1983 Volkswagen Jetta Belts and Hoses
More 1983 Volkswagen Jetta Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1983 Volkswagen Jetta, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1983 Volkswagen Jetta Belts and Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 8 Inch Length (Part No.88377)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Rein – Heater Hose (Part No.CHH0529)
from
$59.99
Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Aftermarket – Hose – Water (Part No.4L10036086AFT)
from
$5.45
Hose – Water
Dorman – Help – Carburetor Pre-Heater Hose – 1-9/16 In. X 21 In. – Paper/ Aluminum (Part No.96038)
from
$7.49
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – Radiator Hose (Part No.CHR0602)
from
$122.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Rein – Radiator Hose (Part No.CHR0732)
from
$89.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.25" Diameter (Part No.D72318)
from
$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Kayser – Booster Vacuum Hose (Part No.N4020266381KAY)
from
$89.30
Booster Vacuum Hose
Kayser – Booster Vacuum Hose (Part No.N4020445225KAY)
from
$92.95
Booster Vacuum Hose
Kayser – Booster Vacuum Hose (Part No.N4020187859KAY)
from
$76.62
Booster Vacuum Hose
Original Equipment – Molded Radiator Hose (Part No.G2000183460OEA)
from
$106.28
The Original Equipment radiator hose is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OEM-Equivalent
- Inner linings are resistant to electrochemical cracking
- High strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
Original Equipment – Molded Radiator Hose (Part No.G2000538519OEA)
from
$50.72
The Original Equipment radiator hose is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OEM-Equivalent
- Inner linings are resistant to electrochemical cracking
- High strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
Dayco – Molded Radiator and Bypass Hose (Part No.G2000120752DAY)
from
$11.02
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
Product Features:
See More
Product Features:
- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
- Limited Three Year Warranty
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100062495MBL)
from
$27.06
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100020801MBL)
from
$19.38
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Driveworks – Automotive V-Belt (Part No.34013)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.25" Diameter (Part No.B70797)
from
$14.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6" Long, 1.25" Diameter (Part No.B72010)
from
$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Rein – Radiator Hose (Part No.CHR0299R)
from
$12.49
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Dayco – Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (Part No.81041)
from
$14.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Vaico – Oil Cooler Hose (Part No.A620028383VCO)
from
$5.98
Oil Cooler Hose
Meyle – Oil Cooler Hose (Part No.A6200123979MEY)
from
$42.17
Oil Cooler Hose
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$486.90
Hose – Fuel
CRP – Hose – Fuel (Part No.4L30010809CRP)
from
$233.30
Hose – Fuel
ContiTech – Diesel Injection Hose (Part No.D103024165CON)
from
$20.37
ContiTech develop and produce complete line systems from the tank through to the engine. The systems comply are cost-efficient and easy-to-install. ContiTech special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. The product range includes supply and return lines and ventilation lines.
Product Features:
See More
Product Features:
- OE Quality
- Good AdBlue resistance
- Safe and reliable
CRP – Fuel Hose (Part No.E5000859948CRP)
from
$107.08
Fuel Hose
Popular 1983 Volkswagen Jetta Belts and Hoses Categories
1983 Volkswagen Jetta Belts and Hoses
You count on your 1983 Volkswagen Jetta to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 59 Belts and Hoses ranging in price from $1.49 to $596.98, you’re sure to find everything you need for your 1983 Volkswagen Jetta.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 11 different brands like Dayco, Imperial, and Dorman. 1983 Volkswagen Jetta Belts and Hoses start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 102 extensive product reviews on 1983 Volkswagen Jetta Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.25" Diameter with 4.0 stars and V-Belt, Top Cog with 4.0 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1983 Volkswagen Jetta below to get started!
Top-Rated Belts and Hoses Brands For Your 1983 Volkswagen Jetta
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Volkswagen Jetta running right for years to come. In our inventory you’ll find brands like Dayco, Imperial, Dorman, and even more.
Popular Dayco Belts and Hoses
You’ll find popular Dayco brand products across Engine Cooling Hoses and Serpentine and V Belts. All are waiting to get your 1983 Volkswagen Jetta back on the road. Some of the top-rated Dayco products in these categories are:
from
$14.29
(1)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.25" Diameter
Lower Radiator Hoses
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1983 Volkswagen Jetta, and some of our most reviewed Dayco parts include:
from
$14.99
(8)
Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia.
Lower Radiator Hoses
from
$14.99
(4)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.13" Long, 1.25" Diameter
Coolant Hoses
FAQs for 1983 Volkswagen Jetta Belts and Hoses
What are the most purchased Belts and Hoses for the 1983 Volkswagen Jetta?
Out of 59 Belts and Hoses for the 1983 Volkswagen Jetta, the most popular in our inventory are:
What are the top-rated 1983 Volkswagen Jetta Belts and Hoses?
Top-rated Belts and Hoses for your 1983 Volkswagen Jetta based on customer reviews/ratings are:
from
$12.99
(2)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.25" Diameter
“The comment above says you have to cut it. That’s right. IT SAYS CUT TO FIT. There’s no problem cutting a little off, Come on what ever happen to a li”
