1983 Toyota Starlet Oil and Lubricants

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
• Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
• Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)

Castrol EDGE Euro Car 5W-30 A3/B4 Full-Synthetic Motor Oil transforms under pressure increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. Formulated for latest technology, high output engines that operate at extreme temperatures this fluid covers European OEM gasoline specifications for BMW, Mercedes-Benz, Porsche and VW/Audi.

Product Features:

• Optimized to deliver 40% better performance than required by ACEA standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets API CF/SL, ACEA A3/B4, BMW LL 01, Meets Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, VW 502 00/505 00

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.

Product Features:

• Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
• Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
• Engineered for greater protection against thermal breakdown
• Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
• Made in the usa
• Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories. 

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• 1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs

FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.

Product Features:

• Resists breakdown in severe engine environments
• Effectively prevents the formation of sludge and varnish deposits
• Reduces engine wear
• Turbo approved
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

CASTROL EDGE High Mileage 5W-30 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology that provides 10X better high-temperature performance and 6X better wear protection. The oil is designed with Phosphorus Replacement Technology that preserves the catalytic converter and the emission system. It meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and other OEM specifications. Castrol EDGE High Mileage is a full synthetic motor oil that offers superior performance and protection for high mileage engines. It is available in different grades, including 5W-20, 5W-30, and 10W-30. Try Castrol EDGE High Mileage today and extend the life of your engine.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c961-a1 and wss-m2c946-b1, meets engine test requirements of chrysler ms 6395 and 13340
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets ILSAC GF-6 specs

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage with Fluid TITANIUM Technology is designed to provide maximum performance for high mileage cars, even in extreme temperatures.
• Protects Catalytic Converter: Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus, protecting the catalytic converter and preserving the life of your emission system.