from

$6.29

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

from

$9.79

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$24.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$20.05

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

Each sensor has integrated Analog Digital (A/D) converter and digital signal processing with dynamically adaptive switch points improving accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom engineered magnetic circuit programming calibrates the sensor while performance testing improves timing accuracy between target wheel and sensor output
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$128.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$67.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$18.45

Bosch Duraterm Glow Plug Technology With a long history of diesel fuel injection expertise and innovation, Bosch leads the way in glow plug technology with its patented Duraterm dual-control coil design. This technology utilizes a self-regulating system that reduces glow wait time by more than 50%. The patented dual control regulating and heating coil system effectively directs current draw, enabling the glow plug to reach higher temperatures more quickly for faster engine start-up. For vehicles with a post-glow control system, this advanced technology results in a post-glow heating phase which allows for more efficient overall engine performance.

Product Features:

Glow plug reaches higher temperatures more quickly for fast engine start-up
Regulating coil controls current draw for rapid heat-up of heating coil
Heating coil provides rapid heat-up of the glow tube and quick start-up
Glow tube material resists corrosion and vibration for long service life
Fine-grained ceramic insulating powder provides superior electrical insulation and high thermal conductivity
Twin Viton seals protect coils from exhaust gas damage for long life
Connectors designed to OE specifications precise fit and easy installation

from

$11.49

Designed, tested and manufactured to original equipment standards, this high-quality, direct fit OE replacement glow plug offers exceptional quality. Features ultra-fast warm-up, unbeatable cold engine performance and reduced pollutant emissions.

Product Features:

11 Volt, 170 watt electrical rating
M10 x 1.00 thread
Ultra-fast warm-up
Unbeatable cold engine performance

from

$9.99

Diesel engines depend on the high heat of glow plugs to fire up from a cold start, and Autolite Glow Plugs shine with dependable power and exceptional quality. With the growing number of diesel trucks on the road today, the unsurpassed quality of Autolite Glow Plugs bring more value than ever.

Product Features:

Made to meet OE specifications
Dependable and long-lasting

from

$11.05

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$10.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.29

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

Superior Surface Finish
RFI Resistors (Asian) / RFI Suppression (European)
Installation Screws
Precision-machined Contacts
Finely -tooled Metal Mounting Sleeve (Asian)

from

$137.99

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$266.99

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$110.87

The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Resistant to high temperatures, corrosion and vibration.
Ignition noise suppressed.
Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required

from

$57.37

BERU ignition coils are developed vehicle-specific according to OEM requirements with or without built-in electronic modules and are manufactured using the latest computer-controlled technology.

Product Features:

High-precision ignition component
Meets or exceeds the OE specifications for durability and performance
Extremely temperature resistant
Radio-Frequency Interference (RFI) Suppression
Rational computer-controlled manufacturing techniques
High-tech quality based on zero-defect program
With or without electronics module depending on the vehicle type

from

$87.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$138.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$53.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$162.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$109.99

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$7.68

The task of the wire end plug is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.82

The task of the wire end plug is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features: