1983 Plymouth Gran Fury Performance and Racing Products

Essential Performance and Racing Products for 1983 Plymouth Gran Furies

Edelbrock – Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin (Part No.8814)

Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin

from

$237.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$41.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)

Valve Cover Gasket Set for Chrysler

from

$28.99
Product Features:
  • 5/16 in. Thick
  • Conforms to warped flanges, giving them better sealing capabilities
  • Graphite-impregnated facing and steel expanded metal core
  • Does not deteriorate or crack under excessive heat and pressure
  • Sold as a pair
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Hurst – Automatic Shifter, Quarter Stick (Part No.3160009)

Automatic Shifter, Quarter Stick

from

$426.99
The award-winning Quarter Stick automatic shifter is designed to provide positive gear change control for street or racing transmission applications. Gated mechanism. NHRA/IHRA approved reverse lockout.

Product Features:
  • Forward and Reverse Shift Patterns
  • Chrome Plated Trigger for Detent Activity
  • Factory Neutral Safety Switch
  • Compact And Lightweight
  • Roller Detent with Shifter Pattern
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

Oil Pan Bolt Kit

from

$18.99
Oil Pan Bolt Kit

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Energy Suspension – Motor Mount (Part No.5.1106R)

Motor Mount

from

$52.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Edelbrock – Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines (Part No.7276)

Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines

from

$28.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

PERFORMANCE OIL PAN GASKET SET

from

$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Accel – Ignition/Electrical (Part No.8320)

Ignition/Electrical

from

$668.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3114R)

Control Arm Bushing Set

from

$48.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Spectre – Valve Cover (Part No.5277)

Valve Cover

from

$72.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1979 Chrysler Big Block 361-383-400-413-426-440 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:
  • Designed for 1958-1979 Chrysler Big Block 361-383-400-413-426-440 engines
  • Baffled for breather system compatibility
  • Sold in pairs
  • Triple chrome-plated steel construction
  • Stock height
  • Features OEM style sealing edge
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.49
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Has A Steel Core With Graphite Facing
    • Graphite Facing Has Excellent Thermo-conductivity
    • High Recovery Mat Allows For Better Seal Retention
    See More

    Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

    Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

    from

    $521.99
    Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

    Product Features:
    • Idle-5500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
    • Black Powder Coated Finish
    • Non-EGR
    See More

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

    Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

    from

    $378.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5110G)

    Sway Bar Bushing Set

    from

    $42.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (100-400+ Hp) (Part No.70082)

    Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (100-400+ Hp)

    from

    $1114.99


    Product Features:
    • Designed For Carbureted V8 Engines
    • Enhanced Flow Capacity
    • Add Power In Stages
    • Softens The Hit Of The Nitrous System
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5110R)

    Sway Bar Bushing Set

    from

    $42.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp) (Part No.70004)

    Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp)

    from

    $1113.99
    Product Features:
    • Features 10 lbs. Bottle Capacity
    • For 4500 Series Carbs
    • Between 100-250 HP
    • 2-Stage Performer RPM
    • Includes All Necessary Installation Items
    See More

    Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

    Mechanical Fuel Pump Mounting Pad Cover

    from

    $17.79
    Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

    Product Features:
    • Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
    See More

    Hays – Power Train (Part No.11-330)

    Power Train

    from

    $479.99
    Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

    Product Features:
    • Certified Billet Material
    • Borg and Beck Clutch Pattern
    • Long-Style Clutch Pattern
    • Ring Gear Securely Mounted To Prevent Spinning
    See More

    Upgrade your 1983 Plymouth Gran Fury with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1983 Plymouth Gran Fury, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Plymouth or enhancing its overall performance, Performance and Racing Products are key to keeping your Gran Fury functioning at its best. At Advance Auto Parts, we offer a wide selection of 63 Performance and Racing Products for the 1983 Plymouth Gran Fury, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1983 Plymouth Gran Fury at great prices. Our Performance and Racing Products inventory for this model ranges from just $14.29 to $1,138.99, with an average price of $322.75. Our 63 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1983 Plymouth Gran Fury without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Plymouth Gran Fury, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Mr. Gasket, FEL-PRO Performance, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Mr. Gasket and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $14.29, and at an average 4 stars rating. With 294 customer reviews and counting, our 1983 Plymouth Gran Fury Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Plymouth Gran Fury is always ready to roll. We’re committed to providing you with everything you need to keep your Gran Fury in top shape, all in one place. Start shopping confidently below for your 1983 Plymouth Gran Fury!

    Best-Selling Performance Oil Filters for 1983 Plymouth Gran Furies

    Enhance the driving experience in your Plymouth with 3 quality Performance Oil Filter components, starting at $14.29.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    Mr. Gasket – Breather/Oil Filler Cap (Part No.2059)

    Breather/Oil Filler Cap

    from

    $14.29
    Chrome plated breather cap is ideal for race car vacuum balance systems, as well as original equipment applications with positive crankcase ventilation (PCV).

    Product Features:
    • Features 1″ O.D. neck and a 5/8″ O.D. breather tube
    • Breather has Metal/Foam Baffle inside and includes Grommet
    • Fits all aftermarket valve covers with a 1.22″ Dia. opening
    See More

    Most Popular 1983 Plymouth Gran Fury Performance Exhaust Products

    Customize your Plymouth with 3 Performance Exhaust Products products like Performance Exhaust Manifold Gaskets, all priced under $38.49.

