1984 Dodge Charger Engine Cooling Parts

Essential 1984 Dodge Charger Engine Cooling Parts

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-14227-00)

Engine Coolant Thermostat Housing Gasket

from

$14.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Application specific design provides an exceptional fit.
  • Validated for fit, form, and function.
See More

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14358)

Standard Thermostat: 180 Degrees

from

$19.79
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-526)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$204.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1383)

Multi Purpose Relay

from

$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Imperial – 16" Electric Fan (Part No.226216)

16" Electric Fan

from

$115.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Thin-line electric fan
  • 16″ diameter
  • 1,400 CFM
  • Use as a pusher or puller fan
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.58-645)

Water Pump: New, Installation Gasket Included

from

$65.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:
  • 100% Factory tested for leakage and dimensional precision
  • Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
  • Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
  • Assembled with new, high-quality unitized shaft seals to prevent premature leakage
  • Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
See More

Crown Auto Jeep Replacmnt – Oem Replacement (Part No.52079799AA)

Oem Replacement

from

$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85107)

Coolant Housing/Water Outlet: Gasket Included

from

$15.79
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Coolant Housing/Water Outlet (Part No.85341)

Coolant Housing/Water Outlet

from

$29.49
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Direct-fit replacement for ease of installation
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35840)

Engine Coolant Thermostat Housing Gasket

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – Engine Coolant Thermostat Gasket (Part No.G4031216102MAH)

Engine Coolant Thermostat Gasket

from

$18.11
The Mahle Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Beck/Arnley – Thermostat Gasket (Part No.039-0081)

Thermostat Gasket

from

$2.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber or composite material designed to withstand high heat conditions
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

FAE – Engine Coolant Temperature Sensor (Part No.C6020175789FAE)

Engine Coolant Temperature Sensor

from

$37.01
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1252)

Temperature Sender With Gauge

from

$4.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Temperature Sender With Gauge and Thread Sealant (Part No.WTC1129)

Temperature Sender With Gauge and Thread Sealant

from

$67.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0094)

Engine Coolant Temperature Sensor

from

$33.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Dorman – Help – Radiator Drain Cocks (Part No.61121)

Radiator Drain Cocks

from

$7.49
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Dorman – Help – Drain Cock-Brass-1/4 In. NPT (Part No.61106)

Drain Cock-Brass-1/4 In. NPT

from

$5.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

KAI – Radiator (Part No.RAD2767)

Radiator

from

$125.99
New Platinum Pro Radiator, 2.7/3.5/5.7/6.1 Liter Engines, Automatic Transmission, 1 Row Core, Heavy Duty Cooling

Product Features:
  • 2.7/3.5/5.7/6.1 Liter Engines, Automatic Transmission, 1 Row Core, Heavy Duty Cooling, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metrix – Radiator (Part No.G1000218900MTX)

Radiator

from

$140.58
Plastic Tank / Aluminum Core Radiator METRIX OE Style Aluminum Core Radiators are guaranteed to match the exact specifications as the factory installed radiator. METRIX provides an OE quality part that will fit the same as the original manufacturer’s product with no need to drill holes, move fittings, or stretch hoses. All METRIX radiators, tanks, cores, dimensions and materials meet the vehicle manufacturer’s strict OE standards and are required to pass rigorous performance and durability tests. METRIX radiators are packaged with all necessary accessories for a successful install, including cooler fittings, fan shroud clips, and mounting brackets.

Product Features:
  • OE Quality – Higher quality and reliable performance compared to competitive products
  • Exact fit – No additional time consuming steps needed for installation
  • OE Engineered – Lightweight and improved engine cooling performance
  • Aluminum Core – Advanced design for optimum heat transfer
  • Oil Cooler – Integrated OE design for efficient thermal management
See More

DENSO – First Time Fit Radiator: Reliable Performance and OE-Quality Construction (Part No.G1000923053ND)

First Time Fit Radiator: Reliable Performance and OE-Quality Construction

from

$283.71
DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit? philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:
  • Fin Pitch – Superior fin waves provide a higher heat transfer.
  • Flow Configuration – Available in cross-flow and down-flow configurations.
  • Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.
See More

Felpro – Engine Water Pump Gasket (Part No.36071)

Engine Water Pump Gasket

from

$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Edelbrock – Engine Water Pump Gasket Set for Mopar Big/ Small-Block (Part No.7257)

Engine Water Pump Gasket Set for Mopar Big/ Small-Block

from

$14.99
Edelbrock #7257 Engine Water Pump Gasket Set Mopar Big/Small Block. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materia

Product Features:
  • Composite Material
  • 1-Pump To Block
  • 1-Water Pump To Timing Cover
  • For Big & Small Block Chrysler
  • Compatible W/ Part #8814, 8824, 8877, 8887
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

1984 Dodge Charger Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1984 Dodge Charger. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 33 different Engine Cooling Parts in our inventory ranging from $2.29 to $329.99. That means you can find the exact parts or products you need to keep that 1984 Dodge Charger running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Dodge Charger. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1984 Dodge Charger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,262 reviews in this category, some of the top rated parts include Adjustable Thermostatic Fan Control with 3.4 stars and Thermocap Radiator Cap with 3.2 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1984 Dodge Charger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1984 Dodge Charger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Dodge Charger demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Charger the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Dorman – Help Engine Cooling Parts

We carry Dorman – Help parts in our stock across Radiator Drain Plugs categories, plus more. For a 1984 Dodge Charger, our most popular Dorman – Help Engine Cooling Parts include:
Radiator Drain Cocks
from $7.49
(2)
Radiator Drain Cocks
Radiator Drain Plugs

Top 1984 Dodge Charger Engine Cooling Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Engine Cooling Parts for your 1984 Dodge Charger. Popular Carquest Premium parts include:
Radiator Cap: 16 PSI
from $9.79
(260)
Radiator Cap: 16 PSI
Radiator Caps
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
Radiator Caps
Radiator: With Transmission Oil Cooler
from $329.99
(2)
Radiator: With Transmission Oil Cooler
Radiators

FAQs for 1984 Dodge Charger Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1984 Dodge Charger?

Out of 33 Engine Cooling Parts for the 1984 Dodge Charger, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
Radiator Fan Motors

What are the top-rated 1984 Dodge Charger Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1984 Dodge Charger based on customer reviews/ratings are:
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”
Thermocap Radiator Cap
from $47.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
Electric Fan - 10" Diameter
from $67.99
(14)
Electric Fan – 10" Diameter
“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”