Bushing
from $18.49
(1)
R & P Mounting Bushing
Rack and Pinion Mounts

Top 1984 Dodge Omni Power Steering Parts from Imperial

Imperial products are another trusted brand when it comes to Power Steering Parts for your 1984 Dodge Omni. Popular Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1984 Dodge Omni Power Steering Parts

What are the most purchased Power Steering Parts for the 1984 Dodge Omni?

Out of 37 Power Steering Parts for the 1984 Dodge Omni, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(70)
Taper Bearing Set
Pinion Bearings
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

What are the top-rated 1984 Dodge Omni Power Steering Parts?

Top-rated Power Steering Parts for your 1984 Dodge Omni based on customer reviews/ratings are:
Bellow Kits
from $12.49
(18)
Bellow Kits
“Perfect”
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”