1984 Cadillac Fleetwood Performance and Racing Products
Find Your Specific 1984 Cadillac Fleetwood Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1984 Fleetwood. Advance Auto Parts has popular Fleetwood parts like Performance Distributors, Performance Steering Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Fleetwood model years including
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996 and more. Select a category of 1984 Cadillac Fleetwood Performance and Racing Products below and start saving instantly.
Popular 1984 Cadillac Fleetwood Performance and Racing Products Categories
Essential Performance and Racing Products for 1984 Cadillac Fleetwoods
B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)
from
$511.99
A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.
Product Features:
See More
Product Features:
- High Perf. Friction Materials
- Complete Overhaul Gasket Set
- Modification Components
- Replacement Valves
- Replacement Springs
- Drain Plug Kit Included
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$33.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Premium quality wire harness and capacitor.
- Insure good connection and “static free” operation.
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)
from
$66.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
B & M – Automatic Shifter, Street Bandit Shifter (Part No.80797)
from
$869.99
The ultimate shifter for automatic transmission equipped street vehicles! The Hi-Tek Street bandit has all the same feature as the above Street Bandit line of shifters, with an interchangeable billet knob design.
Product Features:
See More
Product Features:
- Ideal For High-Tech Pro-Street
- Ideal For High-Tech Street Rods
- Narrow Styled Aluminum Housing
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Billet Aluminum Knob
- Can Be Used w/Reverse Pattern Valve Body
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$54.99
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
B & M – Aluminum Braided Dip Stick, Fits TH-400 Transmission (Part No.22166)
from
$127.99
What better way to check you oil level by using one of B&M’s transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission.
Product Features:
See More
Product Features:
- Automatic Transmission Dip Stick
B & M – Aluminum Braided Dip Stick, Fits TH-350 Transmission (Part No.22165)
from
$127.99
What better way to check you oil level by using one of B&M’s transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission.
Product Features:
See More
Product Features:
- Automatic Transmission Dip Stick
- Mounts to bellhousing
- Sold as a kit
- Natural finish
- Fits TH350 & TH350C
Richmond Gear – RngPnn (Part No.69-0324-1)
from
$350.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$88.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Richmond Gear – MiniSpool (Part No.78-7526-1)
from
$124.99
MiniSpool
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$166.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128G)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
B & M – Flexplate (Part No.20238)
from
$235.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1997 small block Chevy V8 engines (externally balanced) with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 inch bolt pattern, 153 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
B & M – Flexplate, 168 Tooth 86-94 Chevrolet Small Block (Part No.20239)
from
$213.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1994 GM (externally balanced) 4.3L V6 and GM small block V8 engines with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Mr. Gasket – Water Neck (Part No.2557)
from
$32.49
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with o-rings and mounting bolts
- Features an o-ring style seal to prevent water leaks
- Chrome plated
- 1/2″ NPT port can be used for various coolant temp related sensors or switches
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Energy Suspension – Control Arm Bushing Set (Part No.3.3113G)
from
$116.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Upgrade your 1984 Cadillac Fleetwood with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1984 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Performance and Racing Products for the 1984 Cadillac Fleetwood, designed to meet your needs without breaking the bank.
From
Performance Distributor
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1984 Cadillac Fleetwood at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $972.99, with
an average price of $319.08.
Our 57 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1984 Cadillac Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1984 Cadillac Fleetwood, we stock popular OEM and aftermarket Performance and Racing Products from top names
like PerTronix, B & M, Accel, and more.
PerTronix Performance and Racing Products
start at just $28.99 and boast an impressive 4.4 stars average rating from customers.
B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $102.99, and at an average 4.1 stars rating.
With 203 customer reviews and counting, our 1984 Cadillac Fleetwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1984 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1984 Cadillac Fleetwood!
Best-Selling Performance Distributors for 1984 Cadillac Fleetwoods
Enhance the driving experience in your Cadillac with 4 quality Performance Distributor components, starting at $17.49.
PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)
from
$28.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Precision machined chromoly weights and center plate.
- Designed to eliminate erratic timing.
- Includes three sets of springs.
- Complete installation instructions make recurving your distributor easy.
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$54.99
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$33.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Premium quality wire harness and capacitor.
- Insure good connection and “static free” operation.
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
Most Popular 1984 Cadillac Fleetwood Performance Steering Products
Customize your Cadillac with 3 Performance Steering Products products
like Performance Tie Rod End Boots, all
priced under $6.29.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Top Picks for 1984 Cadillac Fleetwood Performance Ignition Products
Upgrade Cadillac Fleetwoods with top-quality Performance Ignition Products parts, including 3 OEM and aftermarket selections for your 1984 model.
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$102.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$70.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
In-Demand Performance Suspension Products for 1984 Cadillac Fleetwoods
Select from 4 premium Performance Suspension Products parts for your 1984 Cadillac Fleetwood, with prices ranging from $10.49 to $116.99.
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128G)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Energy Suspension – Control Arm Bushing Set (Part No.3.3113G)
from
$116.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)
from
$66.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Most Sold 1984 Cadillac Fleetwood Performance Engines
Explore our best-selling Cadillac parts for the 1984 Fleetwood among 6 OEM and aftermarket options starting from $26.99.
B & M – Tork Master 3000 (Part No.20402)
from
$562.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$337.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Holeshot 3600 (Part No.20425)
from
$972.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Holeshot 3000 (Part No.20413)
from
$921.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Holeshot 2400 (Part No.20412)
from
$562.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Top-Rated Performance and Racing Products Brands For Your 1984 Cadillac Fleetwood
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1984 Cadillac Fleetwoods. Below you’ll find some of our best rated Performance and Racing Products from PerTronix, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1984 Fleetwood start at just $28.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular PerTronix 1984 Cadillac Fleetwood Performance and Racing Products
When it comes to maintaining or upgrading your 1984 Cadillac Fleetwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. PerTronix ticks all of those boxes. We offer a wide selection of PerTronix Performance and Racing Products, specifically designed for the 1984 Cadillac Fleetwood. With over 2 PerTronix brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $31.49. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our PerTronix Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$33.99
(1)
D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
“Works well, good quality harness!”
from
$28.99
(1)
D9001 Flame-Thrower Hei Distributor Advance Curve Kit
“This is a good product for a reasonable price”
Popular B & M 1984 Cadillac Fleetwood Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1984 Cadillac Fleetwood owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1984 Fleetwood, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $371.99 to $562.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$539.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
from
$371.99
(1)
Automatic Shifter, Sport Shifter
“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and
a knock out to drive.No down falls as far as I’m aw”
FAQs for 1984 Cadillac Fleetwood Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1984 Cadillac Fleetwoods?
Out of 57 Performance and Racing Products that fit 1984 Cadillac Fleetwoods, the following parts are the top sellers:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $102.99
What’s the price range for 1984 Cadillac Fleetwood Performance and Racing Products?
Performance and Racing Product prices for the 1984 Cadillac Fleetwood start at $5.99 and go up to $972.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1984 Cadillac Fleetwood?
The average price for Performance and Racing Products for the 1984 Cadillac Fleetwood is $319.08. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Fleetwood model years?
What are the cheapest Performance and Racing Products for my 1984 Cadillac Fleetwood?
The cheapest 1984 Cadillac Fleetwood Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
- Ball Joint Dust Boot Set (22906821) – $10.49
- Ball Joint Dust Boot Set (22906820) – $10.49
What are the top-rated Performance and Racing Products that fit the 1984 Cadillac Fleetwood?
Out of 203 reviews by customers, our 1984 Cadillac Fleetwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1984 Cadillac Fleetwood and their top-rated products:
- Performance Shifters
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Performance Steering Products
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Performance Drivetrains
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
What types of Performance and Racing Products do you sell for my 1984 Cadillac Fleetwood?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1984 Cadillac Fleetwood:
Can I get help with 1984 Cadillac Fleetwood Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac Fleetwood Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
