1984 Chevrolet S10 Blazer Differentials

Essential 1984 Chevrolet S10 Blazer Differentials

Pro-King – Differential Bearing Cone (Part No.742G250)

Differential Bearing Cone

from

$14.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-124)

Rear Axle Shaft, Left or Right

from

$245.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

Motive Gear – Differential Pinion Nut (Part No.1260823)

Differential Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Motive Gear – Differential Spool (Part No.FS10-28)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 10 BOLT 8.5 28 SPL ST
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

    Differential Carrier Gear Kit

    from

    $176.99


    Product Features:
    • GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

    DIFFERENTIAL GASKET

    from

    $7.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Shaft Repair Sleeve (Part No.99128)

    Shaft Repair Sleeve

    from

    $41.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    USA Standard Gear – Pinion Installation Kit For ’82-’99 GM 7.5" & 7.625" (Part No.60010)

    Pinion Installation Kit For '82-'99 GM 7.5" & 7.625"

    from

    $127.99
    7.5″ & 7.625″ GM 82-99 PINION KIT .

    Product Features:
    • Fits 1982-1999 GM 7.5″ and 7.625″
    • Uses Koyo bearings and races
    • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
    See More

    National – Shaft Repair Sleeve (Part No.99138)

    Shaft Repair Sleeve

    from

    $27.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-411)

    Differential Ring and Pinion

    from

    $301.99


    Product Features:
    • GM 10BL 8.5 R/P 4.11 MG FRT/REAR
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

    RngPnnInstlKt

    from

    $43.99
    RngPnnInstlKt

    Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

    Differential Shaft Lock Bolt

    from

    $5.99
    This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
    • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Energy Suspension – Differential Carrier Bracket Bushing Set (Part No.3.1105G)

    Differential Carrier Bracket Bushing Set

    from

    $27.99
    Product Features:
    • Made of Superior Hyper-Flex+ Material
    See More

    Powertrax – Lock Right Locker (Part No.1931-LR)

    Lock Right Locker

    from

    $444.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Crush Sleeve (Part No.9785792)

    Differential Crush Sleeve

    from

    $2.69
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    National – Bearings (Part No.A-6)

    Bearings

    from

    $16.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    Dorman – Rear Differential Cover (Part No.697-701)

    Rear Differential Cover

    from

    $20.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    Pro-King – Differential Internal Nest Kit (Part No.741A717)

    Differential Internal Nest Kit

    from

    $184.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Motive Gear – Differential Super Bearing Kit – Timken (Part No.R7.5GRSKT)

    Differential Super Bearing Kit - Timken

    from

    $156.99


    Product Features:
    • SUPERKIT – GM*7.5*1982-98*TIMKIN* EXCEPT 1990-2002 ASTRO/SAFARI
    See More

    Motive Gear – Differential Pinion Seal (Part No.2043)

    Differential Pinion Seal

    from

    $3.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Motive Gear – Differential Carrier (Part No.GM8.6L)

    Differential Carrier

    from

    $221.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Powertrax – Grip LS Traction System (Part No.LS201030)

    Grip LS Traction System

    from

    $503.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Motive Gear – Differential Mini Spool (Part No.MS7.5-28)

    Differential Mini Spool

    from

    $101.99


    Product Features:
    • MINI SPOOL GM 7 1/2″ 28 SPLINE
    See More

    Motive Gear – Differential Mini Spool (Part No.MS7.5-26)

    Differential Mini Spool

    from

    $98.99
    Motive Gear Mini-Spools replace your stock spider and side gears with a solid billet mini-spool for 100% traction to both wheels. Not recommended for street applications.

    Product Features:
    • Billet construction
    • Not recommended for street applications
    • GM7.5″ MINI SPOOL 26 SPLINE
    See More

    1984 Chevrolet S10 Blazer Differentials

    Maybe you’re in the middle of a full rebuild of that 1984 Chevrolet S10 Blazer. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 131 different Differentials in our inventory ranging from $2.49 to $2,219.99. That means you can find the exact parts or products you need to keep that 1984 Chevrolet S10 Blazer running smoothly.

    Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1984 Chevrolet S10 Blazer. DriveWorks, National, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1984 Chevrolet S10 Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 996 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.5 stars and Differential Ring and Pinion with 4.5 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1984 Chevrolet S10 Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1984 Chevrolet S10 Blazer Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1984 Chevrolet S10 Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your S10 Blazer the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1984 Chevrolet S10 Blazer, our most popular Felpro Differentials include:
    DIFFERENTIAL GASKET
    from $7.99
    (45)
    DIFFERENTIAL GASKET
    Rear Differential Cover Gaskets

    Top 1984 Chevrolet S10 Blazer Differentials from Driveworks

    Driveworks products are another trusted brand when it comes to Differentials for your 1984 Chevrolet S10 Blazer. Popular Driveworks parts include:
    Taper Bearing Set
    from $10.29
    (70)
    Taper Bearing Set
    Differential Bearings

    FAQs for 1984 Chevrolet S10 Blazer Differentials

    What are the most purchased Differentials for the 1984 Chevrolet S10 Blazer?

    Out of 131 Differentials for the 1984 Chevrolet S10 Blazer, the most popular in our inventory are:
    Bearings
    from $16.99
    (25)
    Bearings
    Differential Bearings
    Bearings
    from $17.99
    (36)
    Bearings
    Differential Bearings
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    Differential Pinion Shaft Lock Bolts

    What are the top-rated 1984 Chevrolet S10 Blazer Differentials?

    Top-rated Differentials for your 1984 Chevrolet S10 Blazer based on customer reviews/ratings are:
    Rear Differential Cover
    from $20.99
    (38)
    Rear Differential Cover
    “Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
    Differential Ring and Pinion
    from $241.99
    (4)
    Differential Ring and Pinion
    “Perfect match and easy install”
    Multi Purpose Seal
    from $15.99
    (4)
    Multi Purpose Seal
    “Perfect”