1983 Pontiac Bonneville Performance and Racing Products

Name: Bolt Kit Intake Hex Head
Brand: Spectre
SKU: 4652
Price: 9.99 USD

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1983 Bonneville. Advance Auto Parts has popular Bonneville parts like Performance Oil Filters, Performance Fuel Systems, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Bonneville model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1983 Pontiac Bonneville Performance and Racing Products below and start saving instantly.

Popular 1983 Pontiac Bonneville Performance and Racing Products Categories

Performance Oil Filters

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Fuel Pumps

Performance Air Filters

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Transmission Dipstick Tubes

Performance Valve Covers

Performance Body Mounts

Performance Water Outlet Gaskets

Performance Engine Dress-Up Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Water Outlets

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Engine Harmonic Balancers

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Clutch Pressure Plate and Disc Sets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Oil Pans

Performance Timing Covers and Tabs

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Exhaust Header Hardware

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Brake Bleeders

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Ball Joint Boots

Performance Engine Camshaft Thrust Buttons

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Performance Engine Valve Stem Seal Sets

Performance Alternator or Generators

Performance Fuel Pump Pushrods

Essential Performance and Racing Products for 1983 Pontiac Bonnevilles

from

$9.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$44.99

Product Features:

Replacement Gasket Set For PN[4242]

from

$311.99

The Mr. Gasket chrome alternator is a high-performance, remanufactured solution designed to exceed original equipment specifications, ensuring maximum dependability for your vehicle. With an 80-amp output and a sleek chrome-plated finish, this GM 10SI style alternator is both functional and visually appealing. It fits most 1973-1983 GM vehicles, making it a versatile replacement option. The alternator features a 6.6″ bolt spacing, an internal regulator for efficient voltage control, and a 1-groove V-belt pulley included for easy installation. Operating at 12 volts, it can be used as a direct OE replacement or as a 1-wire alternator, offering flexibility to suit your needs. Built for durability and reliability, this alternator is an excellent choice for restoring or upgrading your vehicle’s electrical system.

Product Features:

Fits Most 1973-1983 GM Vehicles
Bolt Spacing 6.6″
80 Amps
GM 10SI Style Alternator
Chrome Plated Finish
1-Groove V-belt pulley – included
Internal Regulator

from

$379.99

The COMP Cams Three-Piece Billet Aluminum Timing Cover for Small Block Chevrolet engines allows access to the camshaft timing adjustments without having to remove the harmonic damper or disturb the oil pan seal. Designed to be lightweight yet rigid, this billet cover offers convenience and performance in one easy-to-install package.

Product Features:

Allows access to the camshaft timing adjustments without having to remove the harmonic damper or disturb the oil pan seal
Lightweight yet rigid
Easy to install
For Small Block Chevrolet applications

from

$527.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Use w/Reverse Pattern Valve Body
Includes Neutral Safety Switch
Includes Backup Light Switch

from

$40.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$29.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$170.99

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:

Thicker Than Stock Steel Plate
Ring Gear Securely Welded
Dual Bolt Patterns
Zinc-Dichromate Plated To Resist Corrosion
Withstands High Torque and RPM

from

$20.99

Roller cam lobes are ground flat rather than tapered like a flat tappet cam; it is necessary to provide some means of holding the cam back to the rear of the engine. The thrust button rides between the front of the timing gear and the back of the front cover and can be shimmed for proper end play of the cam. COMP Cams has both the solid nylon button and the roller thrust bearing available for the ultimate in performance.

Product Features:

.795″ Length
Ride between the front of the timing gear and the back of the timing cover
Can be shimmed to achieve proper endplay
Solid nylon and roller thrust bearing styles available

from

$87.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$65.99

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:

See catalog for application information
Features 60K V Rated Alkyd Compound

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$104.99

Chrome plated stamped steel valve covers have a flat smooth top, with internal baffles. Tall-style cover provides extra valve train clearance. Sold as a pair.

Product Features:

Tall-style covers provide extra clearance
Fits Pontiac 301-455 engines
Sold as a pair
Chrome plated steel construction
Cadmium Plated To Resist Corrosion
Easy Installation

from

$405.99

Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli

Product Features:

Standard Impeller Rotation
0.625 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
4.50 in. Block To Hub Height
Black Finish

from

$61.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$78.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants

from

$414.99

Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$257.99

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

Product Features:

Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
O.D.: 1.437″, I.D.: 1.039″
Single valve springs with damper
Approximately .510″ max lift at recommended installed height

from

$25.99

Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:

Chrome Plated Steel
F-Style
Heavy Gauge Steel Construction
Fits Small Block Chevy 265-400 CID
Must Be Used With Part 9852

from

$199.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

from

$611.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$316.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$93.99

Product Features:

Water/Weather Resistant
Re-Useable
Will Not Burn Or Blow Out
Suitable For Port-Matching
Made In USA