    Flowtech – Header Gasket Set (Part No.99361FLT)

    Header Gasket Set

    from

    $18.59
    Header Gasket Set

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.49
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Has A Steel Core With Graphite Facing
    • Graphite Facing Has Excellent Thermo-conductivity
    • High Recovery Mat Allows For Better Seal Retention
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

    Exhaust Manifold Gasket Set

    from

    $28.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Top Picks for 1983 Plymouth Gran Fury Performance Ignition Products

    Upgrade Plymouth Gran Furies with top-quality Performance Ignition Products parts, including 3 OEM and aftermarket selections for your 1983 model.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    In-Demand Performance Engines for 1983 Plymouth Gran Furies

    Select from 23 premium Performance Engines parts for your 1983 Plymouth Gran Fury, with prices ranging from $17.49 to $1,093.99.

    Mr. Gasket – Valve Cover Gasket Set (Part No.379)

    Valve Cover Gasket Set

    from

    $36.49
    Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-density cork/rubber blend gasket material
    • Provides excellent sealing and durability
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

    Performance Valve Cover Gasket Set

    from

    $18.99
    Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

    Product Features:
    • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1213)

    Lower Intake Manifold Gasket Set: 6 Piece Set

    from

    $38.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

    PERFORMANCE OIL PAN GASKET SET

    from

    $21.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines (Part No.7276)

    Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines

    from

    $28.99
    Product Features:
    • Clean Positive Seal
    • Embossed Silicone Bead Surrounding The Port
    • Matched To Manifolds And Cylinder Heads
    See More

    Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)

    Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines

    from

    $397.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $41.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
    • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1243)

    Lower Intake Manifold Gasket Set: 6 Piece Set

    from

    $42.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set

    from

    $30.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

    High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

    from

    $1093.99
    Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

    Product Features:
    • Good blend of efficiency and performance.
    • Perfect choice for performance street rebuilds.
    • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
    See More

    Weiand – Hi-Ram Intake Manifold (Part No.1995)

    Hi-Ram Intake Manifold

    from

    $703.99
    Hi-Ram Intake Manifold

    Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

    Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

    from

    $521.99
    Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

    Product Features:
    • Idle-5500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
    • Black Powder Coated Finish
    • Non-EGR
    See More

    Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)

    RPM Air-Gap Small Block Chrysler Intake Manifold

    from

    $473.99
    Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe

    Product Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed For 1500 To 6500 RPM
    • Dual-Plane High-Rise Intake
    • Accepts Early-Style Waterneck
    See More

    Edelbrock – Performer Intake Manifold Small-Block Chrysler (Part No.3776)

    Performer Intake Manifold Small-Block Chrysler

    from

    $449.99
    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    See More

    Edelbrock – Water Pump Chrysler 1969-85 318/ 360 in Polished Finish (Part No.8887)

    Water Pump Chrysler 1969-85 318/ 360 in Polished Finish

    from

    $426.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

    Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

    from

    $378.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

    Cylinder Head Gasket Set for Chrysler

    from

    $61.99
    Product Features:
    • Cylinder Head Gasket
    • 1966-1987 318-340-360
    See More

    Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)

    Valve Cover Gasket Set for Chrysler

    from

    $28.99
    Product Features:
    • 5/16 in. Thick
    • Conforms to warped flanges, giving them better sealing capabilities
    • Graphite-impregnated facing and steel expanded metal core
    • Does not deteriorate or crack under excessive heat and pressure
    • Sold as a pair
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Most Sold 1983 Plymouth Gran Fury Performance Fuel Systems

    Explore our best-selling Plymouth parts for the 1983 Gran Fury among 1 OEM and aftermarket options starting from $17.79.

    Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

    Mechanical Fuel Pump Mounting Pad Cover

    from

    $17.79
    Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

    Product Features:
    • Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
    See More

    Top-Rated Performance and Racing Products Brands For Your 1983 Plymouth Gran Fury

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1983 Plymouth Gran Furies. Below you’ll find some of our best rated Performance and Racing Products from K&N, Mr. Gasket, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1983 Gran Fury start at just $14.29 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1983 Plymouth Gran Fury Performance and Racing Products

    When it comes to maintaining or upgrading your 1983 Plymouth Gran Fury, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1983 Plymouth Gran Fury. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 120 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Popular Mr. Gasket 1983 Plymouth Gran Fury Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1983 Plymouth Gran Fury owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1983 Gran Fury, Advance Auto Parts carries a full inventory of 9 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Plymouth in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $14.29 to $97.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Remote Oil Filter Kit
    from
    $97.99
    This product is not rated

    Remote Oil Filter Kit

    “”

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    FAQs for 1983 Plymouth Gran Fury Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1983 Plymouth Gran Furies?

    Out of 63 Performance and Racing Products that fit 1983 Plymouth Gran Furies, the following parts are the top sellers:

    What’s the price range for 1983 Plymouth Gran Fury Performance and Racing Products?

    Performance and Racing Product prices for the 1983 Plymouth Gran Fury start at $14.29 and go up to $1,138.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1983 Plymouth Gran Fury?

    The average price for Performance and Racing Products for the 1983 Plymouth Gran Fury is $322.75. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Plymouth Gran Fury model years?

    Yes, we currently carry Performance and Racing Products for 15 model years of Plymouth Gran Furies between 1972 and 1989. Performance and Racing Products are bought most frequently for the following model years: 1989, 1988, 1987, 1986, 1985, 1984, 1982, 1981, and 1980.

    What are the cheapest Performance and Racing Products for my 1983 Plymouth Gran Fury?

    The cheapest 1983 Plymouth Gran Fury Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1983 Plymouth Gran Fury?

    Out of 294 reviews by customers, our 1983 Plymouth Gran Fury Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1983 Plymouth Gran Fury and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1983 Plymouth Gran Fury?

    Can I get help with 1983 Plymouth Gran Fury Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Plymouth Performance and Racing Products and more.

    What is your return policy for Plymouth Gran Fury Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Plymouth Gran Fury Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.