1984 Chevrolet C30 Alternators and Starters
More 1984 Chevrolet C30 Alternators and Starters Categories
If you’re looking for an original Alternators and Starters replacement for a 1984 Chevrolet C30, you can search through our selection below. You’ll also find aftermarket and OEM Alternators and Starters to meet your needs.
Essential 1984 Chevrolet C30 Alternators and Starters
Mr. Gasket – Chrome Low Mount Alternator Bracket – Small Block Chevy – Dress Up Your Engine! (Part No.5179)
from
$72.39
Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.
Product Features:
See More
Product Features:
- Alternator Relocating Kit
- Heavy Gauge Chrome Plated Steel
- All Necessary Hardware Included
- Helps To Give Engine Compartment A Clean Look
- Designed To Work With Short Style Water Pump
- Possible Cross Member Interference On Some App
Carquest Standard – Starter Remanufactured Standard (Part No.3510MSV)
from
$62.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator Diode Trio (Part No.SCA1002)
from
$6.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest – Alternator Electrical Connector (Part No.PT68)
from
$4.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.MNJ-471-S)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Starter Brush (Part No.XAA1014)
from
$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Brush Set (Part No.X265)
from
$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Dorman – 4-Wire Voltage Regulator Module (Part No.85118)
from
$33.49
This voltage regulator connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this voltage regulator connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Voltage Regulator Connector (Part No.PTA1263)
from
$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Ignition Lock Cylinder (Part No.CS132L)
from
$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Ignition Lock Cylinder (Part No.CS59L)
from
$16.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Alternator: Remanufactured, 80 Amps (Part No.7135MA)
from
$147.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Alternator: Remanufactured, 78 Amps (Part No.7273-9A)
from
$93.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Starter Bushing (Part No.SBA5145)
from
$1.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Starter Bushing (Part No.SB0)
from
$3.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)
from
$7.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.
Product Features:
See More
Product Features:
- Conveniently available in various styles and in packs of different quantities
- High quality steel construction
- Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
- Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
Carquest Premium – Voltage Regulator (Part No.RAA1056)
from
$14.49
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications. By fully understanding how the alternator and the voltage regulator interact ensures that the CARQUEST volt
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest – Voltage Regulator (Part No.R291)
from
$28.99
Product Features:
See More
- Our Throttle Position Sensors maintain specific installed outputs to match OE rather than adjustable consolidated designs
- Circuits are printed on flexible polyimide film or ceramic-based substrates for excellent dimensional stability preventing electrical performance drift. Noble palladium/gold/platinum alloys provide low contact resistance for extended service life
- Each TPS uses integral rotor bearings and return springs for easy installation
- Each sensor undergoes rigorous end-of-line testing with thousands of data points to validate output voltages for optimum performance and trouble-free operation
Carquest Premium – Alternator Brush Set (Part No.XAA1042)
from
$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Alternator Brush Holder (Part No.XAC1063)
from
$15.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Bearings (Part No.305)
from
$40.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Needle Bearing (Part No.S-MNJ-471-S)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest – Starter Solenoid (Part No.84C1006)
from
$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Starter Solenoid (Part No.84C1005)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1039)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1008)
from
$31.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Popular 1984 Chevrolet C30 Alternators and Starters Categories
1984 Chevrolet C30 Alternators and Starters
You count on your 1984 Chevrolet C30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 74 Alternators and Starters ranging in price from $2.49 to $324.99, you’re sure to find everything you need for your 1984 Chevrolet C30.
Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 12 different brands like Carquest, Carquest Premium, and LOCKSmart. 1984 Chevrolet C30 Alternators and Starters start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 1,436 extensive product reviews on 1984 Chevrolet C30 Alternators and Starters. Some of the top-rated Alternators and Starters products we carry are Alternator: Remanufactured, 78 Amps with 4.3 stars and Alternator Electrical Connector with 4.9 stars.
Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 1984 Chevrolet C30 below to get started!
Top-Rated Alternators and Starters Brands For Your 1984 Chevrolet C30
Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Chevrolet C30 running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, LOCKSmart, and even more.
Popular Locksmart Alternators and Starters
You’ll find popular Locksmart brand products across Ignition Lock Parts. All are waiting to get your 1984 Chevrolet C30 back on the road. Some of the top-rated Locksmart products in these categories are:
Top-Rated Carquest Standard Alternators and Starters
If Carquest Standard are what you’re looking for, our inventory holds plenty. We stock Carquest Standard brand Alternators and Starters for your 1984 Chevrolet C30, and some of our most reviewed Carquest Standard parts include:
FAQs for 1984 Chevrolet C30 Alternators and Starters
What are the most purchased Alternators and Starters for the 1984 Chevrolet C30?
Out of 74 Alternators and Starters for the 1984 Chevrolet C30, the most popular in our inventory are:
What are the top-rated 1984 Chevrolet C30 Alternators and Starters?
Top-rated Alternators and Starters for your 1984 Chevrolet C30 based on customer reviews/ratings are:
from
$109.99
(15)
Alternator: Remanufactured, 78 Amps
“Was quick and easy pick up, install, and core return. Love the service at the Mount Joy, PA store.”
from
$89.99
(11)
Alternator: Remanufactured, 63 Amps
“Bought this due to bearings going out in old alternator(Squealed and wouldn’t charge all the time)! It was easy to install and at a great price! My ”