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Upgrade your 1983 Pontiac Bonneville with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1983 Pontiac Bonneville, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Bonneville functioning at its best. At Advance Auto Parts, we offer a wide selection of 320 Performance and Racing Products for the 1983 Pontiac Bonneville, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Fuel Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1983 Pontiac Bonneville at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $1,645.99, with an average price of $229.77. Our 320 Performance and Racing Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 1983 Pontiac Bonneville without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Pontiac Bonneville, we stock popular OEM and aftermarket Performance and Racing Products from top names like Edelbrock, FEL-PRO Performance, Competition Cams, and more. Edelbrock Performance and Racing Products start at just $195.99 and boast an impressive 4.4 stars average rating from customers. FEL-PRO Performance and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $31.49, and at an average 4.2 stars rating. With 886 customer reviews and counting, our 1983 Pontiac Bonneville Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Pontiac Bonneville is always ready to roll. We’re committed to providing you with everything you need to keep your Bonneville in top shape, all in one place. Start shopping confidently below for your 1983 Pontiac Bonneville!

Best-Selling Performance Oil Filters for 1983 Pontiac Bonnevilles

Enhance the driving experience in your Pontiac with 2 quality Performance Oil Filter components, starting at $17.99.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Most Popular 1983 Pontiac Bonneville Performance Fuel Systems

Customize your Pontiac with 15 Performance Fuel Systems products like Performance Fuel Pumps, Performance Carburetors, and Performance Fuel Pump Pushrods, all priced under $699.99.

show more show less

from

$13.99

This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$518.99

The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$499.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$138.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

Street Performance
Flows 80 gph Free Flow
Shutoff Pressure Pre-Set 7.5 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 1/4 in. NPT
Inlet/Outlet Tapped For .25 in. NPT

from

$682.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$414.99

from

$12.99

Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:

Necessary if switching to electric fuel pump
Includes block off plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Street Ready; Out Of The Box

from

$430.99

from

$407.99

Product Features:

Satin Finish
4 Barrel
Annular Booster Type
Manual Choke Type
750 cfm Maximum Flow Rating

from

$226.99

Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

Product Features:

High Output Fuel Flow
Flows 170 gph Free Flow
Shutoff Pressure Pre-Set At 8 PSI
Fuel Pressure Regulator Required Recommend P/N 12-704
Heavy Duty Construction For Continuous High rpm Operation
Redesigned High Flow Valves Ensure Adequate Fuel Delivery
Fuel Body Casting Can Be Rotated For Plumbing Situations
3/4in.-16 Inlet And Outlet Ports

from

$48.99

When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:

Lightweight tubing with bronze tip for steel cams
5.75″ Length
Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod

Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket

from

$38.99

Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket

Fuel Pump Pushrod with Steel Tip for Small Block Chevrolet

from

$24.99

Fuel Pump Pushrod with Steel Tip for Small Block Chevrolet

Top Picks for 1983 Pontiac Bonneville Performance Air Filters

Upgrade Pontiac Bonnevilles with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 1983 model.

show more show less

from

$41.49

Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.

Product Features:

Designed to be superior to stock paper filters
Comes pre-oiled
Designed for an easy installation with OE fit
Made with pre-dyed media for lasting color

In-Demand Performance Exhaust Products for 1983 Pontiac Bonnevilles

Select from 7 premium Performance Exhaust Products parts for your 1983 Pontiac Bonneville, with prices ranging from $31.49 to $149.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$136.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$134.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$46.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

Withstands Intense Exhaust Heat
Reusable header, exhaust manifold and collector flange gaskets
Resists Deteriorating
Manufactured from “dead soft” aluminum layers – .125″ thick
Easy Removal For Disassembly
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$44.99

Original equipment style bracket in high quality chrome for years of service. Includes hardware.

Product Features:

Chrome Plated Heavy Gauge Steel
Can Be Used For Other Applications
Looks Better Than Painted
Hardware included

from

$149.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Most Sold 1983 Pontiac Bonneville Performance Engines

Explore our best-selling Pontiac parts for the 1983 Bonneville among 212 OEM and aftermarket options starting from $7.99.

show more show less

from

$195.99

Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!

Product Features:

Maximizes Performance with Edelbrock Carburetors
Runners Tuned to Match Square Bore Carburetor
Maximizes Peak Torque Around 3500 RPM
Excellent Throttle Response and Mid-Range Power
For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
PLEASE NOTE: Will not fit under stock Corvette hood!

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$270.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes

from

$223.99

VALVE SEALS, O-RING 11/32″ 1 ST

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$217.99

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:

Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
For applications with less than 350 lbs. of open spring pressure
Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
Ultimate street roller rocker arm designed for serious performance enthusiasts

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$433.99

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al

Product Features:

Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Increase engine power, enhance valve train stability and improve oiling
Designed for high performance street and race engines
Arced channel & contoured top give the rockers the best strength to weight ratio possible

from

$199.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

from

$15.99

This is a high quality bolt set that is made of grade 8 steel and will meet your requirements for a quality bolt set, this set will work on original equipment, high performance street, drag or circle track applications.

