1983 Toyota Pickup Drivetrains
More 1983 Toyota Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1983 Toyota Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1983 Toyota Pickup Drivetrains
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.56 Ratio (Part No.24622)
from
$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
- 4.56 ratio
- 29 spline pinion
Yukon Gear – 8" Roll Pin, Solid (Part No.33412)
National – Bearings (Part No.30306)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Pinion Shim Kit (Part No.1109)
Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)
from
$55.99
Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1982 and down Toyota Landcruiser
- 27 spline
Driveworks – Universal Joint (Part No.DW-387)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Part No.615-109.1)
from
$9.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)
from
$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″
- 23 spline
Milemarker – Hub Conversion Kit (Part No.95-29918)
Yukon Gear – Pinion Nut (Part No.33156)
from
$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Product Features:
See More
Product Features:
- Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
- 20mm x 1.5 thread
- 30mm socket
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)
from
$10.99
V6 standard Open pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Toyota V6
Yukon Gear – 7.5" IFS Axle Side Seal (Part No.30327)
from
$14.99
7.5″ IFS axle side seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front stub axle seal
- Fits standard rotation Toyota 7.5″
Felpro – Differential Carrier Gasket (Part No.RDS 55430)
from
$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Motive Gear – Differential Crush Sleeve (Part No.3121)
Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)
from
$19.99
Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.56 Ratio (Part No.24645)
from
$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
- 4.56 ratio
- 29 spline pinion
- Includes conversion yoke, seal, and pinion nut
Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (V6 Only) (Part No.13087)
from
$338.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota 7.5″ with 6 cylinder engine
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Bearing Race Driver (Part No.56004)
from
$99.99
Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30025 race
- All steel construction
Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)
from
$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).
Product Features:
See More
Product Features:
- Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
- 5 needed
Yukon Gear – Standard Open Spider Gear Kit For Toyota 8" 4 Cylinder With 30 Spline Axles (Part No.16062)
from
$258.99
Yukon standard open spider gear kit for Toyota 8″ 4-cylinder with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Toytoa 8″ 4 cylinder open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
NTN – Differential Pinion (Part No.J7020164790NTN)
from
$120.81
Differential Pinion
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
USA Standard Gear – Standard Spider Gear Set For Toyota 8", 4 Cylinder (Part No.39031)
from
$204.99
Product Features:
See More
- Spider gear kit
- Fits Toyota 8″ with 4 cylinder engine
- Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – T8 30Spline Axle (24.64" – 29.08" Cut2Lth) 4340 – 106Mm Brake Pilot (Part No.21724)
from
$274.99
T8 30spline axle ’86-00 (24.64″ – 29.08″ CUT2LTH) 4340.
Product Features:
See More
Product Features:
- Fits 1979-2000 Toyota 8″ and V6 rear
- 4340 Chromoly
- 30 spline
- 29 1/8″ long
- Cut to length design fits 26.62″-29.26″ applications
- 106mm brake pilot
National – Multi Purpose Seal (Part No.224810)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 1983 Toyota Pickup Drivetrains Categories
1983 Toyota Pickup Drivetrains
You count on your 1983 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 170 Drivetrains ranging in price from $2.29 to $959.99, you’re sure to find everything you need for your 1983 Toyota Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, National, and Moog. 1983 Toyota Pickup Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,614 extensive product reviews on 1983 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Bearings with 4.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1983 Toyota Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1983 Toyota Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Toyota Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, National, Moog, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1983 Toyota Pickup back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1983 Toyota Pickup Drivetrains
What are the most purchased Drivetrains for the 1983 Toyota Pickup?
Out of 170 Drivetrains for the 1983 Toyota Pickup, the most popular in our inventory are:
What are the top-rated 1983 Toyota Pickup Drivetrains?
Top-rated Drivetrains for your 1983 Toyota Pickup based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