Product Features:

Has A Zinc Dichromate Finish
Made Of High Quality Grade 8 Steel
Has A Tall Hex Head To Prevent Wrench Slipping Off
Extra Thick Parallel Ground Washer
Washer Provides More Accurate And Uniform Torque

from

$34.99

Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:

Edge Molded Rubber Water Outlet Gasket Is Reusable
Requires No Gasket Sealer
Solid Aluminum Carrier For Strength/rigidity
Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled

from

$29.99

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$29.49

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$302.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$914.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
295/313 Advertised Duration, 243/257 Duration @ .050″, .500″/.486″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$28.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$449.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$9.99

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$31.99

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$20.99

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

Top-Rated Performance and Racing Products Brands For Your 1983 Pontiac Bonneville

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1983 Pontiac Bonnevilles. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, FEL-PRO Performance, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1983 Bonneville start at just $31.49 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Edelbrock 1983 Pontiac Bonneville Performance and Racing Products

When it comes to maintaining or upgrading your 1983 Pontiac Bonneville, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1983 Pontiac Bonneville. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $195.99, with an average price of just $328.66. Plus, with over 13 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $195.99

(7)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

“Removed a Weiand Stealth manifold and replaced with the Edelbrock, while doing a dyno test – increased HP & Torque on a modified 350, very good for st”

from $518.99

(3)

Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

“only required idle mixture and idle speed adjustments.”

from $270.99

(3)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

“Get the matching carb, increased HP by 50 points”

Popular FEL-PRO Performance 1983 Pontiac Bonneville Performance and Racing Products

FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1983 Pontiac Bonneville owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1983 Bonneville, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $31.49 to $44.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $31.49

(2)

Exhaust Manifold Gasket Set

“Appear to be A-OK on my Chevrolet as far as fitment”

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“Racing application”

FAQs for 1983 Pontiac Bonneville Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1983 Pontiac Bonnevilles?

Out of 320 Performance and Racing Products that fit 1983 Pontiac Bonnevilles, the following parts are the top sellers:

Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (20291377) – $134.99
High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99

What’s the price range for 1983 Pontiac Bonneville Performance and Racing Products?

Performance and Racing Product prices for the 1983 Pontiac Bonneville start at $7.99 and go up to $1,645.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1983 Pontiac Bonneville?

The average price for Performance and Racing Products for the 1983 Pontiac Bonneville is $229.77. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Bonneville model years?

Yes, we currently carry Performance and Racing Products for 47 model years of Pontiac Bonnevilles between 1957 and 2005. Performance and Racing Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Performance and Racing Products for my 1983 Pontiac Bonneville?

The cheapest 1983 Pontiac Bonneville Performance and Racing Products we carry in stock are:

High Energy 7.794" Long, 5/16" Diameter Pushrod (50289688) – $7.99
Tie Rod Dust Boot (17360821) – $9.99
Bolt Kit Intake Hex Head (22905656) – $9.99
Tie Rod Dust Boot (22906874) – $9.99
Ball Joint Dust Boot Set (22906820) – $9.99

What are the top-rated Performance and Racing Products that fit the 1983 Pontiac Bonneville?

Out of 886 reviews by customers, our 1983 Pontiac Bonneville Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1983 Pontiac Bonneville and their top-rated products:

Performance Steering Products
- Tie Rod Dust Boot (17360821) – $9.99
Performance Air Filters
- Tie Rod Dust Boot (17360821) – $9.99
Performance Oil Filters
- Tie Rod Dust Boot (17360821) – $9.99

What types of Performance and Racing Products do you sell for my 1983 Pontiac Bonneville?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1983 Pontiac Bonneville:

Can I get help with 1983 Pontiac Bonneville Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Bonneville Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Bonneville Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1983 Pontiac Bonneville Performance and Racing Products

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Edelbrock – Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242 (Part No.4243)

Mr. Gasket – Alternator: Remanufactured, 80 Amps (Part No.5122)

Competition Cams – Three-Piece Billet Aluminum Timing Cover for Chevrolet Small Block and V6 (Part No.310)

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

Energy Suspension – Motor Mount (Part No.3.1116G)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 12 Piece Set (Part No.1233)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Hays – Power Train (Part No.10-025)

Competition Cams – .795" Long Roller Thrust Button for Chevrolet 265-400 Small Block (Part No.200)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

Accel – Cap/Rotor (Part No.8129)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Mr. Gasket – Valve Cover (Part No.9805)

Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)

Energy Suspension – Control Arm Bushing Set (Part No.3.3169R)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)

Mr. Gasket – Alternator Bracket (Part No.9850)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam K-Kit (Part No.K51-222-4)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1423)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2006)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Edelbrock – Performer Carburetor #9903 500 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9903)

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-327-20)

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

Competition Cams – Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket (Part No.4620)

Competition Cams – Fuel Pump Pushrod with Steel Tip for Small Block Chevrolet (Part No.4616)

Spectre – Spectre Replacement Air Filter (Part No.HPR0326)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942548)

Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

Mr. Gasket – Alternator Bracket (Part No.5170)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952548)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)

Competition Cams – Set of 16 O-Ring Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.501-16)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Competition Cams – ALUMINUM GOLD ROCKER ARMS, SBC 1 ST (Part No.19001-16)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.945G)

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-602-4)

Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-210-2)

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)